JVC KWM785BW WVGA AV Digital Media Receiver User Guide
- June 12, 2024
- JVC
Table of Contents
JVC KWM785BW WVGA AV Digital Media Receiver
Product Information
| Trade Name | JVC |
|---|---|
| Products | MONITOR WITH RECEIVER |
| Model Name | KW-M785BW |
| Responsible Party | JVCKENWOOD USA CORPORATION |
| Address | 4001 Worsham Avenue, Long Beach, CA 90808, U.S.A. |
| Phone | 1-800-252-5722 |
Product Usage Instructions
To ensure proper usage of the KW-M785BW Monitor with Receiver, please follow the instructions below:
- Make sure the device is placed at least 20 cm or more away from a person’s body during installation and operation.
- Do not co-locate or operate the transmitter in conjunction with any other antenna or transmitter.
- Ensure that the CR Coin Cell Lithium Battery is handled according to special handling procedures if applicable. For more information, visit the following website: https://www.dtsc.ca.gov/hazardouswaste/perchlorate
- Comply with the FCC/ISED radiation exposure limits and keep the radiator at a safe distance from a person’s body.
- Do not modify or make changes to the device that are not expressly approved by the responsible party for compliance, as it may void the user’s authority to operate the equipment.
- Ensure that the device does not cause harmful interference and accepts any interference received, including interference that may cause undesired operation.
Please refer to the user manual for additional information and troubleshooting guidelines.
KW-M785BW
MONITOR WITHRECEIVER
Quick Start Guide
MONITEUR AVEC RÉCEPTEUR
Guide de démarrage rapide
MONITOR CON RECEPTOR
Guía de inicio rápido
ENGLISH FRANÇAIS ESPAÑOL
For detailed operations and information, refer to the INSTRUCTION MANUAL on
the following website: Pour les opérations et les informations détaillées,
reportez-vous au MANUEL D’INSTRUCTIONS sur le site web suivant: Para obtener
más información y detalles sobre las operaciones, consulte el MANUAL DE
INSTRUCCIONES en el siguiente sitio web:
https://www.jvc.net/cs/car/
B5K-0945-00 (KN)
Información acerca de la eliminación de equipos eléctricos y electrónicos al
final de la vida útil (aplicable a los países que hayan adoptado sistemas
independientes de recogida de residuos)
Los productos con el símbolo de un contenedor con ruedas tachado no podrán ser
desechados como residuos domésticos. Los equipos eléctricos y electrónicos al
final de la vida útil, deberán ser reciclados en instalaciones que puedan dar
el tratamiento adecuado a estos productos y a sus subproductos residuales
correspondientes. Póngase en contacto con su administración local para obtener
información sobre el punto de recogida más cercano. Un tratamiento correcto
del reciclaje y la eliminación de residuos ayuda a conservar los recursos y
evita al mismo tiempo efectos perjudiciales en la salud y el medio ambiente.
Informação sobre a eliminação de pilhas Este produto não deve ser eliminado
como lixo doméstico geral. Devolva a pilha usada ao revendedor ou entidade
autorizada para que a mesma seja devolvida ao fabricante ou importador. A
reciclagem e a eliminação de lixo de maneira apropriada ajudarão a conservar
os recursos naturais ao mesmo tempo que prevenirão os efeitos prejudicais à
nossa saúde e ao meio ambiente.
FCC CAUTION
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: Reorient or relocate
the receiving antenna. Increase the separation between the equipment and
receiver. Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected. Consult the dealer or an
experienced radio/TV technician for
help.
Supplier’s Declaration of Conformity
Trade Name:
JVC
Products:
MONITOR WITH RECEIVER
Model Name:
KW-M785BW
Responsible Party: JVCKENWOOD USA CORPORATION
4001 Worsham Avenue, Long Beach,
CA 90808, U.S.A.
PHONE: 1-800-252-5722
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO
THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE,
AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
Para cumplimiento de la IFT: “La operación de este equipo está sujeta a las
siguientes dos condiciones: (1) es posible que este equipo o dispositivo no
cause
interferencia perjudicial y (2) este equipo o dispositivo debe aceptar
cualquier
interferencia, incluyendo la que pueda causar su operación no deseada”
CALIFORNIA, USA ONLY This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material–special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate
ISED Caution This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference. 2. This device must accept any
interference, including
interference that may cause undesired operation of the device.
