CRYSTORAMA 130-MK Calypso Three Light Mini Chandelier Instruction Manual

CRYSTORAMA 130-MK Calypso Three Light Mini Chandelier

Product Information

The Crystorama Lighting Fixture is a high-quality and durable lighting solution designed to add elegance and style to any space. With a long-standing reputation of sixty years, Crystorama has been lighting the way with their exceptional craftsmanship and attention to detail.

The model number for this fixture is 130-MK and it can be found on the Crystorama website at crystorama.com. This fixture is designed for both hanging and ceiling installation.

Important Safety Warning: It is crucial that all electrical components of this fixture are installed by a licensed electrician in accordance with the National Electric Code and local electrical codes. Failure to do so may result in electrical danger.

This fixture is damp rated, making it suitable for use in areas with high humidity levels.

Product Part Numbers:

• A. (1)-Mounting hardware
• B. (1)-Canopy W5-7/8”xH1-1/8” #XRF130MKCAN6IN
• C. (2)-Finial #XRF130MKFIN
• D. (2)-Loop #XRF130MKLOOP
• E. (1)-Chain -L72”, 4mm thick #XRF130MKCHA4MM
• F. (1)-Metal ring
• G. (1)-Bottom basket #XRF130MKBT
• H. (3)-Socket

This product contains lead, which is known to the state of California to cause cancer and/or birth defects or reproductive harm. For more information, please visit www.P65Warnings.ca.gov.

Product Usage Instructions

Hanging Installation

1. Determine the preferred hanging height and adjust the chain accordingly.
2. Open one link of the chain and connect it to the fixture loop, then close the link.
3. Open another link of the chain and connect it to the loop of the canopy, then close the link.
4. Thread the mounting screws into the matching holes of the mounting bar and tighten with the small hex nut.
5. Secure the mounting bar to the outlet box using the outlet box screws.
6. Raise the canopy, allowing the mounting screws to protrude through the holes in the canopy, and secure with the ball nut.
7. Hang crystals on the metal ring and bottom basket, alternating between glass drop A and B.
8. Hang glass drop C at the bottom of the bottom basket.
9. Install the bulb (not included) into the socket.

Ceiling Installation

1. Loosen the hex nut of the canopy and disassemble the canopy.
2. Remove the loop on the top of the fixture.
3. Slip the canopy, metal washer, and lock washer over the nipple, then secure with the hex nut.
4. Thread the mounting screws into the matching holes of the mounting bar and tighten with the small hex nut.
5. Secure the mounting bar to the outlet box using the outlet box screws.
6. Raise the canopy, allowing the mounting screws to protrude through the holes in the canopy, and secure with the ball nut.
7. Install the bulb (not included) into the socket.
8. Hang crystals on the metal ring and bottom basket, alternating between glass drop A and B.
9. Hang glass drop C at the bottom of the bottom basket.

Note: The fixture requires 3 Candelabra Base Bulbs with a recommended wattage of 40 Watts and a maximum wattage of 60 Watts. For extended use, it is recommended to use LED bulbs.

ASSEMBLY INSTRUCTION

Hang crystals on the rings alternating between crystals A and B

All electrical components must be installed by a licensed electrician in accordance with the National electric code.
You wil need 3- Candelabra Base Bulh 40 Watts Recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE This fixture is Damo rated

How to install

For hanging:

1. Determine the preferred hanging height and adjust to the chain required.
2. Open one link of chain connect it to fixture loop and close the link. Open the other one link of chain connect it to loop of canopy and close the link.
3. Thread the mounting screws into the matching holes of the mounting bar, and tighten with the small hex nut.
4. Secure the mounting bar to the outlet box with the outlet box screws.
5. Raise canopy allowing the mounting screws to protrude through the holes in the canopy, and secure with the ball nut.
6. Hang crystals to the metal ring and bottom basket, alternating between glass drop A and B.
7. Hang glass drop C at the bottom of the bottom basket.
8. Install the bulb(not included) into the socket.

For ceiling:

1. Loose the hex nut of the canopy and disassemble the canopy.
2. Remove the loop on the top of the fixture.
3. Slip the canopy, the metal washer and lock the washer over the nipple, then secure with the hex nut.
4. Thread the mounting screws into the matching holes of the mounting bar, and tighten with the small hex nut.
5. Secure the mounting bar to the outlet box with the outlet box screws.
6. Raise canopy allowing the mounting screws to protrude through the holes in the canopy, and secure with the ball nut.
7. Install the bulb(not included) into the socket.
8. Hang crystals to the metal ring and bottom basket, alternating between glass drop A and B.
9. Hang glass drop C at the bottom of the bottom basket.

Part Number

1. A. (1)-Mounting hardware
2. B. (1)-Canopy W5-7/8’’xH1-1/8’’ #XRF130MKCAN6IN
3. C. (2)-Finial #XRF130MKFIN
4. D. (2)-Loop #XRF130MKLOOP
5. E. (1)-Chain -L72’’, 4mm thick #XRF130MKCHA4MM
6. F. (1)-Metal ring
7. G. (1)-Bottom basket #XRF130MKBT
8. H. (3)-Socket

WARNING: This product can expose you to Lead which is known to the state of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>