IOGEAR GUD3C8K2P USB-C 8K Nano Dock Pro User Guide

: June 12, 2024
: Iogear

Table of Contents

Package Contents
System Requirements
Overview
Monitor Configuration
Hardware Installation
Contact
Compliance Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Quick Start Guide USB-C,’ 8K Nano Dock Pro’
GUD3C8K2P PART NO. 01650
www.iogear.com

Package Contents

1 x GUD3C8K2P
1 x Quick Start Guide
1 x Warranty Card

System Requirements

USB-C Tie’ compatible laptops with DP Alt-Mode support
USB-C AC Adapter from Laptop is needed for Power Delivery Pass-Through Function
Compatible with Thunderbolt”‘ 3 or 4 laptops
OS Support -Windows® 10 and 11 -macOSs 13+ (MST is not supported by mac OS)

Overview

A. USB-C connector to host laptop
B. USB-C PD Pass-through port (Up to 100W pass-through)
C. HDMI 2 output (Up to 8K @30Hz) IOGEAR GUD3C8K2P USB C 8K Nano Dock Pro -
Overview

D. HMI,’ 1 output (Up to 4K @30Hz)
E. USB-A 2.0 port
F. USB-A 2.0 port
G. USB-A 3.0 port

Monitor Configuration

Single Monitor	HDMI 1

macOS 3840×2160 @30Hz (DP 1.4 host)
Win OS 3840×2160 @30Hz (DP 1.4 host)
HDMI 2
macOS 7680×4320 @30Hz (DP 1.4 host)
Win OS 7680×4320 @30Hz (DP 1.4 host)
Dual Monitor| HDMI 1
macOS (mirror) 3840×2160 @30Hz (DP 1.4 host)
Win OS (extended) 3840×2160 @30Hz (DP 1.4 host) Win OS (extended)3840×2160 @30Hz (DP 1.4 host)
HDMI 2
macOS (mirror) 3840×2160 @30Hz (DP 1.4 host)
Win OS (extended) 3840×2160 @60Hz (DP 1.4 host)
Win OS (mirror) 3840×2160 @30Hz (DP 1.4 host)

Hardware Installation

Turn on the host laptop then connect the laptop’s USB-C power adapter to the USB-C PD3.0 port on the GUD3CO5B (optional)’.
Connect the external USB devices (Keyboard, Mouse, etc.) to the appropriate ports on the GUD3C8K2P as needed.
Connect the external monitor(s) to the appropriate video outputs2.
Connect the tethered USB-C cable on the GUD3C8K2P to the USB-C port on the host computer. The computer screen may appear to flicker a few times before the GUD3C8K2P recognizes the connected devices.

Note

The GUD3C8K2P can still function without the external power adapter; however, the GUD3C8K2P would not provide power to charge the laptop
Please refer to monitor configuration table for resolution

Limited Warranty
Warranty Information This product carries a 1 Year Limited Warranty.
For the terms and conditions of this warranty, please go to https://www.iogear.com/supporUwarranty
Register online at https://www.iogear.com/register
Important Product Information
Product Model…………….
Serial Number…………….

Contact

WE’RE HERE TO HELP YOU! NEED ASSISTANCE SETTING UP THIS PRODUCT?
Make sure you:

Visit www.iogear.com for more product information
Visit www.iogear.com/support for live help and product support

IOGEAR
https://iogear.custhelp.com
support@iogear.com
www.iogear.com

Compliance Information

Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital service, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna
– Increase the separation between the equipment and receiver
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
– Consult the dealer or an experienced radio/TV technician for help
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.