Attention de `ISED L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1. L’appareil ne doit pas produire de brouillage. 2. L’appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
CAUTION This equipment complies with FCC/ISED radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the ISED radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20 cm or more away from person’s body.
ATTENTION Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non contrôlé et respecte les règles les radioélectriques (RF) de la FCC lignes directrices d’exposition et d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’ISED. Cet équipement doit être installé et utilisé en gardant une distance de 20 cm ou plus entre le radiateur et le corps humain.
· Windows Media is a registered trademark or trademark of Microsoft
Corporation in the United States and/or other countries. This product is
protected by certain intellectual property rights of Microsoft. Use or
distribution of such technology outside of this product is prohibited without
a license from Microsoft.
· Use of the Made for Apple badge means that an accessory has been designed to
connect specifically to the Apple product(s) identified in the badge and has
been certified by the developer to meet Apple performance standards. Apple is
not responsible for the operation of this device or its compliance with safety
and regulatory standards. Please note that the use of this accessory with an
Apple product may affect wireless performance.
· Apple, iPhone, and Lightning are trademarks of Apple Inc., registered in the
U.S. and other countries.
· Apple, Siri, Apple CarPlay and Apple CarPlay logo are trademarks of Apple
Inc., registered in the U.S. and other countries.
· App Store is a service mark of Apple Inc., registered in the U.S. and other
countries.
· IOS is a trademark or registered trademark of Cisco in the U.S. and other
countries and is used under license.
· Google, Android, Android Auto, Google Maps and other marks are trademarks of
Google LLC.
· To use Android Auto on your car display, you’ll need an Android Auto
compatible vehicle or aftermarket stereo, an Android phone running Android 6.0
or higher, an active data plan, and the Android Auto app.
· Wi-Fi® is a registered trademark of Wi-Fi Alliance®. · The Wi-Fi CERTIFIEDTM
Logo is a registered trademark of Wi-Fi
Alliance®. · The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of such marks by
JVCKENWOOD Corporation is under license. Other trademarks and trade names are
those of their respective owners.
· SiriusXM and all related marks and logos are trademarks of Sirius XM Radio,
Inc. All rights reserved.
· The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
· Font for the this product is RT Font designed and sold by Ricoh Industrial
Solutions Inc.
· Linux® is the registered trademark of Linus Torvalds in the U.S. and other
countries.
· THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE
PERSONAL USE OF A CONSUMER OR OTHER USES IN WHICH IT DOES NOT RECEIVE
REMUNERATION TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC
VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN
A PERSONAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO
PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER
USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE
HTTP://WWW.MPEGLA.COM
ii
· THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE
FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER FOR (¡) ENCODING VIDEO IN
COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD (“MPEG-4 VIDEO”) AND/OR (¡¡)
DECODING MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND
NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY
MPEG LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR
ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL,
INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC.
SEE HTTP://WWW.MPEGLA.COM
· THIS PRODUCT IS LICENSED UNDER THE VC-1 PATENT PORTFOLIO LICENSE FOR THE
PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO ( i ) ENCODE VIDEO IN
COMPLIANCE WITH THE VC-1 STANDARD (“VC-1 VIDEO”) AND/OR ( ii ) DECODE VC-1
VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NONCOMMERCIAL
ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE VC-1
VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL
INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM
Important Notice on Software
Software License on This Product The software embedded in this product
comprises a number of independent software components, each of which is
copyrighted by JVCKENWOOD Corporation or by a third party.
This product uses software components that are based on an End-User License
Agreement (hereinafter called “EULA”) stipulated by JVCKENWOOD Corporation and
by third parties.
The EULA dictates the availability of the source codes of freesoftware
components as a prerequisite to distributing them in executable form under the
terms of the GNU General Public License or the Lesser General Public License
(hereinafter called “GPL/LGPL”). To get information about the software
components that are subject to the terms of the GPL/LGPL, please visit the
following Website:
Website URL https://www3.jvckenwood.com/english/download/gpl/
Queries concerning the contents of the source code or the like will not be
accepted.
Please note that software components based on a EULA that is not subject to
the terms of the GPL/LGPL or those that have been developed or created by
JVCKENWOOD Corporation will be excluded from the scope of source code
disclosure.
