sasa IPLEDBTHP-BKW Flashing LED Wireless Headphones Instruction Manual

SASA IPLEDBTHP-BKW
Flashing LED Wireless Headphones
Instruction Manual

PLEASE READ THE INSTRUCTIONS CAREFULLY & RETAIN THEM FOR FUTURE USE

Product Description

The Sasa Tech Hashing LED Wireless Headphones are wireless headphones that integrate FM, Bluetooth, and wired headphone functions together.
This headphone’s power is Class II, supporting headset, handsfree, function A2DRCP agreement and the headphone itself has a built-in battery.

Product Information

1. A2DP lets you enjoy wireless stereo music.
2. Handsfree calling: receive or dial phone calls: music will play again automatically a few seconds after the call ends
3. Besides wireless stereo Bluetooth and hands-free function, you can use these headphones on any PC which supports Bluetooth.
4. The headphone supports TF card, which has a capacity of up to 32G at most. Download music to the TF card, and insert the card into headphones, then you can enjoy MP3 music, which will be played automatically.
5. With wired Function: Link the 3.5mm jack with a PC or other media audio system, then it becomes a wired headphone.
6. LED Light Function: After power is turned on LED, lights will go on when music is played. The light will flash with the music.
7. The built-in mic allows you to talk hands-free.

Specifications

Bluetooth: V5.0+EDR
Bluetooth Profile: A2DP/AVRCP/HFP
Sensitivity: 95 +/-3dB
Frequency Rate: 2.402GHZ-2.480HZ
Working Time: 4 Hours
Charge Time: 2-3 Hours
RF Range: Up to 33 Feet 3.5mm line-in to work without battery
USB cable length: 48cm
AUX cable length: 100cm

Fundamental Operations

Function:

1. Turn-on: Push the power switch to “ON”, then search for headphones in your phone’s Bluetooth settings
2. Turn-off: Push the power switch to “OFF” to turn off the headphones.
3. Play/Pause:Short press”mode/play/pause/ phone” button to pause and play music.
4. Playing the previous song: Press the” Volume -/last song/ led switch” while playing.
5. Playing next song: Press the “Volume +/next song” while playing
6. Volume+: press and hold “Volume +/next song” to increase volume.
7. Volume-: press and hold “Volume-/last song/ switch” to decrease volume.

TF Card Function:
Insert TF card or long-press “mode/play/pause/ phone” to shift to TF card function, then the headphone will start to play TF card music: the blue LED will flash slowly, after a while the LED lights will change colors to the music.
FM Function:
FM Function: after headphones turn on, long-press the “mode/play/pause/phone” button to switch to FM radio mode, short press this button to search the radio.
*(Same operations for MP3 mode).
Bluetooth Function:

1. Bluetooth Function: switch to the “ON” for Bluetooth mode. If the current state is TF card or FM, long-press the” mode/play/pause/phone” button to switch to Bluetooth mode. If headphones are plugged in, unplug the wire to switch to Bluetooth mode.
2. Bluetooth pairing: when under the Bluetooth mode, Headset will automatically search other BT devices for pairing, and the indicator light will flash blue and red.
3. When Bluetooth connects successfully, the blue light will flash slowly. Now you can play music or make phone calls.
4. Answer a call: short press the “mode/play/pause phone” button to answer the phone.
5. Hang up or reject calls: to hang up after a call, short press the “mode/play/pause/phone” button. To reject an incoming call, press and hold “mode/play/pause/phone.”
6. Callback: when in Bluetooth mode, double press the “mode/play/pause/phone” button to call back the last dialed number.
7. Volume +: When in call or playing music, long-press the “Volume+/next song” button for two seconds, the volume will increase step by step. When at the max volume, will hear “Do—”
8. Volume -: When in call or playing music, long press “Volume-/last song/ LED switch,” and the volume will decrease step by step. When at the minimum volume, will hear “Do–“
9. Previous song: when playing music, press the “Volume-/previous song” button to go back to the previous song
10. Next Song: when playing music, press the “Volume+/next song” button to go forward to the next song
11. Play/pause: When playing music, press the “mode/ play /pause/phone button to play or pause

Line-In input function: This headset not only has MP3 and wireless Bluetooth but also can be used as a wired headset. You just need a standard audio cable with a 3.5mm jack to connect headphones to the audio device.

Bluetooth Pairing

1. Confirm the headset is in Bluetooth mode. The indicator light will flash blue and red alternately.
2. Refer to your own mobile phone user manual, use your mobile phone’s Bluetooth to search for this Bluetooth headset.
3. The headphone pairing name is: “Sasa Tech LED Headphone”, select it, press the “yes” or “confirm” button, and then finish Bluetooth pairing.
4. After successfully pairing the Bluetooth headphones one time, you will not need to pair them again. They will pair automatically the next time you turn them on.

Package Contents

1. Flashing LED Wireless Headphones
2. User Manual
3. Micro USB Charging Cable
4. Aux Cable

Charging

When charging, the indicator light will be red. After charging has finished the indicator light will turn off. Charging time may take 2 – 3 hours. When fully charged, the red light will turn off.

FCC
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirements.
© 2022 SASA Tech is a trademark, registered in the U.S. The illustrated product and specifications may differ slightly from that supplied. All other trademarks and trade names are those of their respective owners. The United States and international patent pending. All Rights Reserved. For ages 12+up. This is not a toy. For warranty information please visit www.sasausa.com. Manufactured in China. Limited One Year Warranty.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by “Sasa Tech” is under license. Other trademarks and trade names are those of their respective owners.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>