BEAUTME BM3H Wall-Mounted LED Bathroom Mirror User Manual

June 10, 2024
BEAUTME

beautme-logo

BM3H Wall-Mounted LED Bathroom Mirror

BEAUTME-BM3H Wall-Mounted-LED-Bathroom-Mirror-product-
image

Wall-Mounted LED Bathroom Mirror User Manual

Product Information
  • Name: Wall-Mounted LED Bathroom Mirror
  • Model: [insert model number]
  • Voltage: [insert voltage]
  • Lighting Power Input: [insert lighting power input]
  • Product Size: 29.5mm / 1.2 x 1524mm / 60 x 1016mm / 40
  • Frame Color: [insert frame color]
  • Color Temperature: [insert color temperature]
  • Material: [insert material]

Product Usage Instructions

  1. Read the instructions carefully before using.
  2. Make sure that your charging device is adequate for the mirror voltage rating before using.
  3. Turn off the power and avoid direct sunlight if not used or stored for a long time. Keep the mirror away from children’s access.
  4. Do not disassemble or remodel the mirror, and keep it away from sharp objects.
  5. Do not use corrosive liquids to clean the mirror.
  6. Do not violently throw, hit, or rub the mirror.
  7. Do not approach or put the product into the fire in case of fire or explosion.
  8. Stop using it immediately if abnormality occurs.

Product Installation

Included Accessories
  • Foam pads x 2
  • Hook x 2
  • Expansion pipe x 6
  • Hook screw x 6

Step 1. Foam Pads Installation

  1. Paste the foam pad to the back of the mirror.
  2. Horizontal paste position.

Step 2. Wall-Mounted Method

  1. Choose a suitable location on the wall and mark it.
  2. Drill holes and insert the expansion tube screws into the hole.
  3. Fix the hook with the hook screws.
  4. Hang up the mirror as above demonstration.

Step 3. Two Ways of Connection

  1. Connect to power source directly by using the plug installed.
  2. Connect by the connector provided. The method is as follows:
  3. Remove the plug by pulling up the buttons of the connector.
  4. Connect the wire from your home power source to one end of the connector.
  5. Make sure all wires are settled firmly.

Operating Instructions

  • OFF/ON: Touch switch to turn on or off the mirror.
  • 3 color lights modes: Choose between different color light modes.
  • Brightness: Adjust the brightness of the mirror.

Notice

For warranty, please kindly contact us for return policy if any issues happen.

WALL-MOUNTED LED BATHROOM MIRROR

BEAUTME-BM3H Wall-Mounted-LED-Bathroom-Mirror-02

Product Operating Instruction

BEAUTME-BM3H Wall-Mounted-LED-Bathroom-Mirror-01

Notice
For warranty , please kindly contact us for return policy if any issues happen.

  1. Please read the instructions carefully before using.
  2. Make sure that your charging device is adequate for the mirror voltage rating before using.
  3. Turn off the power and avoid direct sunlight if not used or stored for a long time. Far away from children’s access.
  4. Please do not disassemble or remodel mirror, and keep it away from sharp things.
  5. Please do not use corrosive liquids to clean the mirror.
  6. Please do not violently throw, hit and rub mirror.
  7. Do not approach or put the product into the fire in case of fire or explosion.
  8. Please stop using it immediately if abnormality occurs happen.

Product Information

Name

Model

| Wall-Mounted LED Bathroom Mirror

BM3H

---|---
Voltage| 12V 4A
Lighting Power| Max 48W
Input| UL110V
Product Size| 1524×1016×29.5mm (60×40×1.2 inches)
Frame Color| Silver
Color Temperature| White Light 6500K, Natural Light 4800K, Warm Light 3200K
Material| Aluminum + Glass
|

Installation

accessories

BEAUTME-BM3H Wall-Mounted-LED-Bathroom-Mirror-03

Step 1. Foam pads installation BEAUTME-BM3H Wall-Mounted-LED-Bathroom-
Mirror-04

  1. 1. Paste the foam pad to the back of the mirror
  2. Horizontal paste position

Step 2. Wall-Mounted Method

BEAUTME-BM3H Wall-Mounted-LED-Bathroom-Mirror-05

  1. Choose a suitable location on the wall and mark it
  2. Drill holes and insert the expansion tube into the hole
  3. Fix the hook with screws
  4. Hang up the mirror as above demonstration

Step 3. Two Ways Of Connection

BEAUTME-BM3H Wall-Mounted-LED-Bathroom-Mirror-06

  1. Connect to power source directly by using the plug installed
  2. Connect by the connector provided. The method as follows:
  3. Remove the plug by pull up the buttons of the connector
  4. Connect the wire from your home power source to one end of the connect
  5. Make sure all wires settled firmly

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals