in-lite ACE 12v LED Low Voltage Outdoor Post Lights Instruction Manual
- June 12, 2024
- in-lite
Table of Contents
in-lite ACE 12v LED Low Voltage Outdoor Post Lights
Product Information
The product is called ACE and it is a 12V lighting system. It comes with the following components:
- 1x ACE unit
- 1x 12V transformer
- 1x 12V in-lite cable
- 2x o14mm stones or gravel
- 1x o6mm stone or wood
Product Usage Instructions
-
Choose the installation option based on your preference:
- Option 1: Soil/Gravel
- Option 2: Stone/Wood
-
If you have chosen Option 1 (Soil/Gravel), proceed to step 14.
If you have chosen Option 2 (Stone/Wood), continue with the next step. -
Place the o14mm stones or gravel in the desired location.
-
Add the o6mm stone or wood on top of the o14mm stones or gravel.
-
Connect the in-lite 12V cable to the ACE unit.
-
Position the ACE unit in the desired location.
-
If using soil/gravel, make sure the ACE unit is placed securely and levelled.
-
Follow the instructions to connect the cable properly.
-
Turn on the transformer.
-
Make sure the ACE unit is receiving power.
-
If necessary, adjust the positioning of the ACE unit to achieve the desired lighting effect.
-
Ensure all connections are properly secured.
-
Turn on the ACE unit.
-
Enjoy your ACE lighting system!
PARTS
INSTALLATION
- Read through the manual for the transformer and cable before installing this fixture
- This product may only be used within the in-lite system. If components are used in the system that do not originate from in-lite, the warranty no longer applies
- Install the in-lite system components (fixtures, transformers, mini-connectors, Easy-Locks and cable connectors) so that they can easily be replaced
- Never use the in-lite low-voltage cable in combination with 100-240V. This is only suitable for use with the components of the in-lite 12 volt low-voltage system.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>