Euromaid EFD474S 474L French Door Fridge Freezer User Manual

Euromaid EFD474S 474L French Door Fridge Freezer

Product Information

Contents

• OPERATION
• Display
• Operating Instructions
• BASIC TROUBLESHOOTING
• SPECIFICATIONS
• MANUFACTURER GUARANTEE

Safety and Warnings
Thank you for buying this Euromaidan product. Please read all safety instructions before using your fridge or freezer. Read this manual thoroughly before first use, even if you are familiar with this type of product. The safety precautions enclosed herein reduce the risk of fire, electric shock and injury when correctly adhered to. Make sure you understand all instructions and warnings. Always follow basic safety precautions and accident prevention measures when using an electrical appliance, including the following:

• Pay particular attention to messages that contain the words DANGER, WARNING or CAUTION. These words are used to alert you to a potential hazard that can seriously injure you and others. The instructions will tell you how to reduce the chance of injury and let you know what can happen if the instructions are not followed.
• The refrigerant isobutane (R600a) is contained within the refrigerant circuit of the appliance, a gas with a high level of environmental compatibility, which is nevertheless flammable. During transportation and installation of the appliance, ensure that none of the components of the refrigerant circuit become damaged.
• Do not damage the refrigerant circuit. Never use an appliance with a damaged refrigerant circuit. If the refrigerant circuit becomes damaged, avoid proximity to open fires and all types of heat and ignition sources. Thoroughly ventilate the room in which the appliance is located.
• It is hazardous for anyone other than an authorized service person to service this appliance. In Queensland, the authorized service person MUST hold a Gas Work Authorization for hydrocarbon refrigerants to carry out servicing or repairs which involve the removal of covers.

Usage Conditions and Restrictions
This appliance is only intended for use within a domestic environment only. If the supply cord is damaged, it must be replaced by Glen Dimplex or an authorized service agent on Glen Dimplex’s behalf in order to avoid a hazard. Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance. The appliance must be unplugged after use and before carrying out user maintenance on the appliance.

SAFETY AND WARNINGS

Thank you for buying this Euromaid product. Please read all safety instructions before using your fridge or freezer.

• Read this manual thoroughly before first use, even if you are familiar with this type of product. The safety precautions enclosed herein reduce the risk of fire, electric shock and injury when correctly adhered to.
• Make sure you understand all instructions and warnings.
• Always follow basic safety precautions and accident prevention measures when using an electrical appliance, including the following:
• IMPORTANT: Pay particular attention to messages that contain the words DANGER, WARNING or CAUTION. These words are used to alert you to a potential hazard that can seriously injure you and others. The instructions will tell you how to reduce the chance of injury and let you know what can happen if the instructions are not followed.
• The refrigerant isobutane (R600a) is contained within the refrigerant circuit of the appliance, a gas with a high level of environmental compatibility, which is nevertheless flammable. During transportation and installation of the appliance, ensure that none of the components of the refrigerant circuit become damaged.
• WARNING: Do not damage the refrigerant circuit. Never use an appliance with a damaged refrigerant circuit. If the refrigerant circuit becomes damaged, avoid proximity to open fires and all types of heat and ignition sources. Thoroughly ventilate the room in which the appliance is located.
• DANGER: It is hazardous for anyone other than an authorized service person to service this appliance. In Queensland, the authorized service person MUST hold a Gas Work Authorization for hydrocarbon refrigerants to carry out servicing or repairs which involve the removal of covers.

Usage Conditions and Restrictions

• This appliance is only intended for use within a domestic environment only.
• If the supply cord is damaged, it must be replaced by Glen Dimplex or an authorized service agent on Glen Dimplex’s behalf in order to avoid a hazard.
• Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
• The appliance must be unplugged after use and before carrying out user maintenance on the appliance.
• WARNING: Keep ventilation openings in the appliance enclosure or in the built-in structure clear of obstruction.
• WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
• WARNING: Do not damage the refrigerant circuit.
• WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
• WARNING: When positioning the appliance, ensure the power cord is not trapped or damaged.
• WARNING: Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance.
• Do not use extension cords or power boards.
• This appliance is designed to be standing only and should not be recessed.

Electrical Safety

• Before connecting and turning on the appliance, ensure the electrical voltage and circuit frequency correspond to that indicated on the appliance rating label.
• This appliance should be properly earthed for your safety. The power cord of this appliance is equipped with a three-prong plug for use in standard wall outlets to minimise the possibility of electrical shock. Do not modify the cord and/or plug provided with the appliance. Improper use of the earthed plug can result in the risk of electric shock.
• This appliance requires a standard 220-240V AC 50Hz electrical outlet. Do not overload the electrical circuit.
• Do not kink or damage the power cord; do not leave it exposed or dangling. Secure it at the back of the appliance so no one steps on or places anything on the cord or against it. Keep the cord out of reach of children. When moving the appliance, make sure not to damage the power cord.
• Do not use an inverter, adaptor or extension cord with this appliance. If the cord is too short, have a qualified electrician install an outlet near the appliance. Use of an extension cord and an inverter can negatively affect the performance of the unit.
• To protect against the risk of electric shock, do not immerse the unit, cord or plug in water or spray it with any other liquid. Do not connect or disconnect the electric plug when your hands are wet. Turn the power switch off before removing the plug from the socket.
• WARNING: To reduce the risk of fire, electric shock or personal injury, always unplug the appliance from the socket when not in use, when moving and before cleaning or servicing. Never unplug the unit by pulling the power cord. Always grip the plug firmly and pull straight out from the power point.

Children

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.

Unpacking

• During transportation, protective packaging was used to protect the appliance against any damage. After unpacking, please dispose of all elements of packaging in a way that will not cause damage to the environment.
• CAUTION: During unpacking, the packaging materials (polythene bags, polystyrene pieces, etc.) should be kept out of reach of children.
• This appliance is heavy, take care when moving it. To avoid back or other injury, consider a two person lift or mechanical aid when installing it.
• When unpacking, check the appliance carefully for damage. If it is damaged, do not install the appliance

Risk of Fire

• If the refrigerant circuit should become damaged. Avoid open flames and sources of ignition. Disconnect the appliance from the mains power. Thoroughly ventilate the room in which the appliance is situated for several minutes.

Disposal

• Old appliances should not simply be disposed of with normal household waste, but should be delivered to a collection and recycling centre for electric and electronic equipment. A symbol shown on the product, the instruction manual or the packaging shows that it is suitable for recycling.
• Materials used inside the appliance are recyclable and are labelled with information concerning this. By recycling materials or other parts from used devices you are making a significant contribution to the protection of our environment.
• Information on appropriate disposal centres for used devices can be provided by your local authority

PRODUCT OVERVIEW

Dimensions

Key Components

1. LED Light
2. Door Shelves
3. Glass Shelves
4. Flexible Zone
5. Vegetable Crisper
6. Freezer Draws

Control Panel

LCD Screen Icons

1. Refrigerator Selection
2. Freezer Selection
3. Super Cool / Super Freezing
4. Temperature Indicator
5. Flexible Zone – Vegetables & Fruit (6°)
6. Flexible Zone – Meat (-1°)
7. Flexible Zone – Drinks (2°)

Control Buttons

• Temperature Increase
• Temperature Decrease
• Flexible Zone Control
• Fridge / Freezer Zone Selection
• Super Cool / Super Freezing Mode
• Lock / Unlock Button

INSTALLATION

Selecting a Suitable Location
When selecting a position for your unit, ensure the floor is flat and firm, and the room is well ventilated. Avoid placing your unit near a heat source (i.e., oven, radiator, or hot water system). Avoid direct sunlight as it may increase the electrical consumption. Extreme cold temperatures may also cause the unit to not perform correctly. This unit is not designed for use in a garage or outdoors. Do not drape the unit with any covering.
When installing the unit, ensure that 10cm of free space is allowed to the left, right and rear of the unit, and 30cm at the top. This will allow cold air to circulate around the unit and improve the efficiency of the cooling process.

Door Space Requirements

The unit’s door must be able to open fully as pictured in Figure 1a.

Levelling the Unit
To level the unit, adjust the two feet at the front of the unit – turning clockwise to extend and counter- clockwise to reduce as shown in Figure 1b.
If the unit is not level, the door and magnetic seal alignments will not be covered properly, leading to inefficient refrigeration performance
Ensure that the feet all touch the ground before use.

