dji BS65 Intelligent Battery Station User Guide

dji BS65 Intelligent Battery Station

Product Information

• Product Name: BS65 Intelligent Battery Station
• Version: v1.0
• Model Number: YCBZSS00243403

Product Usage Instructions

1. Padlock Holes: These holes are provided for attaching padlocks to secure the battery station.
2. Lock Clip: This clip is used to secure the handlebar in place.
3. Handle Bar: The handlebar is used to carry the battery station.
4. Retractable Trolley Handle: Pull out the trolley handle to easily transport the battery station.
5. AC Power Port: Connect the AC power adapter to this port for charging the battery station.
6. TB65 Battery Port: Insert the TB65 batteries into this port for charging.
7. WB37 Battery Port: Insert the WB37 batteries into this port for charging.
8. USB-C Charging Port: Use this port to charge devices with a USB-C connection.
9. USB-A Charging Port: Use this port to charge devices with a USB-A connection.
10. Battery LEDs: The LED indicators show the battery level of the TB65 batteries.
11. WB37 Battery LEDs: The LED indicators show the battery level of the WB37 batteries.
12. Charging Mode Switch: Use this switch to select the charging mode.
13. Charging Mode LEDs: The LED indicators show the selected charging mode.

Disclaimer
By using this product, you acknowledge that you have read, understood, and accepted the terms and conditions as stated in the user manual and at https://enterprise.dji.com/matrice-350-rtk. The product and all associated materials and content are provided “as is” without any warranties or conditions, except as expressly provided in the after-sales service policies available at https://www.dji.com/service/policy.

OVERVIEW

1. Padlock Holes
2. Lock Clip
3. Handle Bar
4. Pressure Valve
5. Retractable Trolley Handle
6. AC Power Port
7. TB65 Battery Port
8. WB37 Battery Port
9. USB-C Charging Port
10. USB-A Charging Port
11. TB65 Battery LEDs
12. WB37 Battery LEDs
13. WB37 Battery Level LEDs
14. USB-C Maintenance Port
15. Power Button
16. Battery Station LED
17. Charging Mode Switch
18. Charging Mode LEDs

Disclaimer
By using this product, you signify that you have read, understand, and accept the terms and conditions of this guideline and all instructions at https://enterprise.dji.com/matrice-350-rtk. EXCEPT AS EXPRESSLY PROVIDED IN AFTER-SALES SERVICE POLICIES AVAILABLE AT https://WWW.DJI.COM/SERVICE/POLICY. THE PRODUCT AND ALL MATERIALS AND CONTENT AVAILABLE THROUGH THE PRODUCT ARE PROVIDED “AS IS” AND ON AN “AS AVAILABLE BASIS” WITHOUT WARRANTY OR CONDITION OF ANY KIND.

Warnings

1. Keep liquids away from the inside of the battery station.
2. DO NOT close the cover of the battery station when charging. Make sure it is well-ventilated and able to dissipate heat.
3. The battery station is only compatible with the TB65 Intelligent Flight Battery and WB37 Intelligent Battery. DO NOT attempt to use the battery station with other battery models.
4. Place the battery station on a flat and stable surface when in use. Make sure the device is properly insulated to prevent fire hazards.
5. DO NOT attempt to touch the metal terminals on the battery ports. Clean the metal terminals with a clean, dry cloth if there is any noticeable buildup when powered off.
6. Take care to avoid injuring your fingers when opening or closing the battery station.

Introduction

The BS65 Intelligent Battery Station features eight TB65 battery ports, four WB37 battery ports, a USB-C maintenance port, a USB-C charging port and a USB-A charging port. It can charge two TB65 batteries and one WB37 battery simultaneously.

Using the Battery Station (Figure A)

1. Connect the battery station to a power outlet using an AC power cable.
2. Press the power button once to power the battery station.
3. Charging the TB65 batteries:
   • a. Align the orange marks on the TB65 battery and the battery port, then insert the batteries into the battery ports.
   • b. Toggle the charging mode switch to Storage Mode, Ready-to-Fly Mode, or Standard Mode.
   • Storage Mode : Each battery pair is charged to 50% in sequence and kept at 50% after charging. Storage Mode is good for long-term battery storage.
   • Ready-to-Fly Mode : Each battery pair is charged to 90% in sequence and kept at 90% after charging. Ready-to-Fly Mode facilitates quick use of batteries.
   • Standard Mode : Each battery pair is charged to 100% in sequence.
   • c. The battery station will charge the batteries in pairs. The pair with the highest power will be charged first.
4. Charging the WB37 batteries: Insert the WB37 batteries, and the battery with the highest battery level will be charged first.
5. Charging the DJI RC Plus remote controller: Connect the remote controller to the USB-C charging port using a USB-C to USB-C cable.
   • The battery station should stay powered on to maintain the battery level in Storage Mode and Ready-to-Fly Mode. Maintaining a high power level in Ready-to-Fly Mode will affect battery life. Power off the battery station after charging, except for special situations such as fire emergencies.
   • Connect the remote controller to the maintenance port and run DJI Pilot 2 to view battery information, update the firmware, or diagnose the error. When the temperature of the TB65 battery is below 18° C (64.4° F), the batteries will be automatically warmed up after being inserted into battery station and powered on.

Paired Charging of Batteries (Figure B)

TB65 batteries should be used in pairs to extend battery life. Inserted batteries in the top and bottom ports will be automatically paired in the sequence of A, B, C, and D. The charging sequence is illustrated below:

• Between paired and a single battery, paired batteries will be charged first. (Figure B-1)
• When there are multiple battery pairs, the pair with the highest power will be charged first. (Figure B-2)
• When none of the batteries are paired, the two batteries with the highest battery level will be charged first. (Figure B-3)

When the power of the batteries in one pair is not the same, the battery station will charge the one with less power first, and then charge the paired batteries together once their power is the same

LEDs and Buzzer Description

Connect the remote controller to the maintenance port, run DJI Pilot 2, and tap HMS to diagnose the error.

Specifications

Charging times are tested in a lab environment at room temperature. The values provided should be used for reference only.

Compliance Information

FCC Compliance Notice

• Supplier’s Declaration of Conformity
• Product name: BS65 Intelligent Battery Station
• Model Number: BS65
• Responsible Party: DJI Technology, Inc.
• Responsible Party Address: 435 Portage Ave, Palo Alto, CA 94306
• Website: www.dji.com.

We, DJI Technology, Inc., being the responsible party, declare that the above- mentioned model was tested to demonstrate compliance with all applicable FCC rules and regulations. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CAN ICES-003 (A) / NMB-003(A)

Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device (BS65 Intelligent Battery Station) is in compliance with the essential requirements and other relevant provisions of Directive 2014/35/EU.
A copy of the EU Declaration of Conformity is available online at www.dji.com /euro-compliance.
contact address: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device (BS65 Intelligent Battery Station) is in compliance with the essential requirements and other relevant provisions of Electrical Equipment (Safety) Regulations 2016. A copy of the GB Declaration of Conformity is available online at www.dji.com/euro-compliance.
Environmentally friendly disposal
Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycling valuable raw materials and the treatment of toxic substances. www.quefairedemesdechets.fr.

Contact DJI SUPPORT

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>