Because licenses to use software components distributed under the GPL/LGPL are
offered to the customers for free of charge, no warranty is granted to the
customers, whether explicitly or implicitly, to the extent of the applicable
laws.
Unless otherwise stipulated by the applicable laws or agreed upon in writing,
the copyright holders or those who are entitled to modify and redistribute the
software components are not held responsible for any and all damages resulting
from their use or from inability to use them. For more information about the
terms of use of the software components, required items of compliance and so
on, please refer to the GPL/LGPL.
Customers wishing themselves to use a software component that is subject to
the GPL/LGPL embedded in this product are encouraged to read the terms of the
corresponding license before use. Because each individual license is
prescribed by a third party other than JVCKENWOOD Corporation, the original
(English) of the license is presented.
EULA
Software License Agreement JVCKENWOOD Corporation (hereinafter called
“Licensor”) holds either the copyright to the embedded software or the right
to sublicense it. This agreement establishes the conditions under which the
customer uses this “Licensed Software.”
The customer shall agree to the terms of this license agreement before
proceeding to use Licensed Software.
This agreement is deemed to have taken effect when the customer (hereinafter
called “User”) has used a product implementation of Licensed Software.
The Licensed Software may contain software Licensor has been licensed to use
by third parties directly or indirectly. Some third parties may have terms of
use prescribed for their customers, apart from this Software License
Agreement. This agreement does not apply to such software. Be sure to consult
“Important Notice on Software” as presented separately.
Article 1 (General) Licensor grants to User a non-exclusive, non-assignable
right of use Licensed Software within the country where the User purchases the
Product (hereinafter the “Country”) (except for the exception provided for in
Paragraph 1, Article 3).
Article 2 (Right of Use) 1. The rise of use granted under this agreement is
the right to
use Licensed Software in this product. 2. User may not duplicate, copy,
modify, add to, translate
or otherwise alter, or loan licensed Software and the associated literature in
whole or in part.
iii
3. Use of Licensed Software is limited to a private extent, and Licensed
Software may not be distributed, licensed or sublicensed for any purposes
whatsoever, including commercial use.
4. User shall use Licensed Software as per the instruction manual or
instructions given in the help file and may not use or duplicate data in
violations of the regulations of the Copyright Law or other governing laws by
using Licensed Software in whole or in part.
Article 3 (Terms of License) 1. In assigning this product, User may not retain
the original
copy of the embedded Licensed Software (including associated literature,
updates and upgrades) and any duplicates and associated literature with regard
to the license to use Licensed Software. User may transfer Licensed Software
only to the condition of binding the assignee to abide by the terms of this
Software License Agreement. 2. User may not reverse-engineer, disassemble,
decompile or otherwise analyze the source code of Licensed Software.
Article 4 (Rights to Licensed Software) All rights to Licensed Software and
the associated literature, including copyrights, shall reside with Licensor or
the original right holder who has granted the Right of Use and right to
sublicense to Licensor (hereinafter referred to as “Original Right Holder”),
and User does not have any rights other than Right of Use granted hereunder
with regard to Licensed Software and the associated literature.
Article 5 (Exemption Granted to Licensor) 1. Licensor and Original Right
Holder do not assume any
responsibility for damages caused to User or third parties resulting from the
exercise by User of the license granted hereunder, unless otherwise provided
by any law to the contrary. 2. Licensor does not warrant Licensed Software to
be merchantable, compatible and fit for specific purposes.
Article 6 (Responsibility for Third Parties) If disputes over the infringement
of third parties’ intellectual property rights, such as copyrights and patent
rights, arise out of the use of Licensed Software by User, User shall resolve
these disputes at User’s own expenses while keep Licensor and Original Right
Holder harmless.
Article 7 (Secrecy Obligation) User shall keep confidential Licensed Software
provided hereunder, information contained in the associated literature or the
like and those provisions of this agreement not yet in public knowledge and
may not disclose or leak these to third parties without prior written consent
from Licensor.
Article 8 (Cancellation of the Agreement) Licensor reserves the right to
cancel this agreement forthwith and claim compensation from User for the
damages caused by such cancellation when User: (1) Breaches any of the
provisions of this agreement, or (2) Has received a petition for seizure,
provisional seizure,
provisional disposition or any other kind of compulsory execution.
