COMICA LINKFLEX AD2 XLR/6.35mm Audio Preamp Adapter, Interface for Camera and Smartphone User Manual
- June 12, 2024
- COMICA
Table of Contents
COMICA LINKFLEX AD2 XLR/6.35mm Audio Preamp Adapter, Interface for Camera
and Smartphone
Product Information
The COMICA LINKFLEX AD2 is an XLR/6.35mm audio preamp adapter/interface designed for use with cameras and smartphones. It features universal compatibility, support for 48V phantom power, audio preamp and gain control, and mic/device two ways audio monitoring. The adapter has a belt-clamp and magic tape design at the bottom for easy attachment.
Main Features
- XLR/6.35mm (For Instrument like Guitar etc.) Audio Adapter Interface
- Universal for Camera and Smartphone
- Support 48V Phantom Power
- Audio Preamp and Gain Control
- Mic/Device (Phone) Two Ways Audio Monitor
- Belt-clamp and Magic-tape Design at the Bottom
Notice:
- When using the adapter with other high-sensitivity products, adjust the gain to avoid sonic boom or howling. It is recommended to start with the minimum gain setting and gradually increase as needed.
- When using with Lightning devices, use the original adapter cable.
- For smartphones with Android system, the mic may not be compatible with some smartphones in video mode. It is suggested to try using third-party apps like TikTok or Kwai. For smartphones with iOS system, the mic works well in both audio and video mode.
- Avoid dropping, colliding, or pounding the product as it is a high-precision instrument.
- Do not use the adapter near heat sources or interference sources such as radiators, ovens, refrigerators, or air conditioners.
- Keep the product in a dry environment.
Packing List:
- Audio Adapter/Interface
- Belt Clamp
- XLR/6.35mm Audio Preamp Adapter/Interface for Camera and Smartphone
- Magic-tape
- User Manual
- Warranty Card
Product Usage Instructions
Battery Installation:
- Press the battery cover and open it in the direction of the arrow.
- Install the 9V battery according to the corresponding positive and negative poles.
Note: Ensure the positive and negative poles of the battery match the product.
Usage Method:
- Hang the belt clamp on the belt for use.
- Pass the magic tape through the magic tape fixing slot and attach it to the fixer for use.
Audio Input:
This product supports XLR/6.35mm audio jack. When using, insert the microphone
plug into the corresponding jack.
Note: The 6.35mm and XLR inputs are in the same jack and cannot be used
simultaneously.
Installation Method (Using XLR Audio Plug):
- After installing the recording device, adjust the output mode according to the device:
- : Smartphone Mode
- : Camera Mode
- After installing the monitor headphones, adjust the monitor mode according to requirements:
- : Smartphone Playback Monitoring Mode
- : Microphone Real-time Monitoring Mode
- Step 1: Install the microphone.
- Step 2: Install the monitor headphones.
Foreword
Thanks for purchasing COMICA LINKFLEX AD2
Main Features
- XLR/6.35mm (For Instrument like Guitar etc.) Audio Adapter Interface
- Universal for Camera and Smartphone
- Support 48V Phantom Power
- Audio Preamp and Gain Control
- Mic/Device (Phone) Two Ways Audio Monitor
- Belt-clamp and Magic-tape Design at the Bottom
Notice
- When working with other products which have high sensitivity, the gain of our product should be adjusted to the appropriate position to avoid the situation of sonic boom or howling (it is recommended to adjust the gain to the minimum state when the product is turned on, and then adjust it step by step)
- When using with Lightning devices, please use the original adapter cable
- For smartphones with Android system, this Mic works well in audio mode, it may not be compatible with partial smartphones in video mode (Then we suggest you to try the 3rd party APP, such as TikTok, Kwai, ect.)
- For smartphones with iOS system, this Mic works well in audio&video mode and the 3rd party APP
- This product belongs to high-precision instruments, please avoid falling, collision or pounding
- Do not use this equipment in the vicinity of heat source or interference source, such as radiator, oven, refrigerator or air conditioner
- Please keep the product in a dry environment
Packing List
Components and Instruction
- XLR Audio Input Jack
- 6.35mm Audio Input Jack
- Gain-Control Knob
- Power / Phantom Power Switch
- Phone/Camera Audio Output Switch
- Phone/Mic Monitor Switch
- 3.5mm Audio Output Plug
- Power Indicator Light
- Phantom Power Indicator Light
- 3.5mm Audio Monitor Output Jack
- Battery Cover
- Magic-tape Fixing Slot
- Belt Clamp
Installation and Usage
Battery installation
Press the battery cover and open it in the direction of the arrow.Install the
9V battery according to the corresponding positive and negative poles
Please note that the positive and negative poles of the battery should corresponding to the positive and negative poles of the product
Usage method
Hang the belt clamp on the belt to use
Pass the Magic-tape through the Magic-tape Fixing Slot and attach it to the fixer for use
Audio input
This product supports XLR/6.35mm audio jack, please insert the microphone plug
into the corresponding jack when using
The 6.35mm and XLR are in the same jack and cannot be used at the same time
Installation method (Take XLR audio plug for example)
Step 1:
Install the microphone
Step 2:
Install the monitor headphone
Step 3:
Install the recording device (smartphone or camera)
-
After installing the recording device, adjust the output mode according to the device
:Smartphone Mode
:Camera Mode -
After installing the monitor headphones, please adjust the monitor mode according to the requirements
:Smartphone Playback Monitoring Mode
:Microphone Real-time Monitoring Mode
Gain-control knob
Rotate the audio gain-control knob to adjust the gain of the audio input Audio
Input
MIC/Smartphone monitoring switch
:Smartphone Playback Monitoring Mode :Microphone Real-time Monitoring Mode
In the camera output mode, the switch does not work and only the microphone real-time monitoring works
Smartphone/Camera output mode switch
:Smartphone Output Mode; :Camera Output Mode
Without the correct switch to the corresponding output mode will result in an unsuccessful recording
Power/ Phantom power switch
- OFF: Turn off
- ON: Turn on
- PH: Phantom Power
If your microphone requires phantom power to work, please set the switch to PH
Tech Parameters
Input
| XLR x 1
6.35mm x 1
---|---
Audio Output| 3.5mm TRS
Monitoring Output| 3.5mm TRS/TRRS
Frequency Response| 20Hz~20kHz, ±1dB
Gain| Maximum 20dB
THD| <0.1%, RL=2kO, f=20Hz~20kHz, Vo=1Vrms
Battery| 9V 6LR61/6F22 x 1
Consumption
| Phantom Power OFF: 60mW
Phantom Power ON: 130mW
Net Weight| 109g
Dimension| 53 x 43 x 102mm
Working Temperature| 0℃ ~ +50℃
Storage Temperature| -20℃ ~ +60℃
Website: comica-audio.com
Facebook: Comica Audio Tech Global
Instagram: Comica Audio
You Tube: Comica Audio
The COMICA LOGO is trademark which is registered and owned by Commlite
Technology Co.,Ltd
Email: support@comica-audio.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>