etac 8160 0040 Support Handle for Bath Board Instruction Manual
- June 12, 2024
- Etac
Table of Contents
etac 8160 0040 Support Handle for Bath Board
Product Information
- Product Name: Unknown
- Model Number: 78196.5
- Date of Manufacture: September 12, 2022
Components Included:
- 1 x Component x1
- 2 x Component x2
- 1 x Component x1
Product Usage Instructions
- Ensure that all components mentioned in the assembly instructions are present.
- Identify the component labeled “x1”. This component should be used in step 1 and step 3.
- Identify the component labeled “x2”. This component should be used in step 2.
- Begin by assembling step 1:
- Take one of the “x1” components and align it with the corresponding slot or attachment point as indicated in the assembly diagram.
- Secure the “x1” component in place using the provided fasteners or connectors.
- Proceed to step 2:
- Take one of the “x2” components and align it with the corresponding slot or attachment point as indicated in the assembly diagram.
- Secure the “x2” component in place using the provided fasteners or connectors.
- Finally, complete step 3:
- Take the remaining “x1” component and align it with the corresponding slot or attachment point as indicated in the assembly diagram.
- Secure the “x1” component in place using the provided fasteners or connectors.
Make sure all connections are secure and properly tightened. Refer to the assembly diagram for any additional details or specific instructions. If you encounter any difficulties during the assembly process, please consult the product manufacturer or contact customer support for assistance.
WHAT INBOX
78196.5 2022-09-12
INSTALLATION
Support handle for bath board, Fresh
Etac Supply Center AB Långgatan 12 SE-334 33 Anderstorp
www.etac.com
REF 8160 0040
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>