UPLIFT DESK ACC086 MoPac Cushion Instruction Manual
- June 12, 2024
- UPLIFT DESK
Table of Contents
UPLIFT DESK ACC086 MoPac Cushion
MoPac Cushion
| SKU | ACC086 |
|---|---|
| Package Contents | MoPac Cushion (qty 1) |
Assembly Instructions
- The MoPac Cushion comes with an anti-slip surface on the underside of the cushion to keep it from sliding when seated.
- Place the MoPac Cushion on top of one of your MoPac Cabinets to give visitors a place to sit.
- The MoPac Cushion can be used on the MoPac Cabinets with or without a MoPac Base installed. Seated heights of the MoPac Cabinets with and without the MoPac Base are shown below.
| Cushion Height | With Base | Without Base |
|---|---|---|
| 24″ | 24″ | 20″ |
A Note About Fabric Care
Normal:
Vacuum your fabric seat as needed. Vacuuming picks up dust and reduces the
need for professional cleaning.
Ink Stains :
Apply a small amount of isopropyl alcohol to a clean and damp absorbent cloth.
Start at the outside of the ink stain and work toward the center. Apply
pressure, but do not rub too vigorously. As you work and your cloth soaks up
the ink from the fabric stain, it’s important to use a clean section of the
cloth or the stain will spread. Apply more iso-propyl alcohol to the cloth as
needed. If the ink stain persists, try using acetone. Note: This procedure is
not intended for day-to-day cleaning.
Spot Cleaning:
Immediately soak up the stain with a soft, absorbent cloth. Do not dry the
stain completely, as this may set it in the fabric permanently. The longer a
stain is allowed to remain on the fabric, the more difficult it is to remove.
Oil-based Stains:
Use a dry cleaning solution applied with a damp clean cloth or sponge. Test
the cleaning solution on a small, concealed spot on the fabric first before
attempting on a larger area. If there is no spotting, ringing, or damage to
the fabric or its dyes, apply the cleaning solution to the soiled area with
light, quick strokes. Begin at the outside of the stain and work toward the
middle, making sure you use a clean part of the cloth as you work.
Water-based Stains:
Use a water-based fabric cleaner (specifically made for cleaning fabric) or a
solution of mild, alkaline, warm soapy water. Make sure that the soap and
water mixture is not overly soapy. Test on a small, concealed section of the
fabric first before applying to the main area. Work the cleaner or soap/water
mixture into the stain on the fabric, starting from the outside of the fabric
and working your way to the middle.
© UPLIFT Desk • 800-349-3839 • 512-614-3152 • info@upliftdesk.com • upliftdesk.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>