BOOMPODS bassline Hush Earbuds User Manual
- June 12, 2024
- Boompods
Table of Contents
BOOMPODS bassline Hush Earbuds
IN THE BOX
How to Connect
Note: once you have followed this procedure, the next time you remove them from the charging case earbuds will connect to your phone automatically.
Connect more
witching between 2 devices place earbuds into the case, and press the button
on the case until you see the LED blink white. now you can connect to a second
device.
Note: you cannot the same time
Touch Controls
Your earbuds come pre-set as below but you can customize them to how you want through the BOOMTUNE APP
Charging
To check Bud’s battery status at any time you can open the Boompods App.
Charge Earbuds
Charge Case
FACTORY RESET
In the unlikely case of any pairing problem
Place earbuds into charging case and press the button for approximately 15
seconds or until both earbuds blink: red 5 limes
Further, enhance your experience by downloading the Boompods “BOOMTUNE” App, and going to the App Store. https://WWW.boompods.com/producl/bassllneHUSH Hereby, Boompods declares. [Earrphone11withBluelooth] ncornpUonce with directive 2014/53/EU.FCC IO: RDR-SH20Tl3A
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>