HOME DECORATORS COLLECTION GBBA020 Berkel Acrylic Freestanding Flatbottom Bathtub Installation Guide

HOME DECORATORS COLLECTION GBBA020 Berkel Acrylic Freestanding Flatbottom

Bathtub

Product Information

• Product Name: GBBA020
• Manufacturer: BERKEL
• Product Video: http://youtu.be/EmpHvs4Y-ko
• Product Website: HOMEDEPOT.COM/HOMEDECORATORS
• Dimensions (inches): 10 1/2 [267] (height), 29 [737] (width), 24 1/2 [623] (depth)
• Weight: 63.9 lbs (29 kg)
• Capacity: 42.3 gallons (0.16 m3)
• Part Numbers: OVE FLEX-H2 (flexible pipe), OVE FLEX-P (flexible P-trap)
• Tools Required: Level, Drill, Silicone

Product Usage Instructions

Floor Tracing

1. Use the floor tracing template supplied in this manual to trace the proper position of your supply pipes, drain, and P-Trap rough-in. OR
2. Place the bathtub in the desired position on the floor, manually locate the proper position for your plumbing, and trace the outline on the floor.
3. Place the tub in the desired position and level it using the adjustable feet.
4. Remove the bathtub and put it on a throw rug to prevent damages.

Faucet Installation on the Bathtub (Optional) Notes: Verify all pipe connections to ensure no leakage occurs.

• Zone for Deck Mounted Faucet: 19 11/16 [500] (width), 4 3/4 [120] (depth), 4 3/4 [120] (height)

Installation Option #1: Using OVE FLEX-H2

1. Install the OVE FLEX-H2 flexible pipe by screwing it to the preinstalled bathtub drain outlet. Use Teflon tape and/or thread sealant.
2. Connect the flexible pipe to your existing floor drain as illustrated, using PVC pipe sealant to join the parts together.

Installation Option #2: Using the OVE FLEX-P

1.  Install the OVE FLEX-P flexible P-Trap by screwing it to the preinstalled bathtub drain outlet. Use Teflon tape and/or thread sealant. Then, as shown in the illustration, connect the P-Trap tothe Flexible Tube.
2. Connect the Flexible Tube to your existing floor drain as illustrated, using PVC pipe sealant to join the parts together.
3. Note: The OVE FLEX-P consisting of the P-Trap and Flexible Tube parts are not supplied. It is available for purchase upon request. Call our customer service.

SPECIFICATION

FLOOR TRACING TEMPLATE

• Rough-in zone for water supply pipes
• Floor cut-out for P-trap
• Rough-in zone for waste pipe

Measures: inch [millimeter]

PART LIST

1

|
| OVE FLEX-P flexible P-trap (NOT SUPPLIED)|

—

| ****

Available upon request. Call our customer service.

|

1-1/2 NPSM to SCH40 Pipe Adapter Raccord

| ****

1

|

TOOLS REQUIRED

CAUTION

You will need at least two people to install this product properly.
In order to reduce the risks of personal injuries, do not support or lift the bathtub by the rim. Provide adequate support under the feet.
The distributor is not responsible for any damage to the unit or personal property caused by improper installation. If you disregard instructional warnings, you will void your warranty and possibly deal with water damage.

• Unpack and inspect the bathtub for damage. Return the bathtub to the carton until you are ready to install.
• Install the bathtub on an adequately supported, level floor.
• Before installation, ensure proper access to the final plumbing connections.

FLOOR TRACING TEMPLATE

IMPORTANT

• Drawings are for reference ONLY. This guide illustrates installation best practices.
• Carefully read the instructions before starting the installation.
• This bathtub should be installed by an experienced plumber.
• Make sure the floor drain is already installed and is compliant with your local regulations.
• Piping and drain trap are not supplied.

FLOOR TRACING

1. Use the floor tracing template supplied in this manual to trace the proper position of your supply pipes, your drain and your P-Trap rough-in.
   OR

2. Place the bathtub in the desired position on the floor, manually locate the proper position for your plumbing and trace the outline on the floor.

3. Place the tub in the desired position and level it using the adjustable feet.

4. Remove the bathtub and put it on a throw rug to prevent damages.

FAUCET INSTALLATION ON THE BATHTUB (OPTIONAL)

1. Locate where you will drill the holes into the acrylic, and stick masking tape onto that area. This will prevent the acrylic from chipping.
2. Drill holes for the faucets on the bathtub at the desired location.
3. Unscrew the bolts at the bottom of the bathtub using an adjustable key. Then carefully take out the top of the tub and place it on a throw rug or other protective floor covering to prevent damage to the bath and the floor.
4. Install the faucets according to the faucets’ manufacturer instructions.Then assemble the top of the bathtub with the skirt, and secure the bolts at the bottom as shown in the illustration.
5. Connect the faucet supply lines with hot and cold water supply and check for leaks.
   Notes: Verify all pipe connections to ensure no leakage occurs.

INSTALLATION OPTION

USING OVE FLEX-H2

1. Install the OVE FLEX-H2 felxible pipe by screwing it to the preinstalled bathtub drain outlet. Use teflon tape and/or thread sealant.
2. Connect the flexible pipe to your existing floor drain as illustrated, using PVC pipe sealant to join the parts together.

USING THE OVE FLEX-P

1. Install the OVE LEX-P flexible P-Trap by screwing it to the preinstalled bathtub drain outlet. Use teflon tape and/or thread sealant. Then, as shown in the illustration, connect the P-Trap to the Flexible Tube.
2. Connect the Flexible Tube to your existing floor drain as illustrated, using PVC pipe sealant to join the parts together.
   Note: The OVE FLEX-P consisting of the P-Trap and Flexible Tube parts are not supplied. It is available for purchase upon request. Call our customer service.

HELPFUL HINT!
The OVE FLEX-P flexible P-trap is available upon request. Call our customer service.

USING REGULAR PVC PIPING

1. Apply Teflon Tape and/or thread sealant to the pre-installed bathtub drain.

2. Screw the provided 1-1/2 NPSM to SCH40 Pipe Adapter to the drain. Cut a 1-1/2 PVC Extension Tube to the desired length. Then connect it to the Adapter using PVC pipe sealant to join the parts together.
   OR

3. Use any custom fittings to connect the bathtub drain to the existing waste pipe. Be sure to follow local codes and best plumbing practices.

4. Connect the PVC tubing to the existing waste drain pipe on the floor using PVC pipe sealant to join the parts together.

SEALING

BEFORE FIXING YOUR TUB TO THE FLOOR, ENSURE THAT YOU HAVE INSTALLED YOUR FAUCET (if applicable) AND THAT YOU HAVE CHECKED FOR LEAKS.

1. Test for leak by filling up the tub and let it drain. Then check all plumbing connections for leaks.
2. Fix the bathtub to the floor by applying a strong Tub & Tile Adhesive under each edges of the tub that will be in contact with the floor: The rim, the lateral bars and the feet.
3. Finally, for a professional finish, draw a bead of silicone around the base.
4. Let dry 24h.

Questions, problems, missing parts?
Before returning to store, call Home Decorators Collection customer service.
1-800-986-3460, 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday

HOMEDEPOT.COM/HOMEDECORATORS

References

• Home Decorators Collection - Home Decor - The Home Depot

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>