dji Avata Battery Charging Hub User Guide
- June 12, 2024
- DJi
Table of Contents
Battery Charging Hub
User Guide
Parts
- Battery Ports
- Status LED
- Power Port (USB-C)
Disclaimer
Carefully read this entire document and all safety and compliance guidelines
provided before use.
Warnings
-
When using the charging hub to charge the Intelligent Flight Batteries, it is recommended to use the DJI 65W Portable Charger or a USB Power Delivery charger
-
The charging hub is only compatible with the BWX1692420-i4 76 Intelligent Flight Battery.
DO NOT use the charging hub with other battery models -
Place the charging hub on a flat and sturdy surface when in use Make sure the device is properly insulated to prevent fire hazards.
-
DO NOT cover the battery or charging hub when charging Otherwise. heat d1ss1pation will be affected
-
DO NOT touch the metal terminals on the charging hub.
-
If there is any noticeable buildup on the metal terminals, clean with a dry cloth
Usage
When used with a compatible charger, the DJI AVATAT” Battery Charging Hub can charge up to tour Intelligent Flight Batteries 1n sequence lrom a high lo low power level.
-
As shown in the figure, insert the battery into the battery port on the charging hub and connect the charging hub to a power outlet (100-240V, 50/60 Hz) using a compatible charger The figure uses the DJI 65W Portable Charger as
an example. -
The charging hub will first charge the batteries in sequel’s from a high to low power level until all the batteries inserted have a power level of 94% The batteries will then be fully charged in sequence The LED indicator on the charging hub will display the status (see table below). The battery level LEDs will indicate the amount of charge in the battery.
-
The battery can be disconnected from the charging hub when charging is complete.
Status LED Descriptions
| LED Indicator | Description |
|---|---|
| Solid yellow | No battery attached |
| Pulses green | Charging |
| Solid green | All batteries are fully charged |
| Blinks yellow | Temperature of batteries too low or too high (no further |
operation needed)
Solid red| Power supply or battery error (unplug and plug the batteries or
charger to resume charging)
Specifications
| Model | CHX169-80 |
|---|---|
| Supported OJI Battery | BWX169-2420-14 76 |
| Supported Charger | DJI 65W Portable Charger, OJI 65W Car Charger, or other USB |
Power Delivery chargers
Operating Temperature| 5° to 40° C (41° to 104° F)
Input| 5-20 V, max 5 A
Charging Time (Single Battery)’| Charge to 94% power approx. 38 min Fully
charged: approx 48 min
- Charging time was tested using the DJI 65W Portable Charger in a lab environment and should be taken as reference only
Compliance Information
FCC Compliance Statement Supplies Decillion A Conformity
Product name: DUI Ayala Battery Chenard Hub
Model Number: CHX 169-80
Responsible Party. DIJ Technology It
Responsible Party Address 201 S Victory Burbank, CA 91502
Website: www.dij.com
WE ARE HERE FOR YOU
Contact DJI SU PPORT
and OJI AVATA are trademarks of OJI.
Copyright © 2022 OJI All Rights Reserved.
References
- Parked Domain name on Hostinger DNS system
- ii.com: Welcome to Infinite Ink
- d11.com/euro
- Accueil du site www.dj
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>