THON 2U Studio Desktop Instruction Manual

THON 2U Studio Desktop

Product Information:

The Thon Studio Desktop 2U, 3U, 4U, 5U, 6U, 7U, 8U Studio Rack is a versatile rack system designed for studio use. It comes with various sizes ranging from 2U to 8U, allowing you to choose the appropriate size for your equipment. The rack is made of durable
materials and features sturdy construction to securely hold your audio equipment.

Safety Instructions:

• Ensure that plastic bags, packaging, and small parts are properly disposed of and kept out of reach of children to avoid choking hazards.
• Be cautious of sharp edges on tools, screws, and components to prevent injury to hands when assembling and screwing the individual parts.
• Never let children play unattended with the product.

Scope of Delivery:

The Thon Studio Desktop 2U, 3U, 4U, 5U, 6U, 7U, 8U Studio Rack comes with all the necessary components for assembly.

Installation Instructions:

1. Place all components on a suitable mounting surface and use soft padding to prevent damage to the surfaces.
2. Refer to the provided figure for an overview of the positioning of the individual components.
3. Insert the connecting bolts into the drill holes. The bolts will sit loosely until the connector housings on the associated component are tightened.
4. Position all connector housings so that the connecting bolts can be completely sunk into the holes and the arrow position of the connector housings points towards the hole.
5. First, place the floor and cover panel on the respective connecting bolts of a side panel and tighten the connector housings of the floor and cover panel clockwise to lock the connection with the connecting bolts.
6. Place the second side panel on the pre-assembled unit consisting of the side panel, floor, and cover panel. Tighten the connector housings of the floor and cover panels clockwise to lock the connection with the inserted bolts.
7. Check all connections for a tight fit.

Mounting Instructions:

1. To mount the felt slides, rotate the assembled rack with the floor panel facing up. Screw the four felt slides with the supplied countersunk screws in the markings provided.
2. To mount the rack rails, screw them on the inside in parallel to the front edge of the rack using the supplied wood screws. It is recommended to maintain a distance of approximately 1 cm from the front edge. The installation depth can range from 0 to 55 mm.

Technical Specifications:

The technical specifications for the Thon Studio Desktop 2U, 3U, 4U, 5U, 6U, 7U, 8U Studio Rack are not provided in the user manual extract.

Safety instructions

DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are properly disposed of and are not in the reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from the product. They could swallow the pieces and choke!
Never let children play unattended with the product.

CAUTION!
Risk of injury to the hands
When assembling and screwing the individual parts, pay attention to sharp edges on tools, screws and components.

Scope of delivery

Before you assemble your rack, make sure the content of package is complete according to the following list.

• 2 × side panel, 19 mm melamine-coated furniture board
• 1 × floor plate, 19 mm melamine-coated furniture panel
• 1 × cover plate, 19 mm melamine-coated furniture panel
• 8 × connector housing
• 8 × connector bolts
• countersunk screws
• wood screws
• 2 × rack rails, stepless, equipped with nuts and rubber piping
• 4 × felt slides
• 1 × Allen key
• 1 × assembly instructions

Installation

Place all components on a suitable mounting surface for mounting. Use a soft padding to prevent damage to the surfaces.

Overview
The following figure shows an overview of the positioning of the individual components.

1. Side panel
2. Floor panel, cover panel
3. Rack rail

Preparing the components
Insert the connector housing and the connecting bolts into the holes provided in the floor panel (4 × connector housing), the cover panel (4 × connector housing) and in the side panels (4 × connecting bolts each).

After insertion, the connecting bolts sit loosely in the drill holes and only spread apart when the connector housings on the associated component are tightened.

1. Side panel
2. Floor panel, cover panel
   A Connector bolt
   B Connector housing

Mounting side, floor and cover panels

1. Side panel
2. Floor panel, cover panel
3. Position all connector housings so that the respective connecting bolts can be completely sunk into the holes and the arrow position of the connector housings points towards the hole.
4. First place the floor and cover panel on the respective connecting bolts of a side panel and tighten the connector housings of the floor and cover panel clockwise to lock the connection with the connecting bolts used.
5. Place the second side panel on the pre-assembled unit consisting of the side panel, floor and cover panel. Tighten the con‐nector housings of the floor and cover panels clockwise to lock the connection with the inserted bolts.
6. Check all connections for tight fit.

Mounting the felt slides

C Felt slides
D Countersunk screw

1. Rotate the assembled rack with the floor panel facing up.
2. Screw the four felt slides with the supplied countersunk screws in the markings provided.

Mounting rack rails
Screw the rack rails with the help of the supplied wood screws on the inside in parallel to the front edge in the rack. We recommend a distance of approx. 1 cm from the front edge.

Installation depth: 0 … 55 mm.

3 Rack rail

E Wood screw

Technical specifications

Thon Studio Desktop 2U

Thon Studio Desktop 3U

|
Thon Studio Desktop 3U BK, graphite| Item number 503459
Thon Studio Desktop 3U WH, white| Item number 503456
Thon Studio Desktop 3U oak| Item number 509421
Thon Studio Desktop 3U maple| Item number 524316
Thon Studio Desktop 3U beech| Item number 524315
Rack units| 3
Installation depth| max. 315 mm
Dimensions (W × H × D)| 540 mm × 189 mm × 320 mm
Weight| Approx. 5.6 kg

Thon Studio Desktop 4U

|
Thon Studio Desktop 4U BK, graphite| Item number 503463
Thon Studio Desktop 4U WH, white| Item number 503461
Thon Studio Desktop 4U oak| Item number 509424
Thon Studio Desktop 4U maple| Item number 524322
Thon Studio Desktop 4U beech| Item number 524321
Rack units| 4
Installation depth| max. 315 mm
Dimensions (W × H × D)| 540 mm × 234 mm × 320 mm
Weight| Approx. 6.2 kg

Thon Studio Desktop 5U

Thon Studio Desktop 6U

|
Thon Studio Desktop 6U BK, graphite| Item number 503474
Thon Studio Desktop 6U WH, white| Item number 503473
Thon Studio Desktop 6U oak| Item number 509428
Thon Studio Desktop 6U maple| Item number 524404
Thon Studio Desktop 6U beech| Item number 524492
Rack units| 6
Installation depth| max. 315 mm
Dimensions (W × H × D)| 540 mm × 324 mm × 320 mm
Weight| Approx. 6.9 kg

Thon Studio Desktop 7U

|
Thon Studio Desktop 7U BK, graphite| Item number 503478
Thon Studio Desktop 7U WH, white| Item number 503477
Thon Studio Desktop 7U oak| Item number 509429
Thon Studio Desktop 7U maple| Item number 524407
Thon Studio Desktop 7U beech| Item number 524406
Rack units| 7
Installation depth| max. 315 mm
Dimensions (W × H × D)| 540 mm × 369 mm × 320 mm
Weight| Approx. 7.5 kg

Thon Studio Desktop 8U

Protecting the environment

Disposal of the packaging material

For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling.
Ensure that plastic bags, packaging, etc. are properly disposed of.
Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.

References

• Buy musical instruments online from the market leader – Thomann United States

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>