TUO TCS-07505 Contact Sensor User Manual
- June 12, 2024
- TUO
Table of Contents
TUO TCS-07505 Contact Sensor
Product Information
The TUO Contact Sensor is a device designed to detect contact between two objects, such as a door or window, and send a signal to a compatible platform or system. It can be easily installed using screws or tape, and it comes with a removable backplate for mounting.
It is important to note that the TUO Contact Sensor contains a magnet and should be kept away from people with pacemakers or other medical devices that may be affected by magnetic fields. To avoid any potential harm or interference, it is recommended to keep the device at a safe distance from these individuals.
This device complies with part 15 of the FCC rules and operates without causing interference. However, if it does cause harm to television reception, measures such as re-orienting or relocating the receiving antenna can be taken to correct the interference.
Please keep your Matter Setup Code in a safe place as you will need it to securely add the TUO Contact Sensor to your home.
Product Usage Instructions
- To perform a soft reset, push the button on the front of the TUO Contact Sensor. The green light will begin to flash when a reboot is successful.
- To completely reset the device, push and hold the button on the front of the TUO Contact Sensor for 5 seconds. Please note that this will remove the device from the platform you are using and will require re-pairing.
- To install the Contact Sensor, choose either screws or tape to mount it on the door or window. The backplate can be removed from the TUO Contact Sensor for easier installation.
Getting started
Press the button on the front of the contact sensor to activate.
Pairing & activation
Pair the TUO Contact Sensor to the home hub of your choice. Ensure your network has a compatible read Border Router.
To learn more about read Border Routers, head to http://findtuo.com/borderrouter
Remove the backplate and flip it over to reveal the pairing code. Scan or type in the manual pairing code in the platform of your choice.
Battery replacement
When it is time to replace the battery, simply turn the TUO Contact Sensor around and remove the backplate.
Resetting the device
To preform a soft reset, push the button on the front of the TUO Contact
Sensor. The green light will begin to flash when a reboot is successful.
Push it in and hold for 5 seconds to completely reset the device. Please note
that this will remove the device from the platform you are using and will
require re-pairing.
Backplate mounting
The backplate can be removed from the TUO Contact Sensor and can be mounted by
screws or tape to the door / window. 
Warning
Magnet warning: This device contains a magnet and should be kept away from
people with pacemakers or other medical devices that may be affected by
magnetic fields. It is important to keep the device at a safe distance from
these individuals to avoid any potential harm or interference with their
medical devices.
Please note that failure to follow the safety instructions and warnings provided in the user manual may result in injury, damage to property, or other harmful consequences.
Legal information
This is device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. It is device generates uses and can radiate radio frequency energy, and if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this device does cause harm to television reception, which can be determined by turning the equipment of˙ and on, you are encouraged to try to correct the interference by one or more of the following measures:
- Re-orient or relocate the receiving antenna,
- Increase separation between the equipment and receiver, or
- Consult a dealer or an experienced radio/TV technician for help.
- Changes or modifications not expressly approved by TUO Accessories LLC can void the user’s authority to operate this device.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
Please keep your Matter Setup Code in a safe place. You need it to securely add TUO Contact Sensor to your home.
findtuo.com
Model: TCS-07505 • FCC ID: 2BA2K-TCS-07505
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>