audio-technica AT-SB2022 Wireless Stereo Disc Player System User Guide
- June 12, 2024
- Audio-Technica
Table of Contents
audio-technica AT-SB2022 Wireless Stereo Disc Player System User Guide
audio-technica AT-SB2022 Wireless Stereo Disc Player System
-
Remove the tonearm fixing screw. Store the screw as it is used during transport, etc.
-
Charge the product. Use the included USB charging cable. Use a commercially available USB power adapter (recommended voltage: 5 V).
-
Slide the open button forward and open the cover. Pull out the tonearm until a click is heard. Remove the 45 RPM adapter.
-
Place a record on the platter. For LP records, place the 45 RPM adapter on top of the record.
For 45 RPM records, place the 45 RPM adapter under the record. -
Press the power supply button after closing the cover. Press the platter speed button to select the proper speed for the record.
-
Press and hold the wireless function button (for about 2 seconds) to switch to pairing mode. Once in pairing mode, the power supply indicator lamp flashes quickly in white.
-
Turn on the power supply of wireless headphones or speakers,etc., and put them in pairing mode.
Once pairing is complete, the product’s power supply indicator lamp switches to flashing slowly in white.
