BEAUTME BM3C Wall-Mounted LED Bathroom Mirror User Manual

June 12, 2024
BEAUTME

BEAUTME-logo

BEAUTME BM3C Wall-Mounted LED Bathroom Mirror

BEAUTME-BM3C-Wall-Mounted-LED-Bathroom-Mirror-product

Product Information

Name| Model| Voltage| Lighting Power| Anti-fog Power| Input| Product Size| Frame Color| Color Temperature| Material
---|---|---|---|---|---|---|---|---|---
WALL-MOUNTED LED BATHROOM MIRROR| N/A| N/A| N/A| N/A| N/A| 29.5mm / 1.2| 915mm / 36| 132mm / 5.2| 400mm / 15.7| 710mm / 28

Product Installation

Accessories included:

  • Tray *1
  • Tray screw and washer *3
  • Foam pads *2
  • Hook *2
  • Expansion Hook screw pipe *4

Step 1. Tray installation:

  1. This mirror supports two wall-mounted methods, Horizontal or Vertical.
  2. Fix the tray to the mirror according to your actual situation.

Step 2. Foam pads installation:

  1. Paste the foam pad to the back of the mirror.
  2. Horizontal paste position.
  3. Vertical paste position.

Step 3. Wall-Mounted Ways and Demonstration:

  1. Use the level vial to choose a suitable location on the wall and mark it.
  2. Drill holes and insert the expansion tube into the hole.
  3. Fix the hook with screws.
  4. Hang up the mirror as above demonstration.

Step 4. Two Ways Of Connection:

  1. Horizontal: Screw holes located at the bottom left.
  2. Vertical: Screw holes located at the bottom right.
  3. Take off the sticker.
  4. Put the tray on before installation and tighten with screws.
  5. Connect to power source directly by using the plug installed.
  6. Through the connector provided, here is how:
  7. Remove the plug by pulling up the buttons of the connector.
  8. Connect the wire from your home power source to one end of the connector.
  9. Make sure all wires are settled firmly.

Operating Instruction

BEAUTME-BM3C-Wall-Mounted-LED-Bathroom-Mirror-fig-
\(1\)

Dimension

BEAUTME-BM3C-Wall-Mounted-LED-Bathroom-Mirror-fig-
\(2\)

Notice

For warranty, please kindly contact us for return policy if any issues happen.

  1. Please read the instructions carefully before using.
  2. Make sure that your charging device is adequate for the mirror voltage rating before using.
  3. Turn off the power and avoid direct sunlight if not used or stored for a long time. Far away from children’s access.
  4. Please do not disassemble or remodel mirror, and keep it away from sharp things.
  5. Please do not use corrosive liquids to clean the mirror.
  6. Please do not violently throw, hit and rub mirror.
  7. Do not approach or put the product into the fire in case of fire or explosion.
  8. Please stop using it immediately if an abnormality occurs.

Product Information

Name Wall-Mounted LED Bathroom Mirror
Model BM3C
Voltage 12V 4A
Lighting Power Max 48W
Anti-fog Power Max 30W
Input UL110V
Product Size 915×710×29.5mm (36×28×1.2 inches)
Frame Color Silver
Color Temperature White Light 6500K, Natural Light 4800K, Warm Light 3200K
Material Aluminium + Glass

Product Installation

Accessories included

BEAUTME-BM3C-Wall-Mounted-LED-Bathroom-Mirror-fig-
\(3\)

Step 1. Tray installation

  1. This mirror supports two wall-mounted methods, Horizontal or Vertical
  2. Fix the tray to the mirror according to your actual situation

BEAUTME-BM3C-Wall-Mounted-LED-Bathroom-Mirror-fig-
\(4\)

  • Horizontal Screw holes located at the bottom left
  • Vertical Screw holes located at the bottom right
  • Take off the sticker before installation
  • Put the tray on and tighten with screws

Step 2. Foam pads installation

BEAUTME-BM3C-Wall-Mounted-LED-Bathroom-Mirror-fig-
\(5\)

  1. Paste the foam pad to the back of the mirror
  2. Horizontal paste position
  3. Vertical paste position

Step 3. Wall-Mounted Ways and

BEAUTME-BM3C-Wall-Mounted-LED-Bathroom-Mirror-fig-
\(6\)

  1. Use the level vial to choose a suitable location on the wall and mark it
  2. Drill holes and insert the expansion tube into the hole
  3. Fix the hook with screws
  4. Hang up the mirror as above demonstration

Step 4. Two Ways Of Connection

BEAUTME-BM3C-Wall-Mounted-LED-Bathroom-Mirror-fig-
\(7\)

  1. Connect to power source directly by using the plug installed
  2. Through the connector provided, here is how:
    • remove the plug by pull up the buttons of the connector
    • connect the wire from your home power source to one end of the connect
    • make sure all wires settled firmly

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals