varjo RZ06-05010L Chroma Wired Gaming Controller Instruction Manual

varjo RZ06-05010L Chroma Wired Gaming Controller

Specifications:

• Product Name: VR Controller RZ06-05010L/RZ06-05010R
• Designed for Gamers
• Manufacturer: Gamers Inc.

Product Information

The VR Controller RZ06-05010L/RZ06-05010R is designed for gamers, providing an immersive gaming experience. With a focus on quality and performance, this controller offers precise control and responsiveness for your virtual reality games.

Product Usage Instructions

Charge Up:
Make sure to charge the VR controller using the provided charging cable before initial use. Connect the cable to a power source and the controller to ensure it is fully charged.

Power On:
To power on the VR controller, press and hold the power button until the status indicator lights up. This indicates that the controller is ready to use.

Get Connected:
Pair the VR controller with your VR headset or gaming console following the manufacturer’s instructions. Ensure a stable connection for optimal performance.

Check Power:
Monitor the status indicator to check the power level of the controller. Recharge when necessary to avoid interruptions during gameplay.

Strap Off :
Adjust the strap of the VR controller for a comfortable fit on your hand. Make sure it is secure to prevent accidental drops during use.

Safety Guidelines:
Follow all safety guidelines provided in the user manual to ensure safe and enjoyable gaming sessions. Avoid exposing the controller to extreme temperatures or liquids.

Maintenance and Use:
Regularly clean the VR controller with a soft, dry cloth to keepit free from dust and dirt. Avoid using harsh chemicals that may damage the device.

FAQ:

• Q: How do I reset the VR controller?
  A: To reset the VR controller, locate the reset button (usually a small hole) and use a paperclip or pin to press and hold it for a few seconds until the controller resets.

• Q: Can I use the VR controller with different VR systems?
  A: The compatibility of the VR controller may vary depending on the system. Refer to the user manual or contact customer support for specific information on compatibility with different VR systems.

WHAT’S INSIDE

VR Controller {RZ06-05010L/RZ06-05010R)

• Tracking Halos
• Thumbsticks
• Action buttons
• Menu buttons
• Status Indicators
• Triggers
• Grip buttons
• Elastic strap
• Lock strap buttons
• Charging ports

Important Product Information Guide

WHAT’S NEEDED

• 4th Generation Varjo headsets

LET’S GET YOU COVERED

To learn more about Varjo’s warranty policy, visit: varjo.com/warranty

GETTING STARTED

CHARGE UP

For best results, use the charging cable that comes with the VR Controller to connect it to a source that can supply 6 watts (5 volts, 1.2 amps) of power .

POWER ON

GET CONNECTED

Follow your Varjo headset’s instructions to pair it with your VR Controller. While pairing, keep both devices within a very close distance of each other .

USING YOUR VR CONTROLLER

CHECK POWER

STRAP OFF

SAFETY AND MAINTENANCE

SAFETY GUIDELINES

To achieve maximum safety while using your VR Controller, we suggest that you adopt the following guidelines

• Should you have trouble operating the device properly and troubleshooting does not work, unplug the device and contact the Razer hotline or go to support.varjo.com for assistance.
• Do not take apart the device, and do not attempt to operate it under abnormal current loads. Doing so will void your warranty.
• Operate the device only within the specific temperature range of 0°C (32 ° F} to 40°C (104 ° F}. Should the temperature exceed this range, unplug and/or switch off the device to let the temperature stabilize to an optimal level.
• Although the VR Controller may be used while charging, avoid doing so while standing up toprevent accidents.
• Do not wait for the battery to be entirely empty before recharging.
• Do not leave your VR Controller plugged in after it has been fully recharged.
• Do not wash, rinse, or soak the controllers.
• Do not place any of the components on a dishwasher or washing machine.
• Make sure the straps are securely fastened before use.
• Try to prevent dropping the object, hitting other things, or colliding with hard surfaces

MAINTENANCE AND USE

The VR Controller requires regular maintenance to keep it in optimum condition. We recommend that you remove the strap and wipe everything clean using a soft cloth or cotton swab to prevent dirt buildup. Do not use soap, detergent, or harsh cleaning agents. Avoid using alcohol-based cleaning agents.

LEGALESE

COPYRIGHT AND INTELLECTUAL PROPERTY INFORMATION

©2023 Razer Inc. All rights reserved. Razer, the triple-headed snake logo, Razer logo, and “For Gamers. By Gamers.” are trademarks or registered trademarks of Razer Inc. and/or affiliated companies in the United States and other countries. Actual products may differ from pictures. All other trademarks are the property of their respective owners. Warranty not valid outside product’s intended region.

Copyright© Varjo 2023. All rights reserved

Razer Inc. (“Razer”) may have copyrights, trademarks, trade secrets, patents, patent applications, or other intellectual property rights (whether registered or unregistered) concerning the product in this guide. Furnishing of this guide does not give you a license to any such copyright, trademark, patent or other intellectual property right. The VR Controller (the “Product”) may differ from pictures whether on packaging or otherwise. Razer assumes no responsibility for such differences for any errors that may appear. Information contained herein is subject to change without notice.

LIMITED PRODUCT WARRANTY

For the latest and current terms of the Limited Product Warranty, please visit varjo.com/warranty.

LIMITATION OF LIABILITY

Razer shall in no event be liable for any lost profits, loss of information or data, special, incidental, indirect, punitive or consequential or incidental damages, arising in any way out of distribution of,sale of, resale of, use of, or inability to use the Product. In no event shall Razer’s liability exceed the retail purchase price of the Product

GENERAL

These terms shall be governed by and construed under the laws of the jurisdiction in which the Product was purchased. If any term herein is held to be invalid or unenforceable, then such term (in so far as it is invalid or unenforceable} shall be given no effect and deemed to be excluded without invalidating any of the remaining terms. Razer reserves the right to amend any term at any time without notice.

Regulatory Information USA

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and consider removing the no- collocation statement

FCC Radiation Exposure Statement

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated by provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least O cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and consider removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Canada
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 0 centimeters between the radiator and your body.

USA SAR
The SAR limit of USA (FCC} is 1.6 watt/kg (W/kg} averaged over one gram of tissue. This device has also been tested against this SAR limit.

Canada SAR
The SAR limit of Canada (ISED) is 1.6 watt/kg (W/kg) averaged over one gram of tissue. This device has also been tested against this SAR limit.

STATEMENT OF COMPLIANCE WITH EU DIRECTIVE

STATEMENT OF COMPLIANCE WITH EU DIRECTIVE Hereby, Razer (Europe) GmbH, declares that this VR Controller (Models: RZ06-0501 DL & RZ06- 05010R) complies with the essential requirements and other relevant provisions of Directive 2014/53/EU and 2015/863/EU,

EU PRODUCT AND BATTERY DISPOSAL INFORMATION

BATTERY INFO

• Risk of fire or explosion or defeat of the safeguard of equipment if the battery is replaced by an incorrect type. Replace only with the same or equivalent type. Disposal I of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
• High or low extreme temperatures or low air pressure at high altitudes that the battery can be subjected to during use, storage or transportation.
• Leaving the battery in an extremely high temperature and/or low air pressure surrounding the environment can result in an explosion or the leakage of flammable liquid or gas.

BATTERY WARNING

The VR Controllers contain Li-ion rechargeable batteries, In general, the life expectancy of such butteries is dependent upon usage. If you suspect that the Li-ion reach. credible battery inside Wireless earphones and charging case may be drained {has a low charge), try charging it. Caution: Do not open, mutilate, or expose to conducting materials (metal), moisture, liquid, fire, or heat, Doing so may cause batteries to leak or explode. resulting in personal injury. Do not leave the rechargeable batteries discharged or unused for extended periods, Battery life varies with usage

• Replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types);
• Disposal of a battery into fire or hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
• Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or leakage of flammable liquid or gas;
• A battery subjected to extremely low air pressure may result in an explosion or leakage of flammable liquid or gas.

VR Controller (Left):

• Radio Frequency: 2.4GHz SRO
• Operating Frequency: 2402-2480MHz
• Output power: <BdBm

VR Controller (Right):

• Radio Frequency: 2.4GHz
• Operating Frequency: 2402-2480MHz
• Output power: <BdBm

References

• Razer United States | For Gamers. By Gamers.
• Varjo Support
• Warranty – Varjo.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>