PRIOS 9934143 Jostiras LED Solar spotlight Instruction Manual

PRIOS 9934143 Jostiras LED Solar spotlight

Product Information

• Product Name: 1W LED Solar Lamp
• Model Number: 9934143
• Battery Type: 18650 Li-ion battery
• Battery Capacity: 1200mAh
• Battery Voltage: 3.7VDC
• Battery Energy: 4.44Wh
• Intended Use: Solar lamp for outdoor use
• IP Rating: IP54

Product Usage Instructions

1. Open the package and check the contents. Make sure you have received:
   • 1 Solar Lamp
   • Mounting hardware
2. Read the mounting instructions carefully.
3. Select a suitable location for the solar lamp outdoors.
4. Use the provided mounting hardware to securely install the solar lamp.
5. Ensure that the solar panel on the lamp is exposed to direct sunlight for maximum charging efficiency.
6. Turn on the solar lamp using the power switch or button, if available.
7. The solar lamp will automatically turn on at dusk and turn off at dawn.
8. If the solar lamp does not turn on or does not provide sufficient light, check the battery charge and ensure proper positioning of the solar panel.
9. For maintenance, clean the solar panel regularly to remove any dirt or debris that may obstruct sunlight.
10. If any issues persist or if you require further assistance, refer to the product manual or contact customer support.

Specification

• Model: 9934143
• 1W LED
• 3,7VDC 1200mAh 4,44Wh / 18650 Li-ion battery

Intended use

• Provided for use as solar lamp, outdoors

Safety Precautions

Package contents

• 1 Solar lamp
• Installation hardware
• Mounting instructions

INSTALLATION

Choose a place that can get enough sunshine to install the light, the more it gets sunshine, the longer it can illuminate.

Assemble the light fixture:

1. Separate the nut, the ground spike and hand screw bolt. (Figure A)
2. Put the nut into the hexagonal hole of the ground spike and press the nut by hand without letting go. As in Figure B, let the circular sawtooth of the two parts face each other.
3. Gently put the bolt through the hole of main lamp, then through the hole of ground spike and screw in the hexagonal nut, no need to tighten it too much. (Figure B)
4. Insert the whole spike into the ground vertically, and adjust the angle of the main lamp, tighten the bolt. (Figure C)

OPERATION GUIDE

• The solar landscape light can automatically detect surrounding brightness, it will not light up in the day, and it will automatically light up in darkness or at night.

• The default mode of the product is OFF. Press the back button to adjust modes when using the product.

• For Mono-Color Temperature Model (LED Color: 3000K)

• It has 2 modes, You can adjust to a desired mode by pressing the back button.

1. LOW Light Mode:
   • Press the button for once.
2. HIGH Light Mode:
   • On the basis of LOW Light Mode, press the button again

Daytime

• During the daytime or in a bright environment, if you want to test if it works, just cover the solar panel with your hand (or your body, a book, etc.) and turn on the switch.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>