JVC HA-A6T True Wireless Earbuds Instruction Manual
- June 12, 2024
- JVC
Table of Contents
JVC HA-A6T True Wireless Earbuds
Product Information
- Model: HA-A6T / HA-Z66T
- Manufacturer: JVC
- Address: 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN
- Web: https://www.jvc.com/
Product Usage Instructions
Charging the Battery
- Connect the charging case to a power source using the provided charging cable.
- Place the earbuds into the charging case and close the lid.
- The LED indicators on the charging case will show the charging status. When fully charged, the LED indicators will turn off.
Pairing the Earbuds
- Make sure the earbuds are charged and removed from the charging case.
- Enable Bluetooth on your device and search for available devices.
- Select “HA-A6T” or “HA-Z66T” from the list of available devices.
- Follow the on-screen instructions to complete the pairing process.
Using the Earbuds
- After pairing, you can use the earbuds to listen to music, make phone calls, and access the voice assistant.
- To control playback, use the buttons on the earbuds. Refer to the user manual for detailed button functions.
- To adjust the volume, use the volume controls on your device or the volume buttons on the earbuds if supported.
- When not in use, place the earbuds back into the charging case to prevent battery drain.
Recycling the Battery
The rechargeable battery used in this product is recyclable. To recycle the
battery, please call 1-800-8-BATTERY for information on proper disposal
methods.
Note: For detailed instructions and additional features, please refer to
the user manual provided with the product.
U.S.A.
Supplier’s Declaration of Conformity
- Model Number : HA-A6T
- Trade Name: JVC
- Responsible party: JVCKENWOOD USA Corporation
- Address: 1440 Corporate Drive, Irving, TX 75038
- Telephone Number: 678-449-8879
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party
responsible for compliance
could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
Dear Customer,
- This apparatus is in conformance with the valid United Kingdom Regulations and standards regarding
- Radio and RoHS. United Kingdom representative of JVCKENWOOD Corporation is: JVCKENWOOD U.K. Limited, First Floor, Gleneagles, the Belfry, Colonial Way, Watford, Hertfordshire WD24 4WH, UNITED KINGDOM
Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems)
Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed of as household waste. This product contains a rechargeable battery. Contact JVCKENWOOD’s authorized dealer for disposal.
Declaration of conformities
- Hereby, JVCKENWOOD declares that the radio equipment [HA-A6T / HA-Z66T] is in compliance with Directive 2014/53/EU.
- The full text of the EU Declaration of Conformity is available at the following internet address: ( https://www.jvc.net/euukdoc/).
WARNING
- Do not listen at high volume for an extended period. Do not use it while driving or cycling.
- Pay special attention to the traffic around you when using the headphones outside.
- Failure to do so could result in an accident.
- This product with a built-in battery shall not be exposed to excessive heat such as sunshine, fire, or the like.
- This product contains a rechargeable battery, which is not replaceable.
- The danger of explosion if the user replaced the battery. Do not replace the battery user’s own self.
Warnings for battery
- Please do not handle the battery in the following manners.
- It can lead to an explosion or leakage of flammable liquids and gases.
- Dispose of in fire, discard, crush, or cut
- Leave in an extremely high-temperature environment
- Leave in an extremely low-pressure environment
- To prevent possible hearing damage, do not lister at high volume levels for long periods.
BLUETOOTH SPECIFICATION
- Frequency range: 2.402 GHz – 2.480 GHz
- Output power. +4.5 dBm (MAX), Power Class 1
- Hearing Comfort and Well-Being
- Do not play your personal audio at high volume. Hearing experts advise against continuous extended play.
- If you experience a ringing in your ears, reduce volume or discontinue use.
Traffic Safety
- Do not use while operating a motorized vehicle. It may create a traffic hazard and is illegal in many areas.
- You should use extreme caution or temporarily discontinue use in potentially hazardous situations.
- Do not turn up the volume so high that you cannot hear sound around you.
Charing
- Remove
- Ensure the indicators light up.
Connection
Function
Ensure the “JVC” logo is on the upper side, and fit it to your ear by adjusting the position.
After using, set firmly for charging.
Charging Terminals
When the charging terminals are dirty or dusty, it may affect the charging performance. Gently wipe the charging terminals regularly with a cotton swab.
https://manual3.jvckenwood.com/accessory/headphones/global/
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVCKENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>