FIRST TIME USE

Power Source and Grounding
It’s recommended to use the fridge on its own dedicated power outlet for both convenience and safety. The power outlet must be grounded.
Important! If the supply cord is damaged, cease use and ensure the appliance is completely disconnected from the power supply.
The power cord must be replaced by Glen Dimplex or an authorized service agent on Glen Dimplex’s behalf before it is reconnected.

Cleaning Before Use
Wipe the inside of the unit with a weak solution of bicarbonate soda, then rinse with warm water using a soft fiber cloth or sponge. Wash the shelves and drawers in warm soapy water and dry completely before replacing in the unit. Clean the exterior of the unit with a damp cloth. Further cleaning instructions and tips can be found on page 14.

Before Using your Appliance

• You must wait at least two hours after moving the unit, before turning the appliance on.
• Do not use when the power cord is damaged or the plug is worn.
• Do not alter the power cord under any circumstances, so as to ensure safe use.
• Do not put flammable, explosive, volatile and highly corrosive items in the refrigerator to prevent damages to the product or fire accidents.
• Do not place flammable items near the refrigerator to avoid fires.
• This product is a household refrigerator and is only suitable for the storage of foods.
• According to national standards, household refrigerators shall not be used for other purposes, such as storage of blood, drugs or biological products.
• Before placing any food in your unit, turn it on and wait for 24 hours, to make sure it is working properly and to allow it time to fall to the correct temperature. Your unit should not be overfilled.
•  To remove any excess odour, place a small container of Bi-Carb soda on the middle shelf of the fridge towards the back for 24 hours.
• Important! Before plugging in your fridge, you must check that you have a power outlet which is compatible with the plug supplied on the appliance lead.

Noise from the Fridge
You may notice that your fridge makes some unusual noises. This is completely normal for refrigerators and freezers, and the noises are caused by the circulation of the refrigerant liquid within the cooling system.

Tips for Keeping Food within the Fridge

• Cooked meats & fish should always be stored on a shelf above raw meat/fish to avoid bacterial transfer. Keep raw meat/fish in a container which is large enough to collect juices and cover properly, placing the container onto the lowest shelf.
• Leave space around your food to allow air to circulate inside the unit.
• Ensure all parts of the appliance are kept cool.
• To prevent transfer of flavours and drying out, pack or cover the food separately. Fruit and vegetables do not need to be wrapped.
• Always let pre-cooked food cool down before you place into the fridge. This will help to maintain the internal temperature of the fridge.
• To prevent cold air from escaping the fridge, try to limit the number of times you open the door.

OPERATION

Display

When the unit is first powered on, the display will light up and the start-up tone rings, and then after 3 seconds the panel will display return to normal operation. When first powered on, default temperatures of refrigerating and freezing chambers are 4°C and -18°C, respectively.
During the first power-on, if the ambient temperature is above 38°C, it is recommended that the unit be set to 2°C refrigeration and -16°C freezing for fast and balanced cooling.
If an error occurs, the fault code will display instead of temperature, fault codes are referenced on pg.13.
Under normal circumstances, if the panel is not touched and the door isn’t opened, then the display will be locked.

Operating Instructions

1. Setting the Temperature of the Refrigerator
   When control panel is unlocked, press the TEMP. SELECT (B) button to select the refrigerator zone, the REF. (1) icon will light up on the on the LCD screen. Once selected, press UP (A) or DOWN (C) to adjust the temperature.
   The range of temperature available is 2°C ~ 8°C.

2. Setting the Temperature of the Freezer
   When control panel is unlocked, press the TEMP. SELECT (B) button to select the freezer zone, the FRZ. (2) icon will light up on the on the LCD screen. Once selected, press UP (A) or DOWN (C) to adjust the temperature.
   The range of temperature available is -24°C ~ -16°C.

3. Setting the Temperature of the Flexible Zone
   Press the VARIO. TEMP (E) button to change temperature of the flexible zone. Pressing the button repeatedly will cycle the temperature between 6° (Vegetables & Fruit), 2° (Drinks) and -1° (Meat).

