Cobra CPI500W Power 500W Power Inverter User Guide

Power 500W
Power Inverter
QUICKSTART GUIDE

POWER 500W Features

A. Negative Power Input Terminal
B. Cooling Fan – regulate the temperature of the inverter, turning on when the temperature exceeds the preset limit and turning off when the temperature reduces
C. Positive Power Input Terminal
D. USB-A Fast Charge port (5V/9V/15VV) E. Power/Fault LED Indicator
F. USB-C Fast Charge port (5V/9V/15VV)
G. Port for Cobra Remote On/Off Controller with Fast Charge USB (Sold Separately)*
H. (2) GFCI Protected AC Outlets
I. Power Switch
J. Power Cables
K. 12 Volt Accessory Cable (for vehicle accessory port)
L. Cobra Remote On/Off Controller with Fast Charge USB (Sold Separately)’

Connecting Directly To A Vehicle Battery

1. Mount the inverter inside the vehicle in a well-ventilated location close to the battery

2. Disconnect the NEGATIVE (-) or black battery terminal of the vehicle

3. Route cables close to the battery

4. Install the insulated terminal boots on the inverter end of the power cables (RED = positive, BLACK = negative)

5. Connect the BLACK Cable to the Negative (-) terminal on the Inverter

6. Connect the RED Cable to the Positive (+) terminal on the Inverter

7. Connect the other end of the RED cable to the (+) terminal on the vehicle battery

8. Visually inspect and make sure the red wire or its connectors are not touching any metal parts of the vehicle or the black wire connectors

9. Connect the other end of the BLACK cable to the (-) terminal on the vehicle battery.
   Caution: There is norm* a spark at the point of contact at the negative terminal

10. Check all connections making sure the RED cable is connected to the POSITIVE (+) terminals and the BLACK cable is connected to the NEGATIVE (-) terminals

11. Press the POWER button to turn on your inverter

Connecting To A Vehicle Accessory Port

1. Mount your inverter in a well-ventilated area of the vehicle
2. Remove the thumb cap on the inverter for each terminal
3. Connect the RED (+) 12V Accessory Cable ring terminal to the RED (+) inverter terminal.
4. Screw the thumb cap back on the RED (+) inverter terminal
5. Connect the BLACK (-) 12V Accessory Cable ring terminal to the BLACK (-) inverter terminal.
6. Screw the thumb cap back on the BLACK (-) inverter terminal
7. Plug the 12V Accessory Cable into vehicle accessory port’
8. Place the power switch into the ON position by pressing the left side of the switch to turn ON your inverter. Place the power switch into the OFF position by pressing the right side of the switch to turn OFF your inverter

The 12V Accessory Cable can support on average up to 120 Watts. Do not overload. Please refer to your vehicle manual for the maximum load your vehicles accessory port can handle

Thank you for purchasing the Cobra POWER 500 Watt Inverter (Model CPI500W)

The POWER 500W is ideal for travelers, campers, RV enthusiasts or for when a power outage occurs. Count on Cobra for Power Where You Need It.
Download the full CPI500W manual at: cobra.com/manuals

Cobre and the snake design are registered trademarks of Cobra Electronics Corporation, USA.
Cobra Electronics Corporation is a trademark of Cobra Electronics Corporation, USA.
Other trademarks and trade names are those of their respective owners.
©2020 Cobra Electronics Corporation

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>