Linkifun SP8505 Auto Motorcycle Smart Screen Instruction Manual

SP8505 Auto Motorcycle Smart Screen

“`html

Specifications

• Compliance: FCC Part 15
• Operating Conditions: Uncontrolled Environment
• Minimum Distance: 20cm between radiator and body

Product Usage Instructions

1. Installation Guide

The installation guide provides a reference diagram for
installing the motorcycle smart screen. Ensure to follow the actual
product received for installation instructions. If you have any
questions, refer to the product manual or contact customer
support.

2. Introduction and Operation of Buttons

To power on the device, press the power button. Upon startup,
you will enter the main interface where you can navigate using the
provided buttons.

3. Main Interface and Application Interface

The main interface displays current time, status, TF card
information, volume control, and day/night mode settings. Navigate
to the application interface for specific functions.

4. Android Auto

To use Android Auto, click on the application icon in the main
menu. Follow the on-screen prompts to connect your device. Ensure
your phone supports Google services and has essential software
installed from the Google Play store. Make sure Bluetooth is
connected for seamless operation.

FAQ

Q: What should I do if I encounter common faults with the

motorcycle smart screen?

A: Refer to the Common Fault Handling section in the user manual
for troubleshooting steps. If issues persist, contact customer
support for further assistance.

“`

OPERATING INSTRUCTIONS
Motorcycle smart screen Manual

FCC warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
*RF warning for Mobile device: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and o perated with minimum distance 20cm between the radiator & your body.

DIRECTORY

Warm Prompt ………………………………………………….

04

1 Installation Guide

…………………………………………………. 05

2Introduction and operation of buttons ………………………… 06

3 Main interface and application interface ………………….. 06

4. Android Auto …………………………………………………………… 07

5Airplay ………………………………………………………………… 08

6TF ………………………………………………………………………………. 09

7BT

…………………………………………………………… 09

8BT Ear

…………………………………………………………. 10

9DVR

…………………………………………………….. 11

10Set Up

…………………………………………………………….. 11

11. Dropdown bar ………………………………………………………… 14

12Power on startup password ……………………………………… 14

Common fault handling ………………………………………………….. 15

–02–

Warm prompt
1.Please carefully read the following instructions. 2.This device adopts negative electrode grounding and 12V power supply. 3.Please turn off the vehicle’s power before installation,and then turn on the power after installation is completed. 4.Please plan the optimal location before fixing the connected navigation recorder component. 5.It is strictly prohibited to use a high-pressure water gun to rinse or soak this product in water to prevent water from entering the body! 6.When connecting the camera,please correspond to the body identification. 7.The camera of this machine is fully enclosed and waterproof, but it is still necessary to avoid solvents such as degreasing oil, alcohol, and tar cleaning agents from coming into contact with the lens to avoid damaging the waterproof layer. 8.For the speed and security of file storage,please regularly clean up the storage space. 9.With the advancement of technology,the product structure and parameters will continue to be improved.This graphic and text is for reference only.If there are any pictures or descriptions that do not match the actual product,please refer to the actual display of the product. 10.This product is only used for motorcycles
–04–

1Installation Guide
The host and lens diagram shown is only a reference diagram for installation. This does not serve as the physical basis for this product.If there are any questions,please refer to the actual product received.Our company reserves the final interpretation right.

Installation diagram of adapter bracket

Camera installation diagram

Schematic diagram of movable bracket

Installation diagram of the host and bracket

Rendering –05–

2Introduction and operation of buttons

Power on>Enter the main interface>As shown in the figure

12 12

3

4

16:

5

67

Man

2

Main menu Current time Return to menu

Current status display Display TF

Current volume Day night mode

3Main interface and application interface

This device has multiple screens.Click on the application icon on the main interface to enter the application interface,and swipe to the right to switch between them. Click the button on the screen to enter the main interface,and click the button to enter the higher-level menu. Click on the application icon on the main interface to pop up a sound page, and drag to set the sound addition and subtraction. Click on the application icon on the main interface,and the main interface will switch between night mode and screen off mode.
–06–

4Android Auto

Click on the

application icon to enter the application interface,and connect

the device according to the prompts and personal needs.

The use of Android auto requires the phone to support Google services,install the following essential software in the Google Play store,and ensure Bluetooth is connected.

Bluetooth is in a connected state

Paired devices Click on settings,and the settings panel will automatically
pop up Click on Maps to open Google Maps Click on the phone to make a call Click to exit to return to the car system interface

an the mobile interface

After installing the above applications,click to open Android Auto and follow the prompts to install the corresponding services and updates.If it can be opened normally,it indicates that the software environment support is successful.
–07–

5 CarPlay

Click on the

application icon to enter the application interface,an

connect the device according to the prompts and personal needs.

Correct steps for Carplay wireless connection: Carplay wirelessly connects to iPhone,only requires Bluetooth connection,no need to manually connect to the host hot spot.

• After clicking on to connect successfully,the car machine will display the application screen,and relevant functional operations can be carried out at this time
  Bluetooth is in a connected State
  –08–

6TF

Click on the

application icon to enter the application interface, where

you can enter the audio and video playback interface.Select the audio and video

file to play.

Audio/video support formats:
AVI,MKV,QT,MPG,ASF,FLV,RMVB,MP3,WMA,ACC,WAVE,FLAC,APE,OGG,M4A
Image supported formats:BMP/GIF/JPG/PNG

/

7BT

Click on the

application icon to enter the Bluetooth interface.After connecting

to the phone Bluetooth,you can perform functions such as phone and music playback.

