Anmytek C0008 Round Wooden Chandelier Instructions

June 12, 2024
Anmytek

Item Number: C0008

C0008 Round Wooden Chandelier

WARNING (To reduce the risk of fire, electric shock, or injury to persons):

  1. We suggest installation by a licensed electrician.
  2. Please read the instruction carefully and save it as you may need it at a later time.
  3. Before you start, NEVER attempt any work without shutting off the electricity until the work is done. A). Go to the main fuse, or circuit breaker, box in your home. Place the main power switch in the “OFF” position. B). Place the wall switch in the “OFF” position.
  4. The mounting surface should be clean, dry, flat, strong enough and 1/4” larger than the canopy on all side. Any gaps between the mounting surface and canopy exceeding 3/16” should be corrected as required.
  5. Make sure that the ceiling or wall can stand the weight of the lamp before the fixture.
  6. Make sure the voltage you are using is 120V. The maximum wattage is 60W per bulb.
  7. Keep the lamp away from acidic and basic objects in case of damaging the surface of the lamp.
  8. When replacing the bulb, you should turn off or unplug the lamp and you must wait until it is cool as bulbs get hot quickly.
  9. The safety instructions appearing in this manual are not meant to cover all possible conditions that may occur. It must be understood that common sense, caution, and care must be used with any electrical products.

Image for the finished product:

Anmytek C0008 Round Wooden Chandelier - Image for the finished
product

Installation Procedures:

  1. Open the package and take out all the parts or accessories, then place them on a clean flat place.

  2. Connect the lamp body to the middle box 5 by using tube 6 with hooks.

  3. Fix the mounting part 1 to the ceiling by using screw 2.

  4. Connect wire from lamp to the ceiling, wiring instructions as below.
    Anmytek C0008 Round Wooden Chandelier - Installation
Procedures

  5. Fix canopy 3 to the ceiling by using screw ring 4.

  6. Install bulbs 8. (Bulb not included)

  7. Fix the glass shade 7 to the lamp holder.

  8. Check everything installed correctly, then you can turn on the light.
    Anmytek C0008 Round Wooden Chandelier - Installation Procedures
2

We are here to help: service@anmytek.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals