Pyle PDA4BU Wireless Bluetooth Home Stereo Amplifier User Manual

Pyle PDA4BU Wireless Bluetooth Home Stereo Amplifier

WARNING!

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER OF THIS UNIT. THERE ARE NO USER-SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO A QUALIFIED TECHNICIAN.

• The lightning flash with the arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of “DANGEROUS” voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to humans. Users should exhibit extra safety when this symbol appears in this instruction manual and follow all precautions as they are stated.
• The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in this manual.

1. Read these instructions thoroughly before using this item.
2. Keep these instructions for future reference.
3. Heed all warnings.
4. Follow all instructions.
5. WARNING: To prevent fire or electric shock, do not expose this equipment to rain or moisture. Do not store or operate this product near any liquids.
6. Clean only with a dry cloth.
7. Do not store or operate this product near any heat sources such as radiators, heat registers, stoves, or other apparatuses (including amplifiers) that produce heat.
8. Do not defeat the safety purpose of the polarized or grounding-type plug. polarized plug has two blades with one wider than the other. A grounding plug has two blades and a round grounding prong. The wide blade or third prong is provided for your safety. If the provided plug does not fit your outlet, consult an electrician for the replacement of the obsolete outlet.
9. Protect all wires connected to this unit from being walked on or pinched, particularly plugs and the point where they exit from the unit. When removing the cord from the power outlet, remove it by holding the plug not by pulling the cord.
10. Unplug the unit during lightning storms or when unused for long periods of time.
11. When wiring this unit and all other equipment used in connection to this unit make sure that all of your equipment is turned OFF.
12. Once installation and wiring is complete power on all your equipment with the volume and level controls turned DOWN. Once all the equipment is ON slowly raise the volume or level controls to their proper positions.
13. When grounding this unit, be sure to do so correctly, so as not to defeat the built-in grounding in this unit.
14. Before placing, installing, rigging, or suspending any product, inspect all hardware, suspension, cabinets, transducers, brackets, and associated equipment for damage. Any missing, corroded, deformed, or non-load-rated component could significantly reduce the strength of the installation, placement, or array. Any such condition severely reduces the safety of the installation and should be immediately corrected. Use only hardware that is rated for the loading conditions of the installation and any possible short-term, unexpected overloading. Never exceed the rating of the hardware or equipment.
15. Consult a licensed, professional engineer regarding physical equipment installation. Ensure that all local, state, and national Regulations regarding the safety and operation of equipment are understood and adhered to.
16.  Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as a power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Introduction

To get the most from our PDA4BU, it is recommended that you review all of the information provided in the instruction manual before operating the equipment.

FRONT & BACK PANEL

1.  USB PORT/SD CARD SLOT: After inserting a USB flash drive/SD Card into the input terminal, be sure to set the input selector (16) to DIGITAL/LINE/MP3/BT, then press the mode button to choose between audio from the USB port, SD Card input, Line, Optical, Coaxial, Bluetooth or FM radio.
2. LED DISPLAY SCREEN: To display the input sources and track time information
3. CONTROL BUTTONS
   • MODE BUTTON: Press this button to select one of the play modes with USB/SD mode, FM mode and Bluetooth mode, Optical mode, or Coaxial Mode, automatically set in Bluetooth mode after turning on the unit.

STEPS FOR CONNECTING WITH WIRELESS BT DEVICE

1. Press the MODE button to choose Bluetooth mode, and display BLUE on the screen.
2. Search on the Bluetooth device name from another Bluetooth device and you can and the Bluetooth name – PDA4BU.
3. Select the PDA4BU Bluetooth name and wait for the device to pair.
4. The PDA4BU will emit a noise coming that the devices have successfully paired
5. Once paired you can play music from your Bluetooth device. You can also use the control buttons on the unit to select the tracks from your Bluetooth device.
6. REPEAT BUTTON: This button allows you to play the music in repeat mode (All or Single mode)

  * ALL – All tracks in the USB or SD CARD will be repeated in order without interruption.
  * SINGLE – Repeat the track that was currently playing.
2.  **PREV BUTTON:** Use this button to select each of the functions depending on these three different modes as below.
  * In USB/SD mode, use to select the previous track.
  * In FM/BT mode, use to select the previous channel.
  * In FM/BT mode, holding this button will decrease the volume.
3.  **NEXT BUTTON:** Use this button to select each of the functions depending on these three different modes as below.
  * In USB/SD mode, use it to select the next track or folder,
  * In FM/BT mode, use it to select the next channel.
  * In FM/ BT mode, holding this button will increase the volume.
4.  **PLAY/PAUSE BUTTON:** Each press of the PLAY/PAUSE BUTTON causes the operation to change from play to pause or from pause to play in the USB/SD mode or BT mode.
  * Press the PLAY/PAUSE BUTTON one time to auto-scan all frequencies  

NOTE: The USB input is ONLY meant to connect to a USB flash drive (thumb drive). Connecting an MP3 player or computer directly to the USB flash drive input will result in the unit failing to play the audio from those devices.

