NATIONAL INSTRUMENTS PXI-2532B High-Density Multiconfiguration Matrix Switch Module Owner’s Manual
- June 12, 2024
- NATIONAL INSTRUMENTS
Table of Contents
COMPREHENSIVE SERVICES
We offer competitive repair and calibration services, as well as easily accessible documentation and free downloadable resources.
SELL YOUR SURPLUS
We buy new, used, decommissioned, and surplus parts from every NI series.
We work out the best solution to suit your individual needs.
Sell For Cash Get Credit Receive a Trade-In Deal
OBSOLETE NI HARDWARE IN STOCK & READY TO SHIP
We stock New, New Surplus, Refurbished , and Reconditioned NI Hardware.
Bridging the gap between the manufacturer and your legacy test system.
1-800-915-6216
www.apexwaves.com
sales@apexwaves.com
All trademarks, brands, and brand names are the property of their respective owners.
Request a Quote CLICK HERE PXIe-2532B
Letter of Volatility
PXI/PXIe-2531/32/32B
Manufacturer: National Instruments
Board Assembly Part Numbers (Refer to Procedure 1 for identification procedure):
| Part Number and Revision | Description |
|---|---|
| 199391A-01L or later | PXI-2531 |
| 190982A-01 or later | PXI-2532 |
| 153874A-01L or later | PXI-2532B |
| 150040A-01L or later | PXIe-2531 |
| 198534A-01 or later | PXIe-2532 |
| 153875A-01L or later | PXIe-2532B |
Volatile Memory
Target Data
| Type| Size| Battery Backup| User1 Accessible| System
Accessible| Sanitization Procedure
---|---|---|---|---|---|---
Relay scanlists | SRAM| 128 KB| No| No| Yes|
Cycle Power
Relay counts, states
| FPGA Block RAM| 150 KB | No| No| Yes|
Cycle Power
Non-Volatile Memory (incl. Media Storage)
Target Data|
Type
| Size| Battery Backup| User1 Accessible| System Accessible|
Sanitization Procedure
---|---|---|---|---|---|---
Device configuration|
Flash
| |
No
| | |
• PCI configuration data, and serial number| | 4Mb| | No| Yes|
None
• Relay module config, and relay cycle counts| | 4Mb| | No| Yes|
None
Relay drivers|
CPLD
| 128 Macrocells | No| No| Yes|
None
¹ Refer to Terms and Definitions section for clarification of User and System Accessible
Procedures
Procedure 1 -Board Assembly Part Number Identification:
To determine the Board Assembly Part Number and Revision, refer to the label
applied to the surface of your product. The Assembly Part Number should be
formatted as “P/N: ######A-##L
Terms and Definitions
Cycle Power:
The process of completely removing power from the device and its components
and allowing for adequate discharge. This process includes a complete shutdown
of the PC and/or chassis containing the device; a reboot is not sufficient for
the completion of this process.
Volatile Memory:
Requires power to maintain the stored information. When power is removed from
this memory, its contents are lost. This type of memory typically contains
application specific data such as capture waveforms.
Non-Volatile Memory:
Power is not required to maintain the stored information. Device retains its
contents when power is removed. This type of memory typically contains
information necessary to boot, configure, or calibrate the product or may
include device power up states.
User Accessible:
The component is read and/or write addressable such that a user can store
arbitrary information to the component from the host using a publicly
distributed NI tool, such as a Driver API, the System Configuration API, or
MAX.
System Accessible:
The component is read and/or write addressable from the host without the need
to physically alter the product.
Clearing:
Per NIST Special Publication 800-88 Revision 1, “clearing” is a logical
technique to sanitize data in all User Accessible storage locations for
protection against simple non-invasive data recovery techniques using the same
interface available to the user; typically applied through the standard read
and write commands to the storage device.
Sanitization:
Per NIST Special Publication 800-88 Revision 1, “sanitization” is a process to
render access to “Target Data” on the media infeasible for a given level of
effort. In this document, clearing is the degree of sanitization described.
March 2017
376514B-01 Rev 002
This document is subject to change without notice.
For the most recent version, visit ni.com/manuals.
Contact: 866-275-6964
support@ni.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>