Shenzhen ZD001 Doorbell Instruction Manual

Shenzhen-ZD001-Doorbell-fig-4

Doorbel lNSTRUCTION

Transmitter

Instructions:

• Transmitter Button: Press the transmitter button, the receiver indicator will flash and ring
• Music choice: Short-press to change music, and the default music is Dingdong when receiver turn on.
• controt: Short-press to change volume level

Signal Match:

How to match

• Plug receiver into a power outlet the indicator will flash 5S, When indicator is flashing.press trans mitter button, the 2 parts will be matched
• Repeat the steps If you need more receivers ar transmtters
  Note: Match the parts while indicator is flashing.

How to canoel match:
Press the recever music button about 10 seconds to cancel the curent match and re-match with newmore transmitters as your
Note: signal match has been completed by manufacture, no further actions are required. Tran smitter Installation:

Option 1-Adhesive patch mouting way

Option 2. Fixation by saew,

Attention

1. Test transmitter at instalation postion before fox, dheck the receiver can work properly or not

2. Wireless signal transmission distance is affected by metal wals, concrete, obstades, etc, avoid instaling the transmitter on a metal door or frame (signal only can reach 10-80m need to through metal doors, conarete wals, etc)

3. Keep the receiver away from magnetic field interference sources such as televisions, induction cookers, speakers, etc Please don’t disassemble the receiver to avoid safety
   problems.

   • Please avoid to prolonged exposure under the sunlight, itwill cause product life shorten.
     When the transmission signal becomes weak, please replace the battery.

Packing List:

• Tran mi tter
• Rec eiver
• Batterz
• Mamua l
• Tape/Screw

FCC Statement

This equipment has been tested and found to complywith the limits for a Class B digital de’Ace, pursuantto Part 15 of the FCC Rules. These limits are designed to pro\lde reasonable prolection againsl harmful interference in a residential installation. This equipment generates us es and can radiate radio frequency energy and, if nol inslalled and used in accordance with the inslructions, may cause harmful inlerference lo radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipmenl does cause harmful inlerference lo radio or lele\lsion reception, wllidl can be determined byturning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• lncreas e the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to Which the receiver is connected.
• Cons ull the dealer or an experienced radio/TVtechnician for help.
  This de,;ce complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This de,;ce may not cause harmful interference, and
2. this de,;ce must accept any interference received, induding inlerference thal may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could widthe users authorilyto operale the equipmenl

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>