6. POWER SWITCH: Press this switch to power the unit on and off.
7. TALK OVER: TALK OVER for the MIC switch, press this switch to lower the music when using the microphone input.
8. HEADPHONE: main speakers will mute after inserting headphone, connector jack 3.5mm.
9. MICROPHONE VOLUME CONTROL KNOB: Turn this knob to adjust the volume of the microphone
10. MICROPHONE ECHO VOLUME CONTROL KNOB: Turn this knob to adjust the microphone echo volume level.
11. MICROPHONE BASS CONTROL KNOB: Turn this knob to adjust the low frequencies of the microphone.
12. MICROPHONE TREBLE CONTROL: Turn this knob to adjust the high frequencies of the microphone.
13. MICROPHONE INPUTS: KARAOKE or EXTERNAL MIC connects to these jacks.
14. MASTER VOLUME KNOB: Turn this knob to adjust the master volume.
15. BASS CONTROL KNOB: Turn this knob to adjust the low frequencies of music.
16. BASS CONTROL KNOB: Turn this knob to adjust the high frequencies of music.
17. BALANCE: Control the volume balance from left to right.
18. INPUT SELECTOR: Turn this switch to choose the favorable input source.
19. 3.5MM JACK: Connects to an MP3 player or Ipod with 3.5mm Jack.
20. REMOTE RECEIVER WINDOW: To receive the remote control signal.
21. PHONO AND CD INPUT SELECTOR: A selector that lets you choose the entry Type: CD or phono.
22. PHONO INPUT: Signal input, which allows the connection of audio sources with phono level, 2 x RCA connectors.
23. CD/DVD INPUT: Signal input: allows Connection of audio sources with Line Level, 2 x RCA connectors.
24. LINE OUTPUT: Stereo output, connect the RECORD input, 2 x RCA connectors.
25. BT ANTENNA: Please pull the antenna out when using BT input.
26. OPTICAL INPUT: Inputs optical digital signal, only support PCM format.
27. COAXIAL INPUT: Inputs coaxial digital signal, only support PCM format.
28. SPEAKER OUTPUT: Connect your speaker system to these terminals.
29. FM ANTENNA CONNECTOR: Connect for FM antenna.
30. POWER VOLTAGE SELECTOR: 115V/230V power supply input selector.
31. POWER SUPPLY CABLE: Connect to AC 115V/60Hz & 230V/50Hz outlet.

Remote Control

1. Press this button to turn on the MP3.
2. When in FM mode, press these two buttons to select the previous or next station.
3. Press these two buttons to select the previous or next track in USB or SD or BT mode.
4. Volume up or down
5. Press the numbers to select the tracks directly. The Unit takes 1-2 seconds to response
6. Press this button to select the different repeat modes.
7. Press this button to select the playing mode, such as USB/SD/FM/BT/LINE/OPTICAL/COAXIAL
8. EQ function
9. Play and pause function for MP3 and BT.

PDA4BU

Wireless BT Streaming Stereo Amplifier Receiver

Optical, Phono, Coaxial, FM Radio, USB & SD Memory Card Readers, Line (3.5 mm) Input, Digital LED Display, Microphone Inputs (200 Watt)

Features

• USB Flash Drive & SD Memory Card Readers
• FM Radio with LED Digital Display
• Aux (3.5mm) Input
• Desktop Audio Mini Power Amplifier
• Compact Home Theater Stereo Receiver Style
• Built-in BT for Wireless Music Streaming
• Phono inputs
• Optical/Coaxial Digital Signal Inputs
• Multi-Channel Audio Input Selection
• MP3/WAV Audio Files Support
• Connect & Stream Audio from External Devices
• (2) 1/4” Microphone Input Jacks
• (2) Pairs RCA (L/R) Audio Input Connectors
• (2) Pairs Banana Plug Speaker Output Connectors
• (1) Pair RCA (L/R) Audio Output Connectors
• (1) 1/4” Headphone Output Jacks
• Mic Talk over Ability to Speak Over Audio, Karaoke Style
• Front Panel Audio Control Center
• Radio Station Auto Search Scan
• Repeat Audio File Functions
• Treble, Bass, Master & Microphone Volume Adjustable

Wireless BT Streaming Connectivity

• Receives Wireless Signal for Audio Streaming
• Simple & Hassle-Free Pairing Setup
• Integrated Antenna for Extended Wireless Range
• Works with All of Today’s Latest Devices (Smartphones, Tablets, Laptops, Computers, etc.)
• Wireless BT Version: 4.2
• Wireless BT Network Name: ‘PDA4BU’
• Wireless Range: 40’+ Ft.

