Shen Zhen Shi Meng Zhi Tuo Ke Ji You Xian Gong Si D100BL LED Floodlight Instruction Manual

Shen Zhen Shi Meng Zhi Tuo Ke Ji You Xian Gong Si D100BL LED Floodlight

How to pair the LED Light

1. Power on the LED Light.
2. Power it off three times quickly until it flashes, which indicates that the floodlight has entered pairing mode.
3. Tap the confirmation button to pair the LED Light.
4. Wait till it is successfully connected.

Note: If the LED Light is still flashing until the progress map reaches 100%, the pairing fails, and you will need to repeat the previous 4 steps to pair the LED Light.

Name the LED light and tap “Done”

You will find the device you’ve named is shown on the App homepage. Tap the device to enter the setting page. You can now control the light with Smart Life App. on this setting page.

COMPONENTS AND STRUCTURE

1. Tempered Glass Lid
2. LED Light Source
3. Lamp Bracket
4. Antenna

NOTE

1. Make sure that the distance between the light and the object being lit is more than 1 meter, so as to avoid high temperature caused by short distance.
2. Earth wire is required for connection for electric safety.
3. Lights that are not suitable for covering with thermal insulation materials.

Limitations of Indoor and Outdoor Use

1. This light is waterproof and dustproof. It is protected against rain, but it cannot be immersed in water.
2. The mounting position of this light should be able to bear at least 10 times as heavy as the light.
3. This light is powered by a High Voltage Alternating Current (HVAC). It should be connected to the ground wire and kept away from easy reach.
4. This light should be used in conditions with sound heat dissipation. The working temperature of it should be less than 40°C. Overhigh working temperature will cause serious lumen depression and affect the lifespan of the light.

INSTALLATION STEPS

• Step 1: According to the spacing (see the “A” part of the picture) of two screw bits on the LED Light bracket, drill two mounting holes.
• Step 2: Put the bracket onto the prepared mounting holes and then screw it on.
• Step 3: Adjust the beam direction as you like, and then plug into the main socket.

NOTE: Recommended installation height not higher than 5 m (16.4 ft)

OPERATION & MAINTENANCE

• Prior to cleaning the light, make sure it has been disconnected from the power supply.
• The unit is not suitable for burglar alarm systems as it is not tamperproof in the manner prescribed for such systems.
• Never use any chemicals or corrosive substances for cleaning.

DISPOSAL

Electrical and electronic equipment, accessories and packaging must be recycled in an environmentally compatible manner. Do not dispose of electrical and electronic equipment as domestic waste.

Manufacturer / Hersteller:
Shen Zhen Shi Meng Zhi Tuo Ke Ji You Xian Gong Si Address: qian wan yi lu 1 hao A dong 201 shi qian hai shen gang  he zuo qu Shen Zhen, Guang Dong, 518000, CN support@onforuled.com www.onforuleds.com EU REP MDH LIGHTING LTD Suite 302, 292 Strovolos Avenue, 2048 Strovolos Nicosia, Cyprus | support@onforuled.com 69 Aberdeen Avenue, Cambridge CB2 8DL, United Kingdom | support@onforuled.com Made in China UK REP MDH LIGHTING LTD

References

• Onforu LED Light - Colorful LED Lights Make Your Life More Colorful

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>