VANITY ART Art SJF30510BD 10 Light Candle Style Geometric Chandelier Instruction Manual
- June 4, 2024
- VANITY ART
Table of Contents
VANITY ART Art SJF30510BD 10 Light Candle Style Geometric Chandelier
FIXTURE ASSEMBLY STEPS
DESCRIPTION
WARNING – if any Special Control Devlces are used with this Fixture, Follow the instructions Carefully to assure fun compliance With N.E.C. requirements. if there are any questions, contact a Qualified Electrical Contractor.
CAUTION- All glass IS fragile,use care when handling Glass component(s) and or Lamp(s).
WARNING- This product contains chemicals known to the State of Califomia to cause cancer, birth defects and lor other reproductive harm. Thoroughly wash hands after installing. handling. cleaning.or otherwise touching this product
CANOPY MOUNTING & WIRE CONNECTION ASSEMBLY STEPS
Attach(N), (P) to achieve overall desired length.
FIXTURE ASSEMBLY STEPS
ITEM NO.: SJF30510BD
110-120V/ 60Hz E12 10 MAX 60W TYPE B (Do not contain light bulb)
- AC110-120V,50-60Hz.The Max lamps power is 60W TYPE B Bulb.
- Avoid to scratch the surface of lighting and the wires when install it.
- Printed on the wire : SPT-1/20288 or SPT-2 and other parameters of the line for the positive pole (Connect “L”), The wire without mark is the negative pole (Connect”N”), Ground cables are connected to ground cables (Connect “ “). (L- L,N-N. – )
- Don’t install it to the ceiling before it’s completely dry, thesurrounding around must be ventilated and dry.
- Keep away from the acid, basicity objects and gases, clean withsoft cloth, water washing is not allowed.
- Be careful when you install glass lamp shade
- The lighting must be installed by professional electrician and used indoor only.
- Please keep attention to cut off the power supply when installing, cleaning, and replacing bulb.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>