What’s in the Box:

• Desktop Stereo Amplifier
• Remote Control
• FM Antenna

 Technical Specs

• LED Screen Size: 3.3’’ x 1’’
• Remote Control Battery: 3V Lithium Cell (CR2025) Included
• MAX Power Output: 25 Watt (@ 4 Ohm)
• RMS Power Output: 20 Watt x 2 (@ 8 Ohm)
• Tone Control: Bass, f=100Hz +/-12dB, Treble, f=10 KHz +/-12dB
• Tone Control for Mic: Bass, f=100Hz +/-8dB, Treble, f=10 KHz +/-8dB
• Frequency Response: 20Hz-20 kHz
• Frequency Adjustment: +/-2dB
• Signal Noise Ratio: >71dB
• T.H.D.: <1%
• Radio Station Presets: Up to 60 Stations
• Separation Degree: >48dB
• Power Supply: 115V/230V, Switchable
• Dimensions (L x W x H): 10.2” x 9.8” x 2.8” -inches

Questions? Issues?

We are here to help!

• Phone: (1) 718-535-1800
• Email: support@pyleusa.com

This product can expose you to a chemical or group of chemicals, which may include ”Nickel Carbonate” which is known in the state of California to cause cancer, birth defects, or other reproductive harm. For more info, go to https://www.p65warnings.ca.gov/.

FREQUENTLY ASKED QUESTIONS

Can I control the PDA4BU using my smartphone?

Yes, you can control the PDA4BU using the Bluetooth connection from your smartphone, tablet, or other Bluetooth-enabled devices.

Does the PDA4BU support USB and SD card audio playback?

Yes, the PDA4BU has USB and SD card slots for playing audio files directly from compatible USB drives or SD cards.

Does the PDA4BU support multi-zone audio?

No, the PDA4BU is designed for a single audio zone and does not support multi- zone audio functionality.

Can I use the PDA4BU with active speakers?

Yes, the PDA4BU can be used with active speakers by connecting them to the amplifier's line-level outputs.

Does the PDA4BU have a built-in equalizer?

Yes, the PDA4BU features a built-in EQ with selectable presets for customizing the sound.

Does the PDA4BU support 220-240V voltage?

The PDA4BU is designed for 110-120V voltage and may require a voltage converter for use with a 220-240V power supply.

Can the PDA4BU be used for outdoor applications?

The PDA4BU is primarily designed for indoor use and may not be suitable for outdoor applications without proper protection from the elements.

Does the PDA4BU have a built-in microphone input?

No, the PDA4BU does not have a dedicated microphone input.

Can I connect a subwoofer to the PDA4BU?

The PDA4BU does not have a dedicated subwoofer output. However, you can connect a powered subwoofer using the line-level outputs or through an external crossover unit.

What is the power output of the Pyle PDA4BU amplifier?

The Pyle PDA4BU delivers a maximum power output of 100 watts (50 watts per channel).

Does the PDA4BU have built-in Bluetooth connectivity?

Yes, the PDA4BU features built-in Bluetooth, allowing you to wirelessly stream audio from Bluetooth-enabled devices.

Can I connect external devices to the PDA4BU?

Yes, the PDA4BU provides multiple input options, including RCA, AUX, USB, and SD card inputs, allowing you to connect various external audio sources.

Does the PDA4BU support FM radio?

Yes, the PDA4BU includes an FM radio tuner with auto-tuning and 50-station preset memory.

Does the PDA4BU come with a remote control?

Yes, the PDA4BU comes with a remote control for convenient operation from a distance.

Can I connect passive speakers to the PDA4BU?

Yes, the PDA4BU supports passive speakers through its speaker outputs.

VIDEO – PRODUCT OVERVIEW

DOWNLOAD THE PDF LINK:Pyle PDA4BU Wireless Bluetooth Home Stereo Amplifier User Manual

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>