Article 9 (Destruction of Licensed Software) If this agreement is terminated
under the provision of the foregoing paragraph, User shall destroy Licensed
Software, along with all associated literature and its duplicates, within two
(2) weeks from the date of termination.
Article 10 (Copyright Protection) 1. Copyrights and all other intellectual
property rights relating
to Licensed Software shall reside with Licensor and Original Right Holder and
in no circumstances with User. 2. User shall abide by the laws relating to
copyrights and intellectual property rights in using Licensed Software.
Article 11 (Export Control) 1. Licensed Software and the associated literature
or the
like may not be exported to places outside the Country (including transmission
outside the Country over the Internet or the like). 2. User agrees that
Licensed Software is subject to export controls imposed by the Country and the
United States of America. 3. User agrees to comply with all the international
and domestic laws that apply to this software (U.S. Export Administration
Regulations and regulations established by the U.S., the Country and their
governmental agencies regarding usage by end users and export destinations).
Article 12 (Miscellaneous) 1. Even if this agreement is invalidated in part by
law, all other
provisions shall remain in effect. 2. Licensor and User shall consult each
other in good faith to
resolve any matters not provided for in this agreement or questions arising
from the interpretation of this agreement. 3. Licensor and User agree that
this agreement is governed by the law of Japan and that all dispute involving
claims and obligations that may arise out of this agreement will be settled by
arbitration at the Tokyo District Court as the court of first instance.
iv
About this Guide
This Quick Start Guide describes basic functions of this unit. For functions
not described in this Guide, refer to the Instruction Manual on the following
website: https://www.jvc.net/cs/car/
The displays and panels shown in this Guide are examples used to provide clear
explanations of the operations. For this reason, they may be different from
the actual displays or panels.
This Guide mainly explains operations using the buttons on the monitor panel
and keys on the touch panel.
C
Important Notice
To ensure proper use, please read through this Guide before using this
product. It is especially important that you read and observe WARNINGS and
CAUTIONS in this Guide. Please keep the Guide in a safe and accessible place
for future reference.
WARNINGS
To prevent accidents and damages · DO NOT install any unit or wire any cable
in a
location where; it may obstruct the steering wheel and gearshift
lever operations. it may obstruct the operation of safety devices such
as air bags. it may obstruct visibility. · DO NOT raise the volume level too
much, as this will make driving dangerous by blocking outside sounds, and may
cause hearing loss. · DO NOT operate the unit while driving. If you need to
operate the unit while driving, be sure to look around carefully. · Stop the
car before performing any complicated operations. · The driver must not watch
the monitor while driving.
CAUTIONS
To care for the unit · If you have parked the car for a long time in hot or
cold weather, wait until the temperature in the car becomes normal before
operating the unit. To care for the monitor · The monitor built into this unit
has been produced with high precision, but it may have some ineffective dots.
This is inevitable and is not considered defective. · Do not expose the
monitor to direct sunlight. · Do not operate the touch panel using a ball-
point pen or similar tool with a sharp tip. Touch the keys on the touch panel
with your finger directly (if you are wearing a glove, take it off). · When
the temperature is very cold or very hot… Chemical changes occur inside,
causing
malfunction. Pictures may not appear clearly or may move
slowly. Pictures may not be synchronized with the sound or picture quality may
decline in such environments. On the volume setting · Digital devices produce
very little noise compared with other sources. Lower the volume before playing
these digital sources to avoid damaging the speakers by sudden increase of the
output level.
About GPS
When you turn on this unit for the first time, you must wait while the system
acquires GPS signals from satellites. This process could take up to several
minutes. Make sure your vehicle is outdoors in an open area away from tall
buildings and trees for fastest acquisition. Once the system acquires GPS
signals, this unit will acquire them quickly each time you turn on this unit.
ENGLISH 3
Component Names and Basic Operations
Monitor panel
1
2
3
4 5 6
7
8
(USB1)5V 1.5A
1 Remote sensor 2 Screen (touch panel) 3 Monitor panel 4 FNC – button
· FNC (Press): Pops up the function menu (page 12).
