Kappesberg M626 Paneleiro Botanic Instruction Manual
- June 12, 2024
- Kappesberg
Table of Contents
Kappesberg M626 Paneleiro Botanic
Tools Needed
The assembly must be done by ONE people
Tools needed to assemble the furniture.
Assemble the furniture on a clean and fiat surface
Dimension
Product Descriptions
List of pieces
Code| Description| Amount| Length
(mm)
| Length
(in.)
| Width
(mm)
| Width
(in.)
| Thickness
(mm)
| Thickness
(in.)
| Box
01| Right side| 1| 2040| 80.31″| 496| 19.53″| 15| .59″| A
02| Left side| 1| 2040| 80.31″| 496| 19.53″| 15| .59″| A
03| Bottom/Base| 1| 470| 18.50″| 496| 19.53″| 15| .59″| B
04| Top| 1| 470| 18.50″| 496| 19.53″| 15| .59″| B
05| Top| 1| 501| 19.72″| 514| 20.24″| 15| .59″| B
06| Shelf| 4| 470| 18.50″| 430| 16.93″| 15| .59″| B
07| Side Skirting| 2| 420| 16.54″| 160| 6.30″| 15| .59″| B
08| Baseboard| 2| 499| 19.65″| 160| 6.30″| 15| .59″| B
09| Back panel| 1| 2045| 80.51″| 490| 19.29″| 3| .12″| A
10| Smaller door| 1| 698| 27.48″| 496| 19.53″| 15| .59″| A
Doubts? Get in touch:
Fone: (51) 3635-8839
www.kappesberg.com.br
NOTE: This product can be mounted with the door to your left or right.
IDENTIFICATION OF ACCESSORIES
NOTE: Separating the accessories before starting assembly will make it
easier.
Hardware
| Code| Description| Amou.
PF9| 50311| 
Flanged head screw 5,0x65mm| 6
PC8| 226| Flat head screw 4x4Omm| 12
PC4| 54117| Flat head screw 3,5x25mm| 6
PC3| 4214| Flat head screw 3,5x14mm| 32
01| 1802| Wooden Dowel 6x3Omm| 20
PR2| 108| Nail 12×12| 4
PR 1| 107| Nail lox 10mm| 51
BC| 529| Adapter sleeve| 6
CB| 41| White glue| 1
Dear Fitter:
- Before starting montagem check as conditions of the assembly environment;
- Check out all the packaging com a list of fish contained in this manual;
- Separate the accessories, check the measures two parafuses com to scale;
- Follow all the guidelines of this manual montagem for ter or direct to guarantee of the product;
- Discard the packages correctly, allocating either plastic or paper for recycling;
Hardware
| Code| Description| Amou.
PX| 63108| Handle| 2
EM| 58| Tag label “Kappesberg”| 1
TP2| NGFE/NGVE=63102
(Nogueirct)| Screw cap cover 13mm| 1 , I U
LM| 85| Metal angle bracket “L”| 4
CG| 899| Angle bracket| 4
S10| 17024| Safety bracket| 4
CS| 6959| Support cover| 4
PO| NGFE/NGVE=63110| Door| 1
S2| 118| Shelf support 6x8mm| 24
SD| | Shoe black| 4
GS| 40534| Silicone| 4
D011| 51322| Hinge 35mm| 5
61971| Hinge Screw 4,0×14| 30
Assembly Instructions
To assemble the suspended kitchen:
- Use the front baseboard “08” that comes with the furniture as a support for fixing it on the wall, using the “BC” bushing and the “PF9” screw.
- On each side, fix a metalized aerial support “S1 0” with the screw “PC3” and on the wall with the screw “PF9” and the bushing “BC”.
- Place a cover “CS” on each support “S1 0”.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>