THON 462836 DJ Table Z-Style User Manual
- June 9, 2024
- THON
Table of Contents
THON 462836 DJ Table Z-Style User Manual
Safety instructions
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are properly disposed of and are not
in the reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from the product. They could swallow the pieces and choke!
Never let children play unattended with the product.
CAUTION!
Risk of injury due to heavy weight
Due to the heavy weight of the studio desk, at least two persons are required
for transport and assembly
CAUTION!
Risk of injury to the hands
When assembling and screwing the individual parts, pay attention to sharp
edges on tools, screws and components.
NOTICE!
Possible staining
The plasticizer contained in the rubber feet of this product may possibly
react with the coating of your surface and after some time cause permanent
dark stains.
In case of doubt, do not put the rubber feet directly on the surface and use a suitable underlay if necessary, i.e. felt-pad floor protectors or similar.
Scope of delivery
- Thon DJ Table Z-style with the following components:
- 8 × spring-loaded butterfly lock
- 4 × folding handle
- 8 × flat steel corner
- 6 × rubber foot
- 2 × recessed edge castor on the case
- 4 × height-adjustable foot with knurled plate
- 2 × star knob screw
- 1 × lashing strap
- 1 × strap knob
- Foam paddings
- 1 × assembly instruction
Installation
To assemble the case, place it on a suitable mounting surface with the edge castors facing up. Use a soft padding to prevent dam‐ ages to the surfaces.
Open the butterfly locks and put the case lid with the edge castors next to
the case bottom with the Z-shaped side panels.
Open the lashing strap that secures the Z-panels in the bottom of the case.
Set up the upper Z-panel and close the lateral butterfly locks so that the
Z-panel is fixed.
Then set up the lower Z-panel and close the lateral butterfly locks so that the Z-panel is fixed.
Mount the case lid for stabilizing the DJ Table!
Lay the case on the mounting surface as shown.
Lay the case lid flush with the butterfly locks on the Z-panels as shown and
close the butterfly locks so that the case lid is fixed.
Set up the fully assembled unit. Open the bungee loop of the tray on the
inside of the case lid and carefully lay the tray onto the Z-panel brackets.
Secure the tray to the Z-panels with the two factory-installed star knob
screws.
Technical specifications
Working height tabletop | approx. 900 mm |
---|---|
Material | 7 mm birch multiplex |
30 mm × 30 mm aluminium profiles
Colour| Black
Item no| 462836
Dimensions case (W × H × D)| 1224 mm × 604 mm × 275 mm
Weight| 24.1 kg
Protecting the environment
Disposal of the packaging material
For the transport and protective packaging, environmentally friendly materials
have been chosen that can be supplied to normal recycling.
Ensure that plastic bags, packaging, etc. are properly disposed of.
Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de
Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany
Telephone: +49 (0) 9546 9223-0
Internet: www.thomann.de
07.04.2022, ID: 462836
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>