Anmytek H0010 Rattan End Side Table Instruction Manual
- June 4, 2024
- Anmytek
Table of Contents
Item No. : H0010
Rattan End Side Table
ASSEMBLY AND CARE GUIDE
1 HOUR
ASSEMBLY TIME| 2 PEOPLE
REQUIRED FOR ASSEMBLY| 2xim
FLOOR SPACE REQUIRED
---|---|---
SAFETY PRECAUTIONS
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING AND USING THE PRODUCT.
- Please check that all parts are present, need a Phillips head screwdriver (not included) before you start the assembly of your furniture.
- For ease and speed of assembly, we recommend that before you commence each step of the assembly, you identify all the parts required for that step.
- For larger items, please ensure that you have sufficient space and people to assemble your product safely.
- We recommend that, where possible, all items are assembled near the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
- For the protection of your furniture, we recommend that the product I s placed on a protected surface during assembly to prevent any damage.
- During assembly, Do not tighten b o l t s / screws completely until all bolts/screws are lined up and inserted into holes, Do not over-tighten screws and bolts to avoid stripping, and Do not use power tools
- Always place the product on a f l a t, steady and stable surface.
- Do not stand on the product. Do not use the product as a stepladder.
- This product is intended for indoor, household use only as it is a non industrial product
CARE AND CLEANING
- Please periodically check all fittings and re-tighten them as necessary.
- To clean your item, please use a damp cloth and wipe it clean.
- Never allow any kind of liquid to remain on your furniture. If liquid spills onto the product, please wipe it clean as soon as possible.
WARNING: ENSURE THE WALL STRAP IS ATTACHED TO AVOID SERIOUS INJURY
To avoid any serious or fatal injury, this product has been fitted with a wall
strap to prevent toppling. We strongly recommend that this product is
permanently fixed to the wall or other suitable surface. Fixing devices are
not included since different surface materials require different attachments.
Please seek professional advice if you are in doubt about what fixing device
to use.
Do not stand on the product. Do not climb on the product. Do not swing on the
product.
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
HARDWARE LIST
PARTS LIST
AFTER-SALES SUPPORT
If you have any general inquiries or require spare parts for this product,
please feel free to contact us via the following email:
Email: service@anmytek.com
You can contact us for support at any time. We’ll answer you in 24hrs
ASSEMBLY STEPS
STEP 1.
Fix outer drawer runners (i) to parts 6 using screws (d), a s shown. using
screws (d), a s shown.
STEP 2.
Fit wooden dowels (k) to parts 6 and 7. Fix parts 6 and 7 to part 8 using
screws (h), as shown.
ASSEMBLY STEPS
STEP 3.
Fix Quickfit screw c to part 10.
The strap should be moved to step 9.
STEP 4.
Slide part 9 into grooves of parts 6 and 7 , as shown.
ASSEMBLY STEPS
STEP 5.
Insert quick fit screws (c) and wooden insert wooden dowels k and cam locks b
to parts 6 and 7. Fix parts 6 and 7 to part 10, a s shown. Turn the cam locks
clockwise to tighten.
STEP 6.
Fix parts 12 to parts 11 using bolts (I) and Allen key (m), a s shown.
STEP 7.
Secure parts 11 and parts 12 assembled unit using screws (a), as shown.
STEP 8.
Fix stap q to part 10 with screws.
STEP 9.
Fix parts 1 and 3 to part 2 using screws ( a ) , as shown.
Slide part 4 into grooves of parts 1, 2, and 3, as shown.
STEP 10.
Insert quick fit screws (c) to part 5.
Insert cam locks (b) to parts 1 and 3.
Fit part 5 to parts 1 and 3.
Turn the cam locks clockwise to tighten. 
STEP 11.
Fix drawer handle (e) to part 5 using screws (d), a s shown. 
STEP 12.
Fix outer drawer runners (f) and (g) to parts 1 and 3 using screws (d), as
shown.
STEP 13.
Slide drawers into the assembled unit, as shown.
Attach your bedside table to the wall by wall plug (p), wall strap (q) and
fixing screws (r), as shown.
Your headboard is ready for use.
Please note: Maximum recommended weight is 10kg.
WALL FIXING GUIDE
NOTE: Supplied wall plugs are only suitable for use i n masonry walls.
If you have any doubts about using the correct plug for your wall, please seek
professional advice. Failure of the product due to using incorrect fixings is
the responsibility of the installer.
IMPORTANT:
When drilling into walls, always check for hidden wires or pipes , etc.
Tips & Tricks
Make sure that the hardware used is suitable for supporting your unit.
Please consult a qualified trades person if unsure.
If you are unsure, please select a larger screw a n d wall plug.
Ensure that y o u use the recommended drill bit to match the wall plug
and hole size.
Take extra care when drilling high w a l l s , ceiling and ceramic tiles.
Ensure wall plugs are inserted beyond the thickness of the ceramic tiles to
avoid splitting or cracking.
M Ensure that wall plugs are well fitted and are a tight fit in the
drilled hole.
Types of Walls
Use one of the following types of wall plug ( not included) if your walls are
made of brick, breeze block, concrete, stone or wood. Screws may be able to be
fixed dire ctly to solid wood walls as they will provide a secure anchor
point.
| |
---|---|---
1 . General Purpose W a l l Plug
Generally, aerated b l o c k s should not be used to
support heavy loads, use a specialist fitting i n this
case. For light loads, general purpose wall plugs
can be used.| 2. Plasterboard Wall Plug For use when attaching light loads
onto plasterboard partitions.| 3. Cavity Fixing Wall Plug For use with
plasterboard partitions or hollow wooden doors.
| |
4. Cavity Fixing Heavy Duty Wall Plug
For use when fitting o r supporting heavy loads
such as shelving and wall cabinets.| 5. Hammer Fixing Wall Plug
For use with concrete block or brick walls, or walls
stuck with plasterboard. The hammer fixing allows i t
to be fixed to the wall rather than the plasterboard.
Always check the fixing is secure to the retaining wall.| 6. Shield Anchor
Wall Plug Heavy Loads
For use with concrete or brick walls , or for use
with heavier loads such as TV & HiFi speakers
and satellite dishes, etc.
Contact Us : service@anmytek.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>