Sentry Industries Inc Zigzags: Stereo Earbuds with in-line Mic – Red Instructions Manual

: June 4, 2024
: Sentry Industries Inc

Table of Contents

Sentry Industries Inc

Sentry Industries Inc

Sentry Industries Inc Zigzags: Stereo Earbuds with in-line Mic – Red

Sentry-Industries-In-Zigzags-Stereo-Earbuds-with-in-line-Mic
Red

Specifications

BRAND: Sentry Industries Inc.
COLOR: Red
FORM FACTOR: In Ear
CONNECTIVITY TECHNOLOGY: Wired
SPECIAL FEATURE: Microphone
COMPATIBLE WITH: mobile phones, MP3, iPhone, Blackberry, and more
FREQUENCY: 20Hz-20kHz
IMPEDANCE: 32 Ohms
CORD LENGTH: 4Ft (1.2m)
PRODUCT DIMENSIONS: 3 x 1 x 7.75 inches
ITEM WEIGHT: 1.13 ounces
OTHER DISPLAY FEATURES: Wireless
INCLUDED COMPONENTS: Plug type: 3.5m Drivers: 10mm

Introduction

Sentry Industries has been providing the best audio technologies since 1962. Consumer electronics have been excellent for more than 50 years. Sentry Industries always ensures customer satisfaction by offering premium design alternatives and high-quality materials.

These stereo earbuds have in-line microphone and are compatible with mobile phones, MP3, iPhone, Blackberry and more. Their frequency ranges from 20 Hz to 20 kHz at 32 Ohms impedance. The cord is 4 feet long.

WHAT’S IN THE BOX

Drivers: 10mm
Plug type: 3.5m

HOW TO WEAR

Put the in-ear headphones on after ensuring proper orientation. Put the ear tip of either side of your head where it belongs. With the help of the other hand, gently pull your earlobe to make room for inserting the ear tip into your ear canal. Put the wire in front of or behind you, depending on your inclination.

HOW TO USE IN-LINE MIC

Select the “Sound” section under the “System” heading in Settings. …
Choose the microphone or recording device you want to use by clicking “Choose your input device” under the “Input” section. …
Speak into your microphone to check it out.

HOW TO KNOW IF WIRED EARBUDS HAVE MIC

Since they are physically attached to the cable, finding them is simple. You should be able to locate the volume up, volume down, and pause buttons in a rectangular compartment by running your fingertips along the headphone cable. After discovering this, look for a little hole; this will be the microphone.

HOW MICROPHONE ON EARBUDS WORKS

You can speak into your earphones to record audio since microphones and earphones use vibrating diaphragms to transform sound into electrical impulses and back again.

HOW TO MAKE EARBUDS LAST LONG

Take Care to store them. Your first line of defense should be to store your headphones properly.
Keep the cable and earbuds clean.
Check Connections; Use the Cleaning Tool; and
Keep them dry, change the sleeves, invest in long-lasting listening products, and keep them dry.

Frequently Asked Questions

Are earphones with wires still common?

In a world where wireless listening equipment predominates, wired earphones might still have a place. Despite the fact that more and more people are buying wireless headphones like Apple’s AirPods, there are still good reasons to use wired earbuds.

An in-line microphone is what?

When you wear a headset, your mouth will be close to the inline microphone, which is a microphone that is incorporated into the cable. If you use gadgets like your smartphone while wearing headphones or earbuds, this capability is excellent for you.

Why do famous people wear wired headphones?

Some of the celebrities give more pragmatic justifications for wearing wired headphones—you don’t have to be concerned about battery life or Bluetooth problems—while others give more lofty justifications.

In-line or built-in microphones: Which is superior?

A built-in microphone is used by classroom headphones with inline microphones on the cord that hangs between your chin and chest. Inline mics have the benefit of being more durable because there isn’t anything for users to grip or bend. The fact that inline mic headsets are less expensive is an additional benefit.

Is inline mic up to par?

When purchasing new headphones with microphones, keep in mind that certain in- line microphones are better than others at reducing background noise. In-line microphones are typically of lower quality and may not be appropriate for sound recording.