chicco Fold&Go Child Car Seat Instructions

June 12, 2024
chicco

Child Car Seat
Instructions

Fold&Go Child Car Seat

chicco Fold&Go Child Car Seat - Figure1| chicco
Fold&Go Child Car Seat - Figure2
---|---
chicco Fold&Go Child Car Seat - Figure3| chicco
Fold&Go Child Car Seat - Figure4
chicco Fold&Go Child Car Seat - Figure5| chicco
Fold&Go Child Car Seat - Figure6

INSTRUCTIONS FOR USE

FOLD&GO I-SIZE (100-150 cm)
IMPORTANT: READ CAREFULLY THE ENTIRE INSTRUCTIONS BOOKLET BEFORE USE IN ORDER TO AVOID RISKS WHEN USING THE PRODUCT AND STORE IT FOR FUTURE REFERENCE. FOLLOW THESE INSTRUCTIONS CAREFULLY IN ORDER NOT TO COMPROMISE YOUR CHILD’S SAFETY. WARNING! BEFORE USE, REMOVE AND DISPOSE OF ALL PLASTIC BAGS AND PACKAGING MATERIALS AND KEEP THEM OUT OF REACH OF CHILDREN. IT IS RECOMMENDED TO DISPOSE OF THESE ITEMS AT A SEPARATE WASTE SORTING COLLECTION POINT, AS REQUIRED BY REGULATIONS IN FORCE.
WARNINGS

  • Each country has different safety laws and regulations for the transportation of children in cars. For this reason, contact local author-ties for further information.
  • Measures for adjusting the child car seat shall be implemented exclusively by an adult.
  • Do not let anyone use this product without having first read the instructions.
  • The risk of serious injuries to your child increases, not only in the case of accidents, but also in other circumstances (sudden braking, etc.) if these instructions are not followed carefully.
  • Keep this instruction booklet for future reference: there is a dedicated pocket behind the backrest of the seat for storing the instruction booklet.
  • The product is intended exclusively to be used as a Car Seat, therefore not for home use.
  • Artisanal declines any liability for the improper use of the product or any other use other than that specified in these instructions.
  • No car seat can guarantee your child’s total safety in case of accident, but using it reduces the risk of serious injuries.
  • Always transport a child using the child car seat, fitted correctly, including for short journeys; if you fail to do so, you may put their safety at risk. In particular, make sure that the seat belt is properly tensioned, free of knots and in proper position.
  • DO NOT use the product for more than 10 years. After this period, alterations of the materials (e.g., due to exposure to sunlight) may reduce or compromise the product’s effectiveness.
  • After an accident, even a minor one, or an accidental fall, the child car seat incurs damage, even if it is not visible to the naked eye. It must therefore be replaced.
  • Do not use second-hand child car seats: they may have suffered damages not visible to the naked eye, but such to compromise the product’s safety.
  • Do not use a damaged, deformed, excessively worn out car seat, or with any missing any parts: as its original safety features will have been be compromised.
  • This product must not be modified in any way unless the modification has been approved by the manufacturer.
  • Do not install accessories, spare parts or components which are not supplied and approved by the manufacturer on the car seat.
  • Do not use spacers, for example pillows, blankets, etc., to distance the child car seat from the car seat or to distance the child from the child car seat: in case of accident, the child car seat may not work properly.
  • Make sure that no objects are positioned between the child and the car seat (e.g., schoolbag, daypack), between the car seat and the vehicle’s seat or between the car seat and car door.
  • Make sure that the vehicle seats (foldable, tiltable or rotating) are well secured.
  • Do not transport loose, unsecured objects or baggage on the back shelf of the vehicle: they may injure the passengers in the case of an accident or sudden breaking.
  • Do not let children play with the child car seat components or parts.
  • Do not let other children play with the child car seat components or parts.
  • Never leave your child unattended in the car, it can be dangerous!
  • Do not transport more than one child at a time in the child car seat.
  • Ensure that all the car passengers fasten their vehicle seat belt for their own safety during the journey, they may injure the child in the event of an accident or sudden braking of the car.
  • WARNING! When adjusting the child car seat (the headrest and the backrest), make sure that the movable parts of the car seat do not come into contact with the child’s body.
  • If you need to carry out any adjustment on the child car seat or on your child when travelling, stop the vehicle in a safe place.
  • Check from time to time that your child does not release the buckle of the vehicle seat belt or has interfered with the car seat or parts of it.
  • Avoid giving food to your child while traveling, especially ollies, ice ollies or other foods on sticks. Your child may be injured in case of an accident or sudden braking.
  • Stop frequently during long trips: children tire easily whilst using the child car seat and need to move around. It is recommended that children get in and out of the child car seat from the curb side (only if accompanied by an adult).
  • Do not remove the labels and logos from the cover of the child seat, as this may damage the cover itself.
  • Avoid exposing the child car seat to the sun for extended periods of time: it may change the colour of the materials and fabric.
  • If the vehicle has been left in the sun, check that the different parts of the child car seat are not too hot: if necessary, let them cool off before accommodating your child to prevent burns.