4. Pre-Set Programmes
   To engage the pre-set programmes, whilst the control panel is unlocked, press the SUPER COOL/SUPER FRZ. (D) button to cycle through the following options:

5. Super Cool – Sets the temperature of the refrigerator to 2°. The program will run for 6 hours and then the refrigerator will return to the previously set temperature.

6. Super Freeze – Sets the temperature of the freezer to -24°. The program will run for 32 hours and then the freezer will return to the previously set temperature.
   The recommended temperature setting of the fridge is 4° and -18° for the freezer.

7. Sabbath Mode
   To engage the sabbath mode, unlock the control panel and press the DOWN (C) and UNLOCK (F) buttons at the same time for 4 seconds. Press any button to exit this mode. The following actions occur during sabbath mode

8. Control panel, lights and alarm is muted.

9. The fridge and freezer cool normally.

10. Opening Warning and Door Open Alarm Mute
    When the refrigerator door is opened a musical tone will be heard. When the door remains open for longer than two minutes, an alarm will sound once every minute until the door is closed.
    Press any button on the control panel to mute the alarm.

11. Muting the Door Opening Sound
    Whenever the refrigerator door is opened, a musical tone will sound. This can be turned off by performing the following procedure.

12. First unlock the control panel by pressing and holding the LOCK (F) button for 3 seconds.

13. Once the control panel is unlocked, hold and the UP (A) and DOWN (C) button for 3 seconds.

14. To turn the musical tone back on, repeat steps 7.1 and 7.2.

15. List of Fault Codes
    The following warnings appearing on the display indicate corresponding faults of the refrigerator. Although the refrigerator may still have cold storage function with the following faults, it is advised to contact Glen Dimplex for maintenance, so to ensure optimized operation of the appliance.

CLEANING AND MAINTENANCE

sensor failure of freezing chamber
E3| Temperature sensor failure of variable temperature chamber| E4| Failure of defrosting sensor in refrigerating chamber
E5| Freezing defrost sensor detection circuit error| E6| Communication error
E7| Circulation of temperature detection circuit error| EH| Moisture sensor error

WARNING! To avoid an electric shock, always unplug your fridge before cleaning.

Cleaning your Appliance

• Caution: Before using any cleaning products, please read and follow the manufacturer’s instructions and warnings to avoid any damage to your fridge or personal injury.
• Upon installation of your new appliance, it is recommended that it be cleaned thoroughly.
• Wash the inside with a damp warm cloth containing a water and baking soda solution.
• The solution should be about 2 tablespoons of baking soda to 2L of water.
• Wash the storage basket with a mild detergent solution.
• Be sure to keep the door seal clean to keep the unit running efficiently.
• The outside of the fridge should be cleaned with mild detergent and warm water.
• Dry the interior and exterior with a soft cloth.
• The condenser coils should be carefully vacuumed when they are dusty or dirty.
• Clean your door gasket seals every 3 months using the same warm water solution described above.

Removal of the Door Shelves
According to the direction arrow in the figure 1c, use both hands to squeeze the tray, and push it upward, then it can be removed for cleaning.

Care When Handling / Moving Your Unit
Hold the unit around its sides or base when moving it. Under no circumstances should it be lifted or moved by holding the doors or hinges.

Servicing
The unit should be serviced by an authorised technician and only genuine spare parts should be used. Under no circumstances should you attempt to repair the unit yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunction. Contact Glen Dimplex for all service and fault related enquiries.

LED Replacement
The LED light in this product needs to be replaced by an authorised service person, in the instance of a failure, please contact Glen Dimplex to lodge a service call.

Normal Operation

• The refrigerator enclosure may emit heat during operation specially in summer, this is caused by the radiation of the condenser, and it is a normal phenomenon.
• Condensation phenomenon will be detected on the exterior surface and door seals of the refrigerator when the ambient humidity is large. This is a normal phenomenon, and the condensation can be wiped away with a dry towel.
• A buzzing noise may be heard when the compressor is running, especially when starting up or shutting down.

