sasa WM-422 Flashing LED Wireless Headphones Instruction Manual
- June 12, 2024
- sasa
Table of Contents
sasa WM-422 Flashing LED Wireless Headphones
Product Description
The Sasa Tech Flashing LED Wireless Headphones are wireless headphones which
integrate FM, Bluetooth, and wired headphone functions together.
This headphone’s power is Class II, supporting headset, handsfree, function
A2DRCP agreement and headphone itself has a built-in battery.
Product Information
- A2DP lets you enjoy wireless stereo music.
- Handsfree calling: receive or dial phone calls: music will play again automatically a few seconds after the call ends
- Besides wireless stereo Bluetooth and hands-free function, you can use this headphone on any PC which supports Bluetooth.
- The headphone supports TF card, which has a capacity of up to 32G at most. Download music to TF card, and insert the card into headphones, then you can enjoy MP3 music, which will be played automatically.
- With wired Function: Link the 3.5mm jack with PC or other media audio system, it then it becomes a wired headphone.
- LED Light Function: After power is turned on LED lights will go on when music is played. The light will flash witt the music.
- Built-in mic allows vou to talk hands-free.
Specifications
- Bluetooth: V5.1
- Bluetooth Profile: A2DP/AVRCP/HFP
- Sensitivity: 95 +/-3dB
- Frequency Rate: 2.402GHZ-2.480GHZ
- Working Time: 4 Hours
- Charge Time: 2-3 Hours
- RF Range: Up to 33 Feet
- 3.5mm line-in to work without battery
- USB cable length: 30cm
- AUX cable length: 50cm
Fundamental Operations
Function:
- Turn-on: Push power switch to “ON”, then search for headphones in your phones Bluetooth settings
- Turn-off: Push the power switch to “OFF” to turn off headphone.
- Play/Pause: Short press mode/play/pause/ phone” button to pause and play music.
- Playing previous song: Press the ” Volume – /last song/ led switch” while playing .
- Playing next song: Press the “Volume +/next song” while playing
- Volume+: press and hold “Volume +/next song” to increase volume.
- Volume-: press and hold “Volume-/last song/ switch” to decrease volume.
TF Card Function:
Insert TF card or long press “mode/play/pause/ phone” to shift to TF card
function, then the headphone will start to play TF card music: the blue LED
will flash slowly, after a while the LED lights will change colors to the
music.
FM Function:
FM Function: after headphones turn-on, long press “mode/play/pause/phone”
button to switch to FM radio mode, short press this button to search the
radio.
*(Same operations for MP3 mode).
Bluetooth Function:
-
Bluetooth Function: switch to the “ON” for Bluetooth mode. If current state is TF card or FM, long press “mode/play/pause/phone” button to switch to Bluetooth mode. If headphones are plugged in, unplug the wire to switch to Bluetooth mode.
-
Bluetooth pairing: when under the Bluetooth mode, Headset will automatically search other BT devices for pairing, the indicator light will flash blue.
-
When Bluetooth connects successfully, the light will be solid blue. Now you can play music or make phone calls.
-
Answer a call: short press “mode/play/pause phone” button to answer the phone.
-
Hang up or reject calls: to hang up after a call, short press “mode/play/pause/phone” button.
To reject an incoming call, double press “mode/play/pause/phone.” -
Callback: when in Bluetooth mode, double press mode/play/pause/phone” button to call back the last dialed number.
-
Volume +: When in call or playing music, long press “Volume+/next song” button for two seconds, the volume will increase step by step.
When at the max volume, will hear “Do~~” -
Volume -: When in call or playing music, long press “Volume-/last song/ LED switch,” the volume will decrease step by step.
When at the minimum volume, will hear “Do~~” -
Previous song: when playing music, press “Volume-/previous song” button to go back to previous song
-
Next Song: when playing music, press “Volume+/next song” button to go forward to next song
-
Play/pause: When playing music, press “model play /pause/phone” button to play or pause
Line-In input function:
This headset not only has MP3 and wireless Bluetooth, but also can be used
like a wired headset. You just need a standard audio cable with 3.5mm jack to
connect headphone to audio device.
Bluetooth Pairing
- Confirm the headset is in Bluetooth mode. Indicator light will flash blue.
- Refer to your own mobile phone user manual, use your mobile phone’s Bluetooth to search for this Bluetooth headset.
- The headphone pairing name is: “Sasa Tech LED Headphone”, select it, and press “yes” or “confirm” button and then finish Bluetooth pairing.
- After successfully pairing the Bluetooth headphones one time, you will not need to pair again. They will pair automatically the next time you turn them on.
Package Contents
- (1) Flashing LED Wireless Headphones
- (1) User Manual
- (1) Micro USB Charging Cable
- (1) Aux Cable
Charging
- When charging, the indicator light will be red. After charging has finished the indicator light will turn off.
- Charging time may take 2 – 3 hours. When fully charged, the red light will turn off.
FCC
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance cm between the radiator and your body.
© 2023 SASA Tech is a trademark, Registered in the U.S. The illustrated
product and specifications may differ slightly from that supplied. All other
trademarks and trade names are those of their respective owners. United States
and international patent pending. All Rights Reserved. For ages 12+up. This is
not a toy. For warranty information please visit
www.sasausa.com.
Manufactured in China. Limited One Year Warranty. The Bluetooth® word mark and
logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by “Sasa Tech” is under license. Other trademarks and trade names
are those of their respective owners.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>