Pyle PP777 Phono Turntable Preamp User Manual
- June 12, 2024
- Pyle
Table of Contents
Pyle PP777 Phono Turntable Preamp
IMPORTANT SAFETY INSTRUCTIONS
-
Read Instructions: All the safety and operating instructions should be read before the appliance is operated.
-
Retain Instructions: The safety and operating instructions should be retained for future reference.
-
Heed Warnings: All warnings on the appliance and in the operating instructions should be adhered to.
-
Follow Instructions: All operating and use instructions should be followed.
-
Water and Moisture: The appliance should not be used near water-for example, near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool, or a wet basement.
-
Ventilation: The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings: or placed in a built-in installation, such as a bookcase or cabinet that may impede the
the flow of air through the ventilation openings. -
Heat: The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.
-
Power Sources: The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.
-
Grounding or Polarization: Precaution should be taken to insure that the grounding or polarization means of an appliance are not defeated.
-
Power-Cord Protection: Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point at which they exit from the appliance.
-
Cleaning: The appliance should be cleaned only as recommended by the manufacturer.
-
Power Lines: An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
-
Non-use Periods: The power cord of the appliance should be unplugged from the outlet when the appliance is to be left unused for a long period of time.
-
Object and Liquid Entry: Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.
-
Carts and Stands: If the appliance is used with a cart or stand, the cart or stand should be a type recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces cause the appliance and cart combination to overturn.
-
Mounting: The appliance should be mounted only as recommended by the manufacturer.
-
Damage Requiring Service: The appliance should be serviced by qualified service personnel when:
-
The power-supply cord or plug has been damaged.
-
Objects have fallen into, or liquid has been spilled into the appliance enclosure.
-
The appliance has been exposed to rain.
-
The appliance has been dropped, or the enclosure damaged.
-
The appliance does not appear to operate normally or exhibit a marked change in performance.
-
Servicing: The user should not attempt to service the appliance beyond that described in the user’s operating instructions. All other servicing should be referred to qualified personnel.
-
Overloading: Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
-
Replacement Parts: When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in re, electric shock, or other hazards.
-
Safety Check: Upon completion of any service or repairs to this appliance, ask the service technician to perform safety checks to determine that the appliance is in proper operating condition.
FEATURES AND CONTROLS
Pyle Phono Turntable Preamp MiniElectronic Audio Stereo Phonograph Preamplifier with RCA Input, RCA Output & Low Noise Operation Powered by 12 Volt DC Adapter.
This electronic preamplifier stands up to the test and will provide you with serious sound performance. The PP444 is perfect for bringing your studio equipment’s phono-level output to a more suitable line-level output. It’ll take your audio signal, amplify its strength and prepare it for further processing by your receiver or amplifier. Preamps technically provide voltage gain to your desired equipment and are key to assisting the signal source, whether it’s a turntable, musical instrument or microphone. The ultra-low noise audio conditioning circuitry allows the preamp to boost audio to levels that are more manageable for various types of audio equipment. You’ll find it easier to adjust the recording level volumes of different sources from microphones and instruments alike. You should position your preamp close to the source to reduce unwanted noise and interference. Preamps can sometimes come built into the stereo equipment, but if that’s not the case, the PP444 is an easy install, wise choice and great addition to any musician or producer. Take your sound and audio production skills to the next level with the PP444 Preamplifier.
Features and Technical Specs:
- Converts Phono Signals to Line LevelSignals
- State-of-the-Art Circuitry Accommodates Magnetic Pickups
- Ultra-Low Noise Operation Improves Sound Performance
- Connects to Turntables and Other Studio Equipment
- Input Sensitivity: 3mV at SOK Ohms (Phono)
- Dedicated RCA and 1/4″ Output Connectors
- Power On LED Indicator
- Power Supply Included, DC 12V/150mA
- Dimensions (W x D x H):4.09″ x 2.28″ x 1.38″
CONNECTION DIAGRAM
This product can expose you to a chemical or group of chemicals, which may include ”Nickel Carbonate” which is known in the state of California to cause cancer, birth defects, or other reproductive harm. For more info, go to https://www.p65warnings.ca.gov/.
Questions? Issues?
We are here to help!
- Phone: (1) 718-535-1800
- Email: support@pyleusa.com
- PyleUSA.com
FREQUENTLY ASKED QUESTIONS
What is the Pyle PP777 Phono Turntable Preamp?
The Pyle PP777 Phono Turntable Preamp is a device that amplifies the signal from a turntable's phono output to a line-level output, allowing you to connect your turntable to audio systems or amplifiers that do not have a dedicated phono input.
How does the phono preamp work?
The phono preamp takes the low-level signal produced by the turntable's cartridge and amplifies it to a standard line-level signal. This line-level signal is then compatible with audio systems and amplifiers that typically expect higher-level input signals.
What types of turntables can the PP777 work with?
The PP777 is designed to work with turntables that have a standard phono output. This includes both older record players without built-in preamps and modern turntables with a phono output.
Does the PP777 require external power?
Yes, the Pyle PP777 Phono Preamp requires external power to function. It comes with a power adapter that needs to be plugged into an electrical outlet.
Does the PP777 have adjustable gain settings?
No, the PP777 does not have adjustable gain settings. It provides a fixed gain level suitable for most turntable setups.
Can I connect multiple turntables to the PP777?
The PP777 is designed to connect one turntable at a time. If you have multiple turntables, you would need additional phono preamps or a switcher to connect them to a single audio system.
What type of output does the PP777 have?
The PP777 features RCA line-level outputs, which are compatible with most audio systems, amplifiers, and receivers.
Is the PP777 compatible with both moving magnet (MM) and moving coil (MC) cartridges?
Yes, the PP777 is compatible with both MM and MC cartridges. It provides the necessary amplification for both types of cartridges.
Does the PP777 have a built-in equalizer for RIAA correction?
Yes, the PP777 has a built-in RIAA equalizer, which corrects the frequency response of the audio signal to match the standard RIAA curve used for vinyl recordings.
Can I use the PP777 with powered speakers?
Yes, the PP777 can be used with powered speakers. You can connect the line- level output of the PP777 to the input of powered speakers using RCA cables.
Does the PP777 support ground connection?
Yes, the PP777 has a ground connection terminal. You can connect the ground wire from your turntable to minimize potential hum or noise issues.
Is the PP777 suitable for professional audio setups?
The PP777 is primarily designed for consumer-level audio setups. While it can work in some professional environments, it may not have the same level of performance or features as higher-end phono preamps.
Does the PP777 come with cables?
The PP777 typically does not come with RCA cables included. You would need to purchase them separately to connect the preamp to your audio system or amplifier.
Can the PP777 improve the sound quality of my turntable?
The PP777 primarily serves as a necessary component to match the output of a turntable to the input requirements of an audio system. While it can enhance the overall audio quality by providing the correct amplification and equalization, its primary function is to ensure proper compatibility rather than significantly improving sound quality.
DOWNLOAD THE PDF LINK:Pyle PP777 Phono Turntable Preamp User Manual