LENA LIGHTING Terra 2 LED Recessed Square LED Luminaire with High Total Luminous Flux Instruction Manual
- June 12, 2024
- LENA LIGHTING
Table of Contents
LENA LIGHTING Terra 2 LED Recessed Square LED Luminaire with High Total
Luminous Flux
Product Information
The Terra 2 LED is a lighting fixture designed for recessed and surface installations. It operates on a voltage range of 220-240V with a frequency of 50-60Hz. The fixture is IP20 rated, making it suitable for indoor use.
The Terra 2 LED is available in different versions, including:
- Terra 2 LED LONG P x2
- Terra 2 LED LONG P x4
- Terra 2 LED P 1195×300 x2
- Terra 2 LED P 1195×300 x4
- Terra 2 LED P 595×300
- Terra 2 LED P 595×595 x2
- Terra 2 LED P 595×595 x4
The fixture also has options for single driver versions, silicone tubes, and DALI compatibility.
Product Usage Instructions
Installation:
For recessed versions, follow the installation instructions provided by a qualified person.
For surface versions, use the appropriate brackets and ensure there is a free space of about 10 cm around the installed luminaire.
Protection System:
The Terra 2 LED has a protection system labeled as “A” and “B”. Follow the instructions provided for proper installation and usage.
Multiwatt Setup:
Select the desired current and power settings for the fixture based on the
provided specifications. The available options include:
- Current: 700 mA, 1050 mA, 1150 mA, 1250 mA, 1400 mA
- Power: 24W, 36W, 40W, 44W, 49W
Versions with Connector
- If using versions with a connector, follow the provided instructions for proper installation and usage.
Note: It is recommended to refer to the complete user manual for detailed instructions and safety information.
INSTALLATION INSTRUCTIONS
-
x2 VERSIONS
-
SINGLE DRIVER VERSIONS
-
MULTIWATT SETUP
-
x4 / 2-DRIVERS VERSIONS
Do not cover the lighting fitting with an insulation mat or other materials. There should be free space (about 10 cm) provided around the installed luminaire.
x2 VERSIONS
SINGLE DRIVER VERSIONS
MULTIWATT SETUP
VERSIONS WITH CONNECTOR
There should be free space (about 10 cm) provided around the installed luminaire.
DISASSEMBLY.
1195 / 595 VERSIONS
15095×595 VERSIONS
ASSEMBLY
Terra 2 LED 1195×140 MAG
Terra 2 LED 1195×230
Terra 2 LED 595x595x x 2MAG
Terra 2 LED 595x595x x 4MAG
Terra 2 LED 595 x 300
MOUNTING TO SURFACE
CEILING SAFETY ROPE
Assembly should be carried out by a qualified person.
Dirtiness that settle down on the diffuser due to normal operation of the fitting shall be cleaned with a damp cloth. Do not use abrasive cleaners
We would like to inform you that our product’s are marked in accordance with
the European Directive 2002/96/CE and Polish Act o n used electric and
electronic equipment with a sign of a crossed-out waste container:
This mark informs abort the fact that the device, after its application use,
cannot be placed together with other types of household waste. The user is
obliged to return it to the entities conducting a collection of used electric
and electronic equipment. The collection points, including local collection
points, shops and municipal entities create a proper system making it possible
for the return of the equipment. Proper proceeding with used electric and
electronic equipment contributes to the avoidance of damaging consequences for
the health of the inhabitants and natural environment chick result form the
presence of dangerous substances and improper storage and processing of such
devices and equipment.
LENA LIGHTING S.A.
ul.Kornicka 52, 63-000 Sroda Wlkp.
POLAND
tel. +48 61 28 60 300
e-mail: office@lenalighting.pl
www.lenalighting.pl
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>