FOS technologies Climate IP4 Pearl Indoor-Outdoor Wall Mount Speaker User Manual
- June 12, 2024
- FOS technologies
Table of Contents
FOS technologies Climate IP4 Pearl Indoor-Outdoor Wall Mount Speaker
Product Information
The product is an indoor/outdoor wall mount speaker available in two models: ClimateIP4Pearl and ClimateIP4Black. It comes with a user’s manual that provides detailed installation instructions and features of the product.
Features
- Model: ClimateIP4Pearl, ClimateIP4Black
- Power Taps: 65mm
- Power at 8ohm
- SPL@ 1M
- Max SPL@ 1M
- Frequency Response
- Dispersion Angel
- Product Size
- All weather loudspeakers for music and speech.
- Stylish design with great sound
- IP66 waterproof finish for all extreme weather applications
- 4.25″weatherproof woofer and 1″silk tweeter 2-way speaker system
- ABS enclosure, stainless metal grille & stainless mounting bracket
- 70V/100V speaker with power tapping or as a low impedance 8 Ohm speaker
- Supplied with 360° rotatable bracket for horizontal and vertical installation angle adjustment
- Black and white color optional
Installation: Ceiling, Wall
- Enclosure Material
- Weight
- Finish Speaker
Specifications
The specifications for the product include power taps, power at8ohm, SPL@ 1M, max SPL@ 1M, frequency response, dispersion angel, product size, installation options (ceiling and wall), enclosure material, weight, and finish speaker.
DIMENSION
Product Usage Instructions
- Drill the hole position on the wall according to the installation plan.
- Fix bracket 3 on the wall surface using screws.
- Assemble bracket 1, bracket 2, and bracket 3 as shown in the installation plan. Make sure the brackets are securely mounted using the supplied screws.
- Adjust the height within the adjustable range mentioned in the installation plan.
- Tighten the screws to secure the adjusted height.
- Lock the screws after adjusting the angle.
- When placing speakers horizontally, ensure that the front net is not touched or loaded with hard-facing materials to prevent deformation.
Note: The user’s manual also includes additional information on installing the bracket accessories and splitting the mounting bracket into three parts.
Bracket Accessories
Split the mounting bracket into 1,2,3, three parts. Fit two six point screws into the mounting slotof the speaker’s back (parallel to the wall speaker to help fit the screws When placing speakers horizontally, be careful not to touch and load the front of the speakernet with hard facing, otherwise it will deform the front net.
- Fix the Bracket 1 as shown, tighten the screws according to the installation plan
- According to the installation plan, after drilling the hole position on the wall, the bracket 3 is fixed on the wall surface. Then the bracket 1, bracket 2, bracket 3 is assembled as shown. Make sure that the bracket is securely mounted (3 parts of the fastening bracket are supplied with screws.)
- According to the installation plan in the adjustable range, adjust the most appropriate height, and then tighten the screws.
Adjustable up and down for 20°
Specificalions are subject to be changed without noti CB,