When the car is not paired with a device, go to Phone>Settings>Bluetooth>Search

for Device>Find the Bluetooth name CARBT-1AE”of the host to connect,The phone will pop up a PIN code box,enter (PIN code on the settings interface or confirm directly,and
display “Phone Device Name” to indicate
successful connection.

2.Pull and play function

Click on the number in the interface to

input the phone number.If the input is

incorrect,click

to delete it one by one.

After entering the phone number,

press to dial

Press to end the current call.

–09–

Received phone call Previous song

3.Telephone book Enter the phone book interface:Click the
[Sync Contact] button to confirm the popup synchronization contact book request, Search for contacts:After synchronizing
the contacts,clicking the button will
pop up a search box,Enter English letters to search,

4.Bluetooth call recording function
The call record interface can only synchronize the current call,power outage,
and missed call records.
On the call record interface,clicking on the of received calls,dialed calls, and missed calls in the list can also directly dial them gut,

Dialed numbers

Missed Calls

5.Bluetooth music playback function
Bluetooth music playback interface,which can be connected to a Bluetooth phone for playback/pause/up/down function
operationsUse Bluetooth music function to play songs on your phone,For some music players on your phone,you need to first enter the music page from your phone and click play.Previous

Pause/Play

Next song

8.BT Ear

Click the

application icon to enter the Bluetooth earphone interface.After connecting the

Bluetooth earphones,you can receive and operate phone and music functions.

1.Paired devices

Enable

When Bluetooth earphones are not paired

with a device:Enable Bluetooth earphones >

matching function>Click on the

host >Search for devices

Find

Bluetooth earphones to connect >Display

“Bluetooth earphone device name”to indicate

successful connection.

–10–

2.Equipment operation
When Bluetooth earphones are paired with
a device1,the device name will be displayed
and Bluetooth music and TF card music 1
sound can be transmitted.

Search for

Connect

Break

9DVR Click on the application icon to enter the recorder interface,where you can perform recorder related function operations.

1.Introduction to Interface Functions

Photograph Lock

Transcribe Recording on/off

Front/rear video switching

Video recording

Recording cycle time setting

1 2345 6 78

DVR setting:

2.Set Operation

Click

enter the settings interface:

Recording settings On/off Cycle time setting 1/2/3/5 minutes
Memory card Format
Version number

10Set UP

Click on the

application icon to enter the settings page and perform

related functional operations.

1.Basic Settings

change login passed Touch calibration Restore factory settings

–11–

2.Factory settings Enter password to enter factory settings

3.Sound Setup
There are two ways to enter the EQ interface: Enter the equalizer settings interface by clicking on the icon on the TF card and Bluetooth music,
In the settings function,enter the equalizer settings interface.

Equalizer

settings:

The equalizer settings interface provides 6 types of sound effects to choose from, The equalizer setting interface provides 10 segments of EQ for free adjustment.

4.Display

device

Brightness settings

Contrast setting

Color setting

Saturation setting

Reset

Restore

Default 50 Default 50 Default 50 Default 50 default 50

5.Screen saver

Brightness:

50

Contrast :

50

Hue :

50

Saturation:

50

Backlight

50

–12–

6.Desktop background Click on the corresponding image to
switch the background

7,Language setting
Supports multiple countries such as Simplified Chinese/English,drag the language bar upwards,select the desired language for language switching

8.Time setting
Click on the time icon through the application interface to enter the time setting interface.
In the settings function,enter the time setting interface.

Time setting
The device has the function of automatically calibrating the current time and connecting to Bluetooth Automatically calibrate time and time zone afterwards.

You can manually set the time zone and time format as needed

Time format

12 hours/24hours

9.System Information

Version OS APP MCU BT MAC
BT SET

displa Infoyrm: ation Display Information Display
Information Display Information Display
Infantryman

–13–

11Dropdown bar Drag the screen downwards from the top of the screen to bring up the dropdown menu shown below
Dropdown menu interface The host status bar and drop-down menu functions are as follows:

11

TFT Bluetooth Mute Sound effects
Brightness adjustment
Music Sound

Screen -On/Off Click to enter the Bluetooth interface Volume -On/Off
Click to enter the sound effects interface Screen -Dark/Bright
Previous/Next Reduce/ Increase

12Power on startup password
The default power an password is 0000,and you can enter the power on password setting by yourself through the “Settings”function item.

–14–

Common fault handling
1.The device cannot be turned on after the vehicle’s ACC power is turned on. Please check if the line connection is normal. 2.The front or rear camera does not display. The camera needs to be checked.If the front camera does not display,it will change to a rear camera after replacing the camera.If the rear camera does not display,it is a problem with the camera itself.Please replace it with a new camera.
3.Both the front and rear cameras are not displayed. Check if the camera cable connection is normal. 4.The recording is not clear. Suggest checking the lens for dust and wiping it clean.
5.Bluetooth cannot connect. Check if the Bluetooth password is correct when matching the host and phone.
6.Bluetooth earphones cannot be connected. Check the compatibility between the host and Bluetooth earphones.If the host cannot find Bluetooth earphones and there is incompatibility,please connect or replace the earphones multiple times.
7.Unable to replay recorded videos or photos in the app. Please check if the TF-SD card is damaged.
8.If there is electromagnetic interference from stripes on the screen display or recorded video. Please check if there are any issues with the camera wiring and bundling.The wiring should be smooth,non fold able, and leave a certain margin.The bundling should not be too tight or the car shell should not be squeezed too tightly.
–15–

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>