VANITY ART SJS10308ORB Light Lantern Geometric Chandelier Instruction Manual
- June 12, 2024
- VANITY ART
Table of Contents
VANITY ART SJS10308ORB Light Lantern Geometric Chandelier
FIXTURE ASSEMBLY STEPS:
DESCRIPTION
WARNING – if any Special Control Devices are used with this
Fixture.Follow the instructions Carefully to assure fun compliance With N.E.C.
requirements. if there are any questions, contact a Qualified Electrical
Contractor.
CAUTION – All glass is fragile.use care when handling Glass component(s)
and or Lamp(s).
WARNING – This product contains chemicals known to the State of
California to cause cancer, birth defects and /or other reproductive harm.
Thoroughly wash hands after installing. handling. cleaning.or otherwise
touching this product
CANOPY MOUNTING & WIRE CONNECTION ASSEMBLY STEPS:
- AC110~120V,50~60Hz.The Max lamps power is 60W TYPE B Bulb.
- Avoid to scratch the surface of lighting and the wires when install it.
- Printed on the wire : SPT-1/20288 or SPT-2 and other parameters of the line for the positive pole (Connect ”L”), The wire without mark is the negative pole (Connect ”N”), Ground cables are connected to ground cables (Connect ” )”) , (L- L, N-N. )- )).
- Don’t install it to the ceiling before it’s completely dry, thesurrounding around must be ventilated and dry.
- Keep away from the acid, basicity objects and gases, clean withsoft cloth, water washing is not allowed.
- Be careful when you install glass lamp shade
- The lighting must be installed by professional electrician and used indoor only.
- Please keep attention to cut off the power supply when installing, cleaning, and replacing bulb.
ITEM NO.: SJS103080RB
110-120V / 60Hz
E 12 4+4 *MAX 60W TYPE B
(Do not contain light bulb)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>