RunTru A4AH4E36A1C30A Submittal 3.0 Ton Convertible Air Handler Instruction Manual

June 12, 2024
RunTru

Submittal
3.0 Ton
Convertible Air Handler
A4AH4E36A1C30A

RunTru A4AH4E36A1C30A Submittal 3 0 Ton Convertible Air Handler -
Cover

September 2022
A4AH4E36A1C-SUB-1A-EN

Outline Drawing

| RunTru A4AH4E36A1C30A Submittal 3 0 Ton Convertible Air Handler - Outline
Drawing 2|
---|---|---

M I N I M UM U N I T CL EA R A NCE TABLE

| SER V I CE CLEA R A NCE
(R ECOM M E N DED )
SIDES| 2″
FRONT| 2 I”
BACK| 0″
INLET DUCT| I”
OUTLET DUCT| N / A

NOTE: THIS UNIT IS APPROVED FOR INSTALLATION CLEARANCES TO COMBUSTIBLE MATERIAL AS STATED ON THE UNIT RATING NAMEPLATE

ALL DIMENSIONS ARE REFERENCE DIMENSIONS

RunTru A4AH4E36A1C30A Submittal 3 0 Ton Convertible Air Handler - Outline
Drawing 4

PRODU CT DIMENSIONS

Air Handler Model| A| B| c| D| E| F| H| Flow Control| Gas Line Braze
A4AH4E36A 1C30A| 51.27| 23.50| 21.50| 21.75| 7.01| 9.66| 24.59| TXV| 7/8
All dimensions are in inches

Product Specifications

MODEL A4AH4E36A1C30A
RATED VOLTS/PH/HZ 208-230/ 1/60
RATINGS(a) See O.D. Specifications
INDOOR COIL -Type Plate Fin
Rows – F.P.I. 4 – 14
Face Area (sq. ft.) 4.59
Tube Size (in.) 3/8
Refrigerant Control TXV
Drain Conn. Size (in.) (b) 3/4 NPT
DUCT CONNECTIONS See Outline Drawing
INDOOR FAN – Type Centrifugal
Diameter-Width ( n.) 11X 8
No. Used 1
Drive – No. Speeds Direct – 5 Ccl
CFM vs. in. w.g. See Fan Performance Table
No. Motors – H.P. 1- 1/2
Motor Speed R.P.M. 1050
Volts/ Ph/Hz 208-230/ 1/60
F.L. Amps 4.1
FILTER
Filter Furnished? (b) No
REFRIG ERANT R-410A
Ref. Line Connections Brazed
Coupling or Conn. Size – in. Gas 7/8
Coupling or Conn. Size – in. Liq. 3/8
DIM ENSIONS H x W x D
Crated ( n.) 52-3/4 x 27-1/2 x 25-1/2
Uncrated 51-3/8 x 23-1/2 x 21-1/8
WEIGHT
Shipping (Lbs.)I Net (Lbs.) 155/ 144

(a) These Air Handlers are A.H.R.I certified with various Split System Air Conditioners and Heat Pumps (AHRI STANDARD 210/240). Refer to the Split System Outdoor Unit Product Data Guides for performance data.
(b) 3/4″ Male Plastic Pipe (Ref: ASTM 1785­76)
(c) ECM Motor
(d) Remote filter required.

Minimum Airflow CFM

A4AH4E36A1C30A

Heater| Minimum Heat Speed Tap
| With Heat Pump| Without Heat Pump
BAYHTR1504BRK, BAYHTR1504LUG,
BAYHTR1505BRK, BAYHTR1505LUG| Low| Low
BAYHTR1508BRK, BAYHTR1508LUG,
BAYHTR1510BRK, BAYHTR1510LUG| Med-High| Med-Low
BAYHTR1523BRK| Med-High| Med
BAYHTR1517BRK,BAYHTR3517LUG,
BAYHTR3510LUG| High| Med

Heater Pressure Drop Table

Airflow
CFM| Number of Racks| | Heater Racks
---|---|---|---
1| 2| 3| 4| Heater Model| No. of Racks
Air Pressure Drop -Inches W.G.| BAYHTR 1504| 1
1800| 0.02| 0.04| 0.06| 0.14| BAYHTR 1505| 1
1700| 0.02| 0.04| 0.06| 0.14| BAYHTR 1508| 2
1600| 0.02| 0.04| 0.06| 0.13| BAYHTR 1510| 2
1500| 0.02| 0.04| 0.06| 0.12| BAYHTR 1517| 3
1400| 0.02| 0.04| 0.06| 0.12| 6AYHTR3510| 3
1300| 0.02| 0.04| 0.05| 0.11| BAYHTR3517| 3
1200| 0.01| 0.04| 0.05| 0.10| BAYHTR3515| 3
1100| 0.01| 0.03| 0.05| 0.09| BAYHTR 1523| 4
1000| 0.01| 0.03| 0.04| 0.09| BAYHTR 1525| 4
900| 0.01| 0.03| 0.04| 0.08| |
800| 0.01| 0.03| | | |
700| 0.01| 0.02| | | |
600| 0.01| 0.02| | | |

Performance and Electrical Data

  1. See Product Data or Air Handler nameplate for approved combinations of Air Handlers and Heaters.
  2. Heater model numbers may have additional suffix digits.

Table 1. Air Flow Performance

A4AH4E36A1C30A

EXTERNAL STATIC
(in w.g)| A RFLOW
Speed Taps: 208 – 230 VOLTS
| High| Med-High| Med t| Med-Low| Low
0.1| 1492| 1418| 1302| 1268| 1140
0.2| 1460| 1385| 1266| 1230| 1096
0.3| 1426| 1349| 1228| 1190| 1050
0.4| 1390| 1311| 1187| 1147| 1002
0.5| 1352| 1271| 1144| 1101| 952
0.6| 1311| 1229| 1099| 1053| 899
0.7| 1269| 1184| 1051| 1003| 845
1. Values are with wet coil, no filter, and no heaters
2. CFM Correction for dry coil = Add 3%
3. † = Factory Setting
4. In downflow applications, airflow must not exceed 1600 cfm due to condensate blowoff.
5. Low = Tap 1,Med-Low = Tap 2, Med = Tap 3, Med-High= Tap 4, High = Tap 5

Table 2. Electrical Data

A4AH4E36A1C30A

Heater Model No.| No. of Circuits/ Phases| 240 Volt| 208 V
Capacity| Heater Amps per Circuit| Minimum Circuit Ampacity| Maximum Overload Protection| Capacity| Heater Amps per Circuit| Minimum Circuit Ampacity| Maximum Overload Protection
kW| BTUH| kW| BTUH
No Heater| | | | 4.1| 5| lS| | | 4.1| s| 15
BAYHTR1S04BRK BAYHTR1S04LUG| 1/ 1| 3.8| 13100| 16.0| 25| 25| 2.9| 9800| 13.8| 22| 2S
BAYHTRlSOSBRK BAYHTRlSOSLUG| 1/ 1| 4.8| 16400| 20.0| 30| 30| 3.6| 12300| 17.3| 27| 30
BAYHTR1S08BRK BAYHTR1S08LUG| 1/ 1| 7.7| 26200| 32.0| 45| 4| 5.8| 19700| 27.7| 40| 40
BAYHTRlS OBRK BAYHTRlS OLUG| 1/ 1| 9.6| 32800| 40.0| 55| 60| 7.2| 24600| 34.6| 48| 50
BAYHTR1S17BRK-
Circuit 1(a)| 2/ 1| 9.6| 32800| 40.0| 55| 60| 7.2| 24600| 34.6| 48| 50
BAYHTR1S 7BRK-
Circuit 2| 4.8| 16400| 20.0| 25| 25| 3.6| 12300| 17.3| 22| 25
BAYHTR1S23BRK-
Circuit 1(a)| 2/ 1| 9.6| 32800| 40.0| 55| 60| 7.2| 24600| 34.6| 48| 50
BAYHTR1S23BRK-
Circuit 2| 9.6| 32800| 40.0| 50| 50| 7.2| 24600| 34.6| 43| 45
BAYHTR3S 10LUG| 1/3| 9.6| 32800| 23. 1| 33| 35| 7.2| 24600| 20.0| 30| 30
BAYHTR3S 17LUG| 1/3| 14.4| 49100| 34.6| 48| so| 10.8| 36900| 30.0| 42| 45
BAYHTR1S17BRK
with single circuit power source kit BAYSPEKT201A| 1/ 1| 14.4| 49100| 60.0| 83| 90| 10.8| 36900| 51.9| 73| 80

  • = Motor Amps

(a) MCA and MOP for circuit 1 contains the motor amps.

Features and Benefits

  • Galvanized metal cabinet with captured foil face insulation
  • 2% or less air leakage
  • R-4.2 Insulating Value
  • Multi-Position UP/Down Flow, Horizontal Left /Right
  • ALL Aluminum Coil
  • Electric Heaters with polarized plug connections (sold as accessory)
  • R-410A Thermal Expansion Valve
  • ECM Motor (3..0 – 5 Ton Models)
  • Low Voltage Pigtail Connections
  • Draw Through Design
  • Horizontal Drain pan
  • Single Color
  • Fused 24V Power
  • 5 year warranty
  • Optional extended warranty availabel

Important: Condensate management kit is required for all 5 ton air handler models installed in downflow applications.

About Trane and American Standard Heating and Air Conditioning
Trane and American Standard create comfortable, energy efficient indoor environments for residential applications. For more information, please visit www.trane.com or www.americanstandardair.com.

The manufacturer has a policy of continuous data improvement and it reserves the right to change design and specifications without notice. We are committed to using environmentally conscious print practices.

A4AH4E36A1C-SUB-1A-EN 06 Sep 2022
Supersedes (New)
©2022

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals