Moes BT-B-EU1-MS Scene Switch User Manual
- June 12, 2024
- MOES
Table of Contents
Moes BT-B-EU1-MS Scene Switch User Manual
Product Introduction
- This Scene Switch is powered by battery, which is developed under ZigBee/BLE communication. After connecting with ZigBee/BLE gateway and adding into Smart life App, it allows you to quickly “set the scene” for a particular room or living scene, like Reading, Movie, and so on.
- Scene Switch is a time and energy-saving item alternative to the traditional hard-wired switch, with push button deisign It can be stick on the wall or put it on everywhere you like.
Scene Switch with Your Smart Home
Specification
Installation
Open the cover then put the button battery in the battery slot. Press the button on the switch, the indicator will turn on, it means that the switch works correctly.
Fix it as Where as You Want
Connection and Operation
Indicator LED
Long press the button, the indicator will turn on.
The indicator flash quickly, it means that the switch under process of network
connecting.
Scene Switch Operate: Each one button can be adapted upto three different
scenarios through the APP.
(Single Click) : Activate the 1st scene
(Double Click) : Activate the 2nd scene
Long Hold 5s: Activate the 3nd scene
Press and Hold button 1 for 10s get into pair mode, LEDs will quick flash
APP Operation
1.Search the App in the store or scan the QR code on the package/ manual to download and install the App.
Please scan the QR code or download Smart Life on App store.
2. Register and login
If you download for the first time, please click the “register” button to
register your account.lf you have an account, click the “login” button.
3. Add devices
Note: Intelligent gateway needs to be added before adding devices Connect the
device to the power supply, press and hold the first button to put the device
into the network configuration mode, and ensure that the mobile phone is
connected toxsam network. Open the app, on the “smart gateway” page, click
“add subdevice”, and click “LED already blink”.
Wait for device networking to succeed, Click “DONE” to add the device
successfully.
*NOTE: If you fail to add the device, please move the gateway closer to the product and reconnect the network after powering on.
After connecting the network successfully, you will see the Intelligent Gateway page, choose the WIRELESS SWITCH 2 to enter the controlling page, then choose “Add intelligence” enter to the setting mode.
Choose “Add condition” to choose the controlling condition, such as “Single click”, the choose “Add task” choose the controlling action.
Such as choose the On/Off status of the switch.
Save your collocation, the you could use the scene switch to control the light.
SERVICE
- During the free warranty period, if the product breaks down during normal use, we will offer free maintenance for the product.
- Natural disasters/man-made equipment failures, disassembly and repair without the permission of our company, no warranty card, products beyond the free warranty period, etc., are not within the scope of free warranty
- Any commitment (oral or written) made by the third party (including the dealer/service provider) to the user beyond the warranty scope shall be executed by the third party
- Please keep this warranty card to ensure your rights 5.Our company may update or change the products without notice.
Please refer to the official website for the updates.
RECYCLING INFORMATION
All products marked with the symbol for separate collection of waste electrical and electronic equipment (WEEE Directive 2012/19 / EU) must be disposed of separately from unsorted municipal waste. To protect your health and the environment, this equipment must be disposed of at designated collection points for electrical and electronic equipment designated by the government or local authorities.
Correct disposal and recycling will help prevent potential negative consequences for the environment and human health. To find out where these collection points are and how they work, contact the installer or your local authority.
WARRANTY CARD
Thank you for your support and purchase at we Moes, we are always here for your complete satisfaction, just feel free to share your great shopping experience with us.
If you have any other need, please do not hesitate to contact us first, we will try to meet your demand.
WENZHOU NOVA NEW ENERGY CO.,LTD
Address: Power Science and Technology
Innovation Center, NO.238, Wei 11 Road,
Yueqing Economic Development Zone,
Yueqing, Zhejiang, China
Tel:+86-577-57186815
Email: service@moeshouse.com
AMZLAB GmbH
Laubenhof 23, 45326 Essen
Made In China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>