· (Hold): Changes the screen from the playback source to the others. While
Apple CarPlay or Android Auto is connected, switches to the current background
playback source screen and vice versa. While no device for Apple CarPlay or
Android Auto is connected, switches to the current background playback source
screen and the other setting-related screen, home screen, or source selection
screen and vice versa.
5 button (Press): Activates the voice recognition. When no device for Apple
CarPlay, Android Auto, and Bluetooth phone is connected, pressing and holding
this button displays Bluetooth pairing waiting dialog (page 8).
6 / button · (Press): Turns on the power. · (Hold): Turns off the power. ·
(Press): Displays the Home screen (see the following) while the power is on.
7 Volume +/ buttons 8 USB terminal from the rear panel
The buttons on the monitor illuminate and change the color periodically with
the unit turned on.
Touching the operation keys performs the following actions: 1 The current
playback source information.
Displays the current playing source control screen. · Touching [ < ] scrolls
the text if not all of the text
is shown. 2 Selects the playback source. 3 Displays the
· When you touch the clock time indication, you can move to the
5 Displays all selectable playback sources and options.
Turning on the power
Home screen
· You can customize the Home screen. · To display the Home screen from other
screens, press
the / button.
· When you turn on this unit for the first time, you must wait while the system acquires GPS signals from satellites. This process could take up to several minutes.
Apple CarPlay Where you are now in this <
Turning off the power
Sat. Jan. 01 2022
On the monitor panel:
(Hold)
4 ENGLISH
Component Names and Basic Operations
On the screen:
1 Display the source/option selection
screen. On the Home screen:
Turning off the AV source
1 Display the source/option selection
screen. On the Home screen:
2 Turn off the power.
On the source/option selection screen (page 11):
2 Turn off the AV source.
On the source/option selection screen (page 11):
Adjusting the volume
You can adjust the volume (00 to 40) by pressing + to increase and pressing
to decrease. · When volume level is below 15,
holding + increases the volume continuously to level 15.
Attenuating the sound
On the source control screen:
To cancel attenuation:
· You can also use the pop-up function menu (page 12).
Initial settings
When you power on the unit for the first time or initialize the unit, the
Initial Settings
Demonstration Language Front Camera Rear Camera User Customize Viewing Angle
ON OFF English Enter Enter Enter Enter Finish
Once completed, Home screen appears.
ENGLISH 5
Component Names and Basic Operations
In-Car Connections
Date and clock settings
You can adjust the date and clock as follows using the
1 Display the Home screen.
2 Display the
On the Home screen:
3 Display the
then enter the item-setting screen you want to change (2).
Settings
Audio Language
Display Clock
Input Time Format
System Time Zone
Key
Clock Adjust
English Enter Enter Enter Enter
Eg. when selecting
4 Set or adjust the date and clock.
Clock Adjust
Year Month Date 2022 / 1 / 1
Hour Minute AM4 : 1
SET
To operate your smartphone hands-free, and Apps of the smartphone (Apple
CarPlay, Android Auto, and USB Mirroring), the following connections are
required. · For Wired Apple CarPlay (page 13), connect
iPhone with USB. · For Wireless Apple CarPlay (page 13), connect
iPhone with Bluetooth (Wi-Fi is auto-connected). · For Android Auto (page 15):
Android device with Android version 6.0 or later can be used with USB (In
this case, Bluetooth is auto-connected, but Wi-Fi is not available)
To wirelessly use Android Auto with this unit, connect Android device with
Bluetooth (Wi-Fi is auto-connected)
You need a compatible Android device (see below) with an active data plan. ·
An Android device with Android version 11 or later and 5 GHz Wi-Fi (subject to
local regulations*); or · A Google-branded or Samsung-branded device with
Android version 10; or · A Samsung Galaxy S8, Galaxy S8+ or Note 8, with
Android 9
You can find more information at <g.co/androidauto/requirements>.
· For USB Mirroring (page 16) connect the Android device both with USB and
Bluetooth.
· For Hands-Free Phone (page 21) and Bluetooth audio player (page 23), connect
your device with Bluetooth®.
- Refer to the local regulations of your residential area.
