Anmytek C0001 Rustic Wood Chandelier 3 Lights Instruction Manual

Anmytek C0001 Rustic Wood Chandelier 3 Lights Instruction Manual

INSTRUCTION

WARNING (To reduce the risk of fire, electric shock, or injury to persons):

1. We suggest installation by a licensed electrician.
2. Please read the instruction carefully and save it as you may need it at a later time.
3. Before you start, NEVER attempt any work without shutting off the electricity until the work is done. A). Go to the main fuse, or circuit breaker, box in your home. Place the main power switch in the “OFF” position. B). Place the wall switch in the “OFF” position.
4. The mounting surface should be clean, dry, flat, strong enough and 1/4” larger than the canopy on all side.Any gaps between the mounting surface and canopy exceeding 3/16” should be corrected as required.
5. Make sure that the ceiling or wall can stand the weight of the lamp before the fixture.
6. Make sure the voltage you are using is 120V. The maximum wattage is 60W per bulb.
7. Keep the lamp away from acidic and basic objects in case of damaging the surface of the lamp.
8. When replacing the bulb, you should turn off or unplug the lamp and you must wait until it is cool as bulbs get hot quickly.
9. The safety instructions appearing in this manual are not meant to cover all possible conditions that may occur. It must be understood that common sense, caution, and care must be used with any electrical products.

Image for the finished product:

Installation Procedures

1. Open the package and take out all the parts or accessories, then place them on a clean flat place.
2. Fix the tube 5 to the lamp body 6, then fix the canopy 3 to the tube 5.
3. Install bulbs 7. (Bulb not included)
4. Put on the glass lamp shade 8 to the lamp holder.
5. Mount the hanging plate 1 to the ceiling by using screw 2.
6. Connect wire from lamp to the ceiling, wiring instructions as below
   Connect Black orRed Supply Wire to:| Connect White Supply Wire to:
   ---|---
   Black| White
   Parallel cord (round & smooth)| Parallel cord (square & ridged)
   Clear, Brown, Gold or Black without tracer| Clear, Brown, Gold or Black with tracer
   Insulated wire (other than green)with copper conductor| Insulated wire (other than green)with silver conductor

‘Note: When parallel wires (SPT I & SPT II) are used. The neutral wire is square shaped or ridged and the other wire will be round in shape or smooth (see illus.)

7. Fix canopy 3 to the ceiling by using screw cap 4.
8. Check everything installed correctly, then you can turn on the light.
   

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>