Neomounts NM-C440BLACK Monitor Ceiling Mount Instruction Manual

INSTRUCTION MANUAL

NM-C440BLACK
Monitor ceiling mount
WWW.NEOMOUNTS.COM

NM-C440BLACK Monitor Ceiling Mount

PARTS

STEP 1 A
Install the ceiling plate on a wooden joist

STEP 1 B
Install the ceiling plate on a solid brick or concrete ceiling

OPTION A Round ceiling plate
Disassemble the ceiling plate from the rod

OPTION B Round ceiling plate
Attach the round ceiling plate (K) to the top rod

OPTION C Round ceiling plate
Install the round ceiling plate on a wooden joist and place the cover (J)

OPTION D Round ceiling plate
Install the round ceiling plate on a solid brick or concrete ceiling and place the cover (J)

STEP 2 A
Connect the extension pole (installation on the ceiling)

STEP 2 B
Connect the extension pole (installation through the ceiling)

STEP 3
Attach the crossbar to the pole

STEP 4
Open the bracket clamps

STEP 5
Install the adapter brackets and use spacers if necessary

STEP 6
Attach the display to the crossbar

STEP 7
Fasten the screws and adjust the mount to the desired position

CAUTION

1. To ensure safety, please read this manual carefully before installation and follow the instructions. Store this manual in a secure place for future reference.

2. The manufacturer shall not be legally responsible for any equipment damage or personal injury caused by incorrect installation or operation other than that covered in this manual.

3. The mount is designed for easy installation and removal. The manufacturer shall not be liable for damage to equipment or personal injuries arising out of human factors or acts of nature, such as earthquake or typhoon.

4. It is recommended that the mount be installed by qualified personnel only.

5. Atleast two persons are needed to install or remove the product to avoid hazard of falling objects.

6. Please carefully inspect the area where the mount is to be installed:
   • Avoid places that are subject to high temperatures, humidity or contact with water.
   • Do not install the product near air conditioning vents or areas with excess dust and fumes.
   • Only install on vertical walls and avoid slanted surfaces.
   • Do not install in places subject to any shock or vibration.
   • Do not install in places subject to direct exposure to bright light, as it may cause eye fatigue when viewing the display panel.

7. Maintain sufficient space around the display to ensure adequate ventilation.

8. To ensure safe installation, first check the structure of the wall, ceiling or floor and select a secure mounting location.

9. The wall, ceiling or floor should be strong enough to sustain a weight of at least four times of the display and mount combined. The mounting location must be able to withstand earthquake or other strong shock.

10. Do not modify any accessories or use broken parts. Contact your dealer with any questions.

11. Tighten all screws (do not exert excessive force to avoid breaking the screw or damaging its thread).

12. Drill holes and bolts will be left in the wall, ceiling or floor once the display and bracket are removed. Stains may occur after extended use.

13. Since the manufacturer has no way to control the wall, ceiling or floor type and installation of the mount, the warranty of the product shall only cover the body of the mount. The warranty period of the product is 5 years.

14. Please consult the English language manual for any dispute on conditions.

References

• Neomounts

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>