6 ENGLISH
In-Car Connections
USB connection
Connect your smartphone (iPhone or Android device) for using Apps on the
screen of this unit. · You can also connect a USB mass storage class
device such as a USB memory, digital audio player, etc. to the unit. But you
cannot connect a PC, portable HDD and USB hub.
iPhone/Android device
AB
USB device
(USB1)5V 1.5A USB terminal from the rear panel
A For connecting your Android device, use the USB cable (commercially
available)
B For connecting your iPhone, use the USB cable for iPhone KS-U62 (optional
accessory)
Bluetooth® connection
Information for using Bluetooth devices Bluetooth is a short-range wireless
radio communication technology for mobile devices such as mobile phones
(smartphones), portable PCs, and other devices. Bluetooth devices can be
connected without cables and communicate with each other. · Some Bluetooth
devices may not be used with this
unit depending on the Bluetooth version of the device.
Pairing a Bluetooth device
When you connect a Bluetooth device to the unit for the first time, register
the device to this unit (pairing). Pairing allows Bluetooth devices to
communicate with each other. · The pairing method differs depending on the
Bluetooth version of the device. For devices with Bluetooth 2.1:
You can pair the device and the unit using SSP (Secure Simple Pairing) which
only requires confirmation. For devices with Bluetooth 2.0: You need to
enter a PIN code both on the device and the unit for pairing. · Once the
connection is established, it is registered in the unit until you initialize
the Bluetooth settings or the unit itself. Up to five devices can be
registered in total. · To use the Bluetooth function, you need to turn on the
Bluetooth function of the device.
Auto pairing When
with Android Auto: When the device is connected via USB, it is automatically
paired regardless of this setting.
Automatic Wi-Fi connections This unit is equipped with the Wi-Fi function. ·
You can turn on or off the Wi-Fi function on the
<Wireless/HDMI SETUP> settings. To use the Wi-Fi function, select [Wi-Fi].
Once your iPhone or Android device is paired successfully with Bluetooth or
connected with USB for Apple CarPlay or for Android Auto, it is automatically
connected with Wi-Fi. And from the next time on, it is automatically connected
through Wi-Fi. · Turn on the Bluetooth and Wi-Fi functions on your iPhone or
Android device. · It is necessary to connect the GPS antenna in order to use
wireless Apple CarPlay.
ENGLISH 7
In-Car Connections
Pairing a Bluetooth device using SSP (for Bluetooth 2.1)
1 Display the Home screen.
2 Display the
From the Home screen (page 4), touch as follows:
Then, on the
display the
3 Make the unit ready for pairing.
On the
Please open Bluetooth settings on your device and select the device name below
KW-MXXXXX Cancel
4 Search for the unit “KW-M785BW” from
your Bluetooth device.
5 Confirm the request both on the device
and the unit. On the device: Confirmation method varies for the device.
On the unit:
BT Pairing request To perform BT Pairing Please confirm the device display KW-
MXXXXX (device name)
012345 (PIN code)
Pair
Cancel
Pairing is complete.
To reject the request: Touch [Cancel].
6 Register the usage of the Bluetooth
device. · See “Registering the usage of the devices” on
page 9.
Once pairing is completed… · For iPhone compatible with wireless Apple
CarPlay A confirmation message appears. Touch [Yes] to display the Apple
CarPlay screen for
wireless connection. Touch [No] not to use Apple CarPlay for the
time being. To use Apple CarPlay, select it on the
· For Android device compatible with Android Auto When [Android Auto]
(initial) is selected for the
8 ENGLISH
In-Car Connections
Pairing a Bluetooth device using a PIN code (for Bluetooth 2.0)
1 Display the Home screen.
2 Display the
From the Home screen (page 4), touch as
follows:
Then, on the
PIN Code Set
0000
1
2
3
4
5
6
7
8
9
0
Enter Clear
· Initial PIN code : [0000] · If you do not need to change the PIN code
[0000],
just touch [Enter].
4 Make the unit ready for pairing.
On the
Please open Bluetooth settings on your device and select the device name below
KW-MXXXXX
Cancel
5 Search for the unit “KW-M785BW” from
your Bluetooth device.
6 Select the unit “KW-M785BW” on your
Bluetooth device. Pairing is complete.
7 Register the usage of the Bluetooth
device. · See “Registering the usage of the devices” that
follows.
Once pairing is completed, see page 8. · For iPhone compatible with wireless
Apple
CarPlay · For Android device compatible with Android
Auto
Registering the usage of the devices
You can confirm and change the usage (profile) of the registered devices on
the
unwanted devices on the device list.