1.2 PRODUCT FEATURES
This child car seat has been approved under regulation ECE R 129/03 for transport of children with height ranging from 100 to 150 cm.
IMPORTANT WARNING

  1. This is a i-Size booster seat Enhanced Child Restraint System. It is approved according to Regulation No. 129, for use primarily in “ i-Size seating positions” as indicated by vehicle manufacturers in the vehicle user’s manual. If in doubt, consult either the Enhanced Child Restraint System manufacturer or the retailer.
  2. Fold Go i-Size is installed in the direction of travel with Is fix anchorage in a vehicle equipped with Is fix anchorage points, in combination with the 3-point car seat belt, approved according to UN/ECE Regulation No. 16 or other.
  3. If the vehicle is not fitted with Is fix anchorage, the Fold Go i-Size can be installed in the direction of travel with a 3-point car seat belt, approved according to UN/ECE Regulation No. 16 or equivalent.
  4. Fold Go i-Size is approved for children from 100 to 150 cm in height, for use in the direction of travel.
  5. When used for children between 135 cm and 150 cm in height, Fold Go i-Size may not be suitable in all cars, especially in the case of cars with a low roof at the sides.

1.3 DESCRIPTION OF THE COMPONENTS
Figure A
A. Headrest
B. Diagonal belt guide
C. Backrest
D. Lateral wings
E. Seat
F. Abdominal belt guide
G. Belt Positioner
H. Safe Pad
I. Recline adjustment lever
J. Backrest blocking strip (for closing the child seat)
Figure B
K. Backrest width adjustment wheel
L. Backrest height adjustment lever
M. Backrest release lever
N. Back pocket for instruction manual
O. Carry handle
Figure C
P. Isofix connector eject button
Q. Isofix connector release button
R. Isofix connectors
S. Isofix connector indicators
T. Side Safety System
1.4 RESTRICTIONS AND REQUIREMENTS REGARDING THE USE OF THE PRODUCT AND VEHICLE SEAT
WARNING! Strictly comply with the following restrictions and requirements for use concerning the product and vehicle seat: If not followed your child’s safety will be compromised.

  • The height of the child must be between 100 and 150 cm.

  • The vehicle’s seat must be equipped with 3-point vehicle seat belt, whether static or with winder, approved according to UN/ECE Regulation no. 16 or other equivalent standards (Fig. 1-2).
    WARNING! When using in vehicles equipped with rear seat belts with integrated airbags (inflatable seat belts), follow the car manufacturer’s instruction manual.

  • It may happen that the vehicle seat belt buckle is too long and exceeds the expected height above the bottom of the car seat (Fig 3A-3B).In this case the seat must not be fixed on that seat but must be installed on another seat on which there is no problem. For more information, contact your car manufacturer.

  • The Car seat can be installed on the front seat, passenger side, or on any of the rear seats, and always positioned in the driving sense. Never use this child car seat on vehicle seats facing the sides or opposite to the direction of the drivers seat (Fig. 4). WARNING! According to accident statistics, a vehicle’s rear seat is generally safer than the front seat: we therefore suggest installing the car seat on the rear seat of the vehicle. In particular, the safer seat is the rear central one, if featuring a 3-point belt: in this case, we suggest positioning the Car seat on the rear central seat. If the Car seat is positioned on the front seat, for further safety, we suggest pushing the seat as far back as possible, depending on the presence of other passengers on the rear seat, and adjust the backrest in upright position. If the car features a belt height regulator, secure the latter in the lowest position. Then, make sure that the belt regulator is positioned far back (or aligned) compared to the backrest of the vehicle’s seat (Fig. 5A-5B). If the front seat is equipped with front airbag, is not advisable to install the Car seat on this seat. Always refer to your vehicle’s instruction manual when installing the child car seat on any seat protected by airbag.

INSTALLING THE CHILD CAR SEAT

2.1 INSTALLING THE CHILD CAR SEAT WITH THE VEHICLE SEAT BELT AND ISOFIX RIGID CONNECTORS
WARNING! The text and figures of these instructions are for the installation of the child car seat on the right back seat. When fitting the child car seat in other position these operations should in any case be carried out in the same order.
WARNING! Before installing the child car seat with Is fix connectors, make sure the child car seat is in vertical position, not reclined.
WARNING!

  • Check that the car seat headrest does not interfere with the headrest of the child car seat: it must not push it forward (Fig. 6). If this happens, remove the headrest from the car seat. Remember to reposition the headrest on the vehicle seat if the child car seat is removed and the seat is used by a passenger.
    1. Remove the Is fix connectors (R) by pressing and holding button (P) down (Fig. 7).
    2. Fasten the two rigid connectors (R) to the corresponding ISOFIX hooks on the car seat between the backrest and the seat (Fig. 8).
    WARNING! Make sure that the seat has been fitted correctly by checking that the two indicators (S) are green (Fig. 9).
    3. Push the child car seat firmly against the backrest of the car seat with the button pressed (p) to make sure that it adheres perfectly to the car seat (Fig. 10).
    WARNING! The back of the child car seat must closely adhere to the car seat.
    4. Place the child in the seat with their back leaning against the backrest. Check the height of the backrest (see section “7.1 ADJUSTING THE BACKREST HEIGHT”). Check the width of the backrest (see section “7.2 ADJUSTING THE WIDTH OF THE BACKREST”).
    5. Insert the diagonal portion of the car seat belt in the diagonal belt guide (B) (Fig. 11).
    6. Fasten the vehicle seat belt by passing the waist part through the seat Belt Positioner (G) (Fig. 12).
    7. Pull the diagonal part of the belt upwards so the entire belt is taut and fits closely over the child’s legs and chest (without being too tight) (Fig. 13).

WARNING! Check that the vehicle safety belt is tightened properly.
WARNING! Check that the vehicle safety belt is free of knots (Fig. 14).
WARNING! Check that the diagonal seat belt fits correctly across your child’s shoulders (Fig. 15) and does not press on the their neck; if necessary, adjust the height of the backrest (see section “7.1 ADJUSTING THE BACKREST HEIGHT”).
WARNING! Check that the car seat belt adjuster is reclined or at least aligned with the car seat backrest (Fig. 5A-5B).
WARNING! Never pass the vehicle seat belt in positions other than those indicated in this instruction booklet! (Fig. 16)
WARNING! When the child car seat is not in use, it should always be left secured with the Is fix connectors to the car seat or stowed in the boot. In fact, an unsecured Car seat may pose a hazard to the passengers in case of accident or sudden braking.
To remove the child from the child car seat, simply unfasten the buckle of the car safety belt, accompanying the belt during rolling.
2.2 INSTALLING THE CHILD CAR SEAT WITH THE VEHICLE SEAT BELT
WARNING! The text and figures of these instructions are for the installation of the child car seat on the correct back seat. When fitting the child car seat in other position these operations should in any case be carried out in the same order.
WARNING! The seat MUST ALWAYS be installed with the vehicle seat belt.
WARNING! Check that the car seat headrest does not interfere with the headrest of the child car seat: it must not push it forward (Fig. 6). If this happens, remove the headrest from the car seat. Remember to reposition the head- rest on the vehicle seat if the child car seat is removed and the seat is used by a passenger.

  1. Position the child car seat NOT reclined and with the connectors NOT pulled out against the backrest of the car seat (Fig. 17).
    WARNING! The back of the child car seat must closely adhere to the car seat.

  2. Place the child in the seat with their back leaning against the backrest. Check the height of the backrest (see section “7.1 ADJUSTING THE BACKREST HEIGHT”). Check the width of the backrest (see section “7. 2 ADJUSTING THE WIDTH OF THE BACKREST”).

  3. Insert the diagonal portion of the car seat belt in the diagonal belt guide (B) (Fig. 11).

  4. Fasten the vehicle seat belt by passing the waist part through the Belt Positioner (G) (Fig. 12).

  5. Pull the diagonal part of the belt upwards so the entire belt is taut and fits closely over the child’s legs and chest (without being too tight) (Fig. 13).

WARNING! Check that the vehicle safety belt is tightened properly.
WARNING! Check that the vehicle safety belt is free of knots (Fig. 14).
WARNING! Check that the diagonal seat belt fits correctly across your child’s shoulders (Fig. 15) and does not press on the their neck; if necessary, adjust the height of the backrest (see section “7.1 ADJUSTING THE BACKREST HEIGHT”).
WARNING! Check that the car seat belt adjuster is reclined or at least aligned with the car seat backrest (Fig. 5A-5B).
WARNING! Never pass the car safety belt in positions other than those indicated in this instruction booklet! (fig. 16).
WARNING! Make sure that your child is correctly secured in the child car seat, so that he does not slide forward.
WARNING! Check that the unused Isofix rigid connectors are not pulled out.
WARNING! When the child car seat is not in use, it should always be left secured with the 3-point belt to the car seat or stowed in the boot. In fact, an unsecured car seat may pose a hazard to the passengers in case of accident or sudden braking. To remove the child from the child car seat, simply unfasten the buckle of the car safety belt, accompanying the belt during rolling.

REMOVING THE CHILD CAR SEAT

WARNING! Remove the child from the child car seat before removing.

  1. Release the car seat belt.
  2. Remove the diagonal part of the belt from the guide, accompanying it during rolling.
  3. If the child car seat has also been fastened with the Is fix rigid connectors, it is necessary to release them from the appropriate hooks using the release button (Q).

WARNING! The release button (Q) may not be accessible, so you need to press and hold the Isofix (P) connector eject button and simultaneously pull the child car seat towards you until the Isofix connectors are fully pulled out.

  • Pull the two red buttons (Q) to release the connectors from the corresponding Isofix connections of the car seat (Fig.18), so that the indicator is totally red.
  • Push the rigid connectors into the base of the child car seat and completely retract them into the base, holding down one of the buttons (P) (Fig. 19).

FOLDING AND TRANSPORT OF THE SEAT

For easy transport of the child car seat, it is possible to compact it by folding the backrest over the seat. To carry out this step, it is necessary to check that the backrest is in the lowest position (see paragraph “7.1 ADJUSTING THE BACKREST HEIGHT”). At this point, use the backrest release lever (M) to fold the backrest into the seat (Fig. 20).
WARNING! With the backrest not fully lowered, the backrest release lever (M) may not be easily accessible. To keep the child car seat compact, remove the backrest blocking strip (J) from its seat and fasten it to one of the two special slots on the side of the backrest width adjustment wheel (K) (Fig. 21). To comfortably move the seat in this configuration, you can use the carrying handle (O) located on the back of the seat (Fig. 22 ).

INSTALLING AND REMOVING THE SIDE SAFETY SYSTEM

The Side Safety System (T) is a device that is installed on the door side for utmost protection in the case of a side impact. To install it, insert the hook “1” in the hole on the side flap (D) on the door side and press the central part until the other end “2” is also fastened to the structure (Fig. 23).

INSTALLING THE SAFE PAD

The Safe Pad (H) is a device that must ALWAYS be installed on the diagonal vehicle seat belt to ensure proper protection in the event of an impact. For correct installation, it is necessary to position the diagonal belt under the two Velcro straps of the Safe Pad (Fig. 24) and close it on itself making sure that the circular part is positioned between the chin and the chest of the child (Fig. 25).
WARNING! The Safe Pad must ALWAYS be used.

OTHER OPERATIONS

7.1 ADJUSTING THE BACKREST HEIGHT
It is possible to adjust the backrest height in 9 positions to the height of your child. Ensure that the child’s head is secured and that the car’s diagonal belt is correctly supported on the child’s shoulder. When adjusting the height of the backrest, check that the diagonal belt guide (B) is positioned above the shoulder at a maximum distance of 2 cm (Fig. 26).
To adjust:

  1. Press the backrest height adjustment lever (L) on the back of the headrest with one hand and raise/lower the backrest to adapt it to the height of the child’s shoulders (Fig. 27).
  2. Release the lever verifying that it has been engaged in the desired position.

7.2 ADJUSTING THE BACKREST WIDTH
It is possible to adjust the width of the backrest to better adapt the child car seat to the size ofyour child. To adjust, hold down the backrestheight adjustment lever (L) on the back of theheadrest with one hand and simultaneously operate the backrest width adjustment wheel (K) which can be seen above the headrest (fig. 28). After adjusting the width of the backrest, checkthat it is secured correctly in the desired position.
7.3 ADJUSTING THE BACKREST/SEAT ANGLE
You can recline the child car seat using the reclining adjustment lever (I). The child car seat allows reclining the backrest/seat in 4 positions to allow the child to travel as comfortably as possible. To carry out the adjustment operations more easily, it is recommended to remove the child from the seat; otherwise the operation will be more difficult. To return the car child seat to a vertical position, use the reclining adjustment lever (I) to push the seat towards the backrest of the car seat (Fig. 29). WARNING! After adjusting the reclining angle, check that the car safety belts are correctly tensioned and at most 2 cm above the child’s shoulder (Fig. 26).
7.4 REMOVING BACKREST/SEAT COVERS
The child car seat cover is fully removable so that it can be machine-washed. Lift the backrest (C) completely and widen the side flaps (D).
BACKREST

  1. Release the elastic loops from the respective hooks on the upper and lower sides of the side flaps (Fig. 30) and remove the fabric from the flaps.
  2. Continue by removing the central part of the backrest, removing the loops from the right and left pins (Fig. 31).
  3. Complete the removal of the fabric from the bottom upwards, removing the cover of the headrest paying attention to the elastic behind the backrest (Fig. 32).

SEAT

  1. Remove the cover from the seat by removing the plastic profiles from the right and left belt guides (Fig. 33).
  2. Release the plastic flaps from under the seat (Fig. 34).
  3. Pull the child car seat fabric out from the Belt Positioner (Fig. 35).

To cover the car seat, proceed in reverse order following the instructions above.
7.5 MAINTENANCE AND CLEANING THE FABRIC COVER
The cleaning and maintenance of the product must only be carried out by an adult.
HOW TO CLEAN THE FABRIC COVER
The child car seat’s fabric cover can be removed and washed. Please refer to the care label for instructions on washing the fabric:

| Machine washable at 30°C
---|---
| Do not bleach
| Do not tumble dry
| Do not iron
| Do not dry clean

  • Never use abrasive detergents or solvents.
  • Do not dry the fabric cover within a dryer, let it dry without squeezing it.

The fabric cover must only be replaced with another cover approved by the manufacturer, since it is an integral part of the child car seat and, therefore, one of its safety elements.
WARNING! To ensure the safety of the child car seat, never use it without its fabric cover.
CLEANING PLASTIC PARTS
Clean the plastic parts only with a soft cloth soaked in water or a neutral detergent. Never use abrasive detergents or solvents.
The moving parts of the child car seat must not be lubricated.
CHECKING THE CONDITION OF THE COMPONENTS
It is recommended to regularly check the condition of the following components to make sure they are not damaged or worn:

  • fabric cover: check that the padding does not come out from the seams. Check the condition of the seams: they must always be intact and undamaged.
  • plastic parts: check that the plastic parts are not worn out, damaged or faded.

WARNING! If the child car seat is damaged, deformed or excessively worn, it must be replaced, as its original safety features may have been compromised.
STORING THE PRODUCT
When it is not fitted in the car, it is recommended to store the child car seat in a dry place, away from sources of heat and to protect it from dust, humidity and direct sunlight.
DISPOSING OF THE PRODUCT
When the child car seat no longer complies with the original safety standards, stop using it and dispose of it at an appropriate collection point. Dispose of the child car seat always fol- lowing environmental rules and regulations adopted within the country of use. WARRANTY The product is guaranteed against any conformity defect in normal conditions of use as stated in the instructions. Therefore, the warranty does not apply in the case of damage caused by improper use, wear or accidental events. For the duration of the warranty on conformity defects please refer to the specific

ARTSANA UK Ltd.
2nd Floor
1 Imperial Place
Maxwell Road
Borehamwood
Hertfordshire – WD6 1JN
01623 750870 (office hours)
www.CHICCO.uk.com
ARTSANA S.p.A.
Via Saladin Catelli, 1
22070 Gradate (CO) – Italy
Tel. (+39) 031 382 111
Fax (+39) 031 382 400
www.CHICCO.comchicco Fold&Go Child Car Seat - qr
codehttps://CHC.GG/3OU93chicco Fold&Go Child Car Seat -
Figure8ARTSANA S.p.A.
Via Saldarini Catelli, 1
22070 Grandate (CO) – Italy
Tel. (+39) 031 382 111
Fax (+39) 031 382 400
www.chicco.com
46 079799 600 000_2005

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals