global sources W1 Wireless Headset User Guide
- June 5, 2024
- global sources
Table of Contents
global sources W1 Wireless Headset
PRODUCT OVERVIEW
- Protein memory earmuff
- Detachable Microphone
- Power Button and LED on/off
- Microphone Jack
- Type C Jack for charging
- Power LED indicator
- 3.5 mm Audio Jack
- Volume Wheel
- Microphone Mute Switch
- EQ Music/Game Sound option
- Transmitter indicator
- USB-C wireless Dongle
- USB-A
- 3.5 mm Audio Cable
- USB Charging Cable
SETUP
Connection to USB-A ( PC/P5/P4/Switch Dock )
Connection to USB-C ( PC/MAC/Switch
TABLET/Android )
Xbox controller or other 3.5mm with CTIA Jack
device ( LED will be automatically off ）
CHARGING
To charge the headset, connect the USB charging cable to the Type C jack on
the headset, and plug the other end into any USB power source (DC 5V /1A).
The color of the power LED indicates the battery status
- Charging : Red
- Full Capacity : led off( Need charging around 4h)
- Low battery :Blue (fast blink) and hearing a tone twice per minute
- Eco Mode : Headset automatically power off if not pairing within 10 mins.
Note : The headset will be automatically power off once charging.
To protect battery it is recommend to disconnect charging cable once battery
full capacity
POWER ON/OFF / PAIRING
POWER ON/OFF
To power on the headset press and hold the power button for at least 5
seconds. You will hear a tone, and the power LED will illuminate.
To power off the headset press and hold the power button for at least 5
seconds, You will hear a tone and the power LED will off.
LED ON/OFF: To on/off led press the power button one time
PAIRING
Note: The headset is already paired with the transmitter out of the box or
if you want re-pairing press and hold the power button for at least 8 seconds,
power led from blue slow blink to quick blink then stable blue illumination,
and transmitter indicator illuminates Green led.
PACKAGE CONTENTS
- Wireless Headset
- USB-C Wireless Dongle
- USB Charging Cable
- USB-A
- Detachable Microphone
- 3.5mm line-in Cable
- User Manual
SYSTEM REQUIREMENTS // COMPATIBILITY
- PC/MAC
- Playstation 4/5
- Nintendo Switch
- Android (with USB-C)
HEADSET SPECIFICATION
- Speaker size：50MM
- Impedance：32Ω
- Frequency : 20HZ-20KHZ
- Output power : 20mW
- Max power :30mW
- Battery Capacity：1000mAH
- Battery type : polymer lithium battery
- Charging time：4H
- With led around：10H
- Without led around：18H
- Transmission distance：10 meters
- Operating Voltage：3.7V
- Charging Voltage：DC5V/1A
- Microphone size :60*50
- Micophone sensitvity：-40±3dB
- Micophone indicative：Omni-directional
- Poweroff Currency 0.05UA
TRANSMITTER SPECIFICATION
- Working Voltage ：5V
- Working Currency：90mA
- Frequency：2403MHZ-2477MHZ
- Transmitted Power：9 -12dB
- Receiving sensitivity：-80dBM