Tips for Energy Saving

•  Try not to open the door too often, especially when the weather is wet and hot. Once you open the door, close it as soon as possible.
• Every now and then check if the appliance is sufficiently ventilated (adequate air circulation behind the appliance).
• Before loading the appliance with packages of fresh food, make sure they are cooled to ambient temperature.
• If it is the outer condenser, the rear wall should be always clean free of dust or any impurities.
• The appliance should be located in the coolest area of the room, away from heat producing appliances or heating ducts, and out of the direct sunlight.
• Let hot foods cool to room temperature before placing in the appliance. Overloading the appliance forces the compressor to run longer. Foods that freeze too slowly may lose quality, or spoil.
• Be sure to wrap foods properly, and wipe containers dry before placing them in the appliance. This cuts down on frost build-up inside the appliance.
• Appliance storage bin should not be lined with aluminium foil, wax paper, or paper towel. Liners interfere with cold air circulation, making the appliance less efficient.
• Organise and label food to reduce door openings and extended searches. Remove as many items as needed at one time, and close the door as soon as possible.

BASIC TROUBLESHOOTING

Fridge isn’t operating|

• Check that the fridge is plugged in and connected to power.
• **** Check whether voltage is too low.
• **** Check that a fuse hasn’t blown or circuit tripped.

---|---
Fridge is making strange odour|

• Odourous foods should be tightly wrapped and sealed in containers.
• Ensure that the interior is clean. Refer to cleaning instructions.

Fridge compressor is continuously running|

• It is normal for the fridge compressor to operate for longer periods of time when the ambient temperature is higher (i.e. Summer).
• Do not put too much food in the fridge at one time.
• Do not put warm/hot foods into the fridge.
• Try to minimize the frequency of the door opening.

Illuminating light does not work|

• Ensure the fridge is connected to power.
• Check that the globe hasn’t blown.

The fridge door doesn’t close properly|

• Ensure that food isn’t preventing the door from closing.
• Ensure that the fridge is completely level and feet adjusted to touch the floor.
• Ensure the fridge door gaskets/seals are clean.

The fridge is making loud noises|

• It’s normal for the fridge to make noises when refrigerant coolant is being circulated.
• Check that the fridge is correctly levelled.

SPECIFICATIONS

CAPACITY|
---|---
Total Volume| 474L
Fridge Total Volume| 300L
Freezer Total Volume| 174L
DIMENSIONS|
Boxed Dimensions (W x D x H)| 885 x 710 x 1900mm
Unit Dimensions (W x D x H)| 833 x 653 x 1775mm
Minimum Space Required| 1033 x 753 x 2075mm
Gross Weight| 100kg
Net Weight| 91kg
GENERAL|
Colour/Finish| Stainless Steel
COOLING|
Refrigerant| R600a
Fridge Temperature Range| 2°C ~ 8°C.
Freezer Temperature Range| -24°C ~ -16°C.
ELECTRICAL|
Connection| 10A Plug
Power| 220 – 240V / 50Hz
kWh Per Year| 420
Energy Rating| 3.5 Stars

MANUFACTURER GUARANTEE

This warranty is provided in Australia by Glen Dimplex Australia Pty Limited ABN 69 118 275 460 (Phone number 1300 556 816) and in New Zealand by Glen Dimplex New Zealand Limited NZBN 9429000069823 (Phone number 09 274 8265) in respect of the Euromaid product.

Euromaid Express Warranty
Subject to the exclusions below, we warrant that the product will not have any electrical or mechanical breakdowns within:

• In the case of Euromaid products used for personal, domestic or household purposes, a period of 2 years from the date the product is purchased as a brand-new product from a retailer located in Australia / New Zealand.
• In the case of Euromaid products used for purposes other than personal, domestic or household purposes (including business or commercial use), a period of 90 days from the date the product is purchased as a brand-new product from a retailer located in Australia / New Zealand. Euromaidan products are designed and intended for domestic.
• All warranty repairs must be carried out by Glen Dimplex or their nominated service agent

Note: warranty periods detailed above may vary in line with agreements with select retail and builder partners and may differ between Australia and New Zealand.
The benefits conferred by this express warranty are in addition to the Consumer Guarantees referred to in section 3 and any other statutory rights you may have under the Australian / New Zealand Consumer Law and/or other applicable laws.

Warranty Exclusions
This express warranty does not apply where:

• The product has been installed, used or operated otherwise than in accordance with the product manual or other similar documentation provided to you with the product;
• The product requires repairs due to damage resulting from accident, misuse, incorrect installation, insect or vermin infestation, improper liquid spillage, cleaning or maintenance, unauthorized modification, use on an incorrect voltage, power surges and dips, voltage supply problems, tampering or unauthorized repairs by any persons, use of defective or incompatible accessories or exposure to abnormally corrosive conditions, events independent of human control which occurred after the goods left the control of Glen Dimplex;
• The repair relates to the replacement of consumable parts such as fuses and bulbs or any other parts of the product which require routine replacement;
• You are unable to provide us with reasonable proof of purchase for the product;
• the breakdown occurs after the expiry of the express warranty period set out in section 1 or
• the product was not purchased in Australia / New Zealand as a brand-new product.

Consumer guarantees
Our goods come with guarantees that cannot be excluded under the Australian / New Zealand Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

How to make a claim
You may make a claim under this warranty through our website, contacting our customer care line or via email. Contact details for Glen Dimplex Australia and New Zealand can be found at the end of this document
To make a valid claim under this warranty, you must:

• Lodge the claim with us as soon as possible and no later than 14 days after you first become aware of the breakdown;
• Provide us with the product serial number;
• Provide us with reasonable proof of purchase for the product. This can take the form of a store receipt, new home handover form or other payment receipt documentation; and
• If required by us, provide us (or any person nominated by us) with access to the premises at which the product is located at times nominated by us (so that we can inspect the product).

Warranty Claims
If you make a valid claim under this warranty and none of the exclusions set out in section 2 apply, we will, at our election, either repair the product or replace the product with a product of identical specification (or where the product is superseded or no longer in stock, with a product of as close a specification as possible).
Goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods.
Products are designed and supplied for normal domestic use. We will not be liable to you under this warranty for business loss or damage of any kind whatsoever.

Glen Dimplex Australia Pty Ltd
www.glendimplex.com.au
Australia
Ph: 1300 556 816
customer.care.ha@glendimplex.com.au

Glen Dimplex New Zealand Ltd
www.glendimplex.co.nz
New Zealand
Ph: 09 274 8265
nztechserv@glendimplex.co.nz

READ THE INSTRUCTION BOOKLET BEFORE INSTALLING AND USING THE APPLIANCE.
The manufacturer will not be responsible for any damage to property or to persons caused by incorrect installation or improper use of the appliance.
The manufacturer is not responsible for any inaccuracies, due to printing or transcription errors, contained in this manual. In addition, the appearance of the figures reported is also purely indicative.
The manufacturer reserves the right to make changes to its products when considered necessary and useful, without affecting the essential safety and operating characteristics.
Glen Dimplex constantly seeks ways to improve the specifications and designs of their products.
Whilst every effort is made to produce up to date literature, this document should not be regarded as an infallible guide. Actual product only should be used to derive cut out sizes.
All appliances must be installed by a qualified person/s with adherence to the relevant electrical, plumbing and building codes, with compliance being issued as required by state or national legislation.
Additionally, all upright cookers must have the anti-tilt device installed correctly in adherence to the relevant standards by a licensed installer.
For maximum effectiveness and efficiency all rang hoods should be installed with the use of ductwork, by a licensed installer with adherence to the relevant state and national building codes and regulations.
All Glen Dimplex appliances are for Domestic use only, and must be installed by a license installer into Domestic Applications only, without exception and to the required Authorities guidelines. Any installation outside of this will VOID warranty. Alfresco areas are not a Domestic application.

Distributed by:
Glen Dimplex Australia Pty Ltd Glen Dimplex New Zealand Ltd www.glendimplex.com.au www.glendimplex.co.nz
For service advice, please contact the Customer Care Centre by phone or email below.

Australia
Ph: 1300 556 816
customer.care.ha@glendimplex.com.au

New Zealand
Ph: 09 274 8265 nztechserv@glendimplex.co.nz
VERSION 1 REVISION 20220928

References

• Glen Dimplex New Zealand
• Glen Dimplex New Zealand
• Glen Dimplex Australia
• Glen Dimplex Australia

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>