1 Display the
From the Home screen (page 4), touch as follows:
Then, on the
The currently activated (connected) devices are highlighted on the list. · Six
devices can be displayed on the list; five
devices connected by Bluetooth and one by USB. · You can also use the pop-up
function menu to
display the
ENGLISH 9
In-Car Connections
· Touch [ < ] scrolls the text if not all of the text is shown.
· For list/setting screen operations, see also page 12.
2 Select the device you want to use.
Device List Device Name 1 Device Name 2 Device Name 3 Device Name 4 Device
Name 5 Device Name 6
· When Apple CarPlay or Android Auto is activated for the selected device, it
will be disconnected. A warning message appears. Touch [Yes] to continue.
3 Select the profile for the selected device.
4 Touch [Close] to finish.
The
About the profile icons · Available profile for the listed devices are in
white.
When the profile is active for the devices, it becomes blue. Unavailable
device and profile are in gray. · Bluetooth icon is displayed only when the
device is connected by Bluetooth. · Apple CarPlay and Android Auto icons
illuminate when they are active. · Mirroring icon is displayed when the device
is selected as Mirroring in profile setting.
Icon Profile Bluetooth
HFP1
HFP2
A2DP SPP
Apple CarPlay Android Auto Mirroring
Status (on/off/unavailable) Bluetooth connection Hands-Free phone 1
Hands-free phone 2
Bluetooth audio player Apps Apple CarPlay Android Auto USB Mirroring
Please Select a profile
TEL(HFP)1 TEL(HFP)2 Audio(A2DP) / APP(SPP) USB Mirroring
Close
· [TEL(HFP)1]/[TEL(HFP)2]: To use the device as hands-free phone 1 and 2.
· [Audio(A2DP)/APP(SPP)]: To use the device as Bluetooth audio or Apps (Apple
CarPlay/Android Auto).
· [USB Mirroring]: To use the device as USB Mirroring.
10 ENGLISH
Various Screens and Operations
You can display or change to other screens at any time to show information, change the playback source, change the settings, etc.
Source/option selection screen
Touch [ ] on the Home screen to display the source/ option selection screen.
Camera
Apps
Now Playing Bluetooth Audio
SETUP
Apple CarPlay Android Auto Bluetooth Audio Phone
USB
AV-IN
Tuner
SiriusXM USB Mirroring HDMI
AV Off
Maestro
Power Off
Touching the operation keys performs the following actions:
[Camera] [Apps] [Now Playing] [SETUP] [X]
Switches to the camera view.
Switches to the currently available Apps [Apple CarPlay] or [Android Auto].
Displays the source currently played back. Displays the
Closes the screen and return to the Home screen.
[Apple CarPlay] [Android Auto] [Bluetooth Audio] [Phone] [USB] [AV-IN] [Tuner] [SiriusXM] [USB Mirroring] [HDMI] [AV Off] [Maestro] [Power Off]
Displays the home screen of Apple CarPlay.
Displays the home screen of Android Auto.
Plays a connected Bluetooth audio player.
Displays the phone control screen.
Plays files on a USB device.
Switches to the external AV component connected to the AVIN input terminal.
Switches to the radio broadcast.
Switches to the SiriusXM® radio broadcast.
Displays the screen of USB Mirroring.
Switches to the HDMI device.
Turns off the AV source.
Switches to the Maestro option screen.
Turns off the power.
To return to the Home screen Press the / button on the monitor panel or touch [X].
Source control screen
You can operate the playback source using the source control screen. · The
operation keys and information displayed vary
for each source. Here the common operation keys are explained. For more about
the other operation keys, see the respective page of each source section.
1 Current playback source icon and name · Touch [ > ] to show the source icons
on the Home screen. Then touch [ < ] to hide the other icons.
2 Content information area · Touch [ < ] to scroll the text if not all of the
text is shown. · Touch [ < ] to widen the window to show more detailed
information. Then touch [ > ] to close the window.
3 Phone control screen indicator · Touch to display the phone control screen
(page 22).
ENGLISH 11
Various Screens and Operations
4 Sound attenuating key (page 5) 5 TEL indicator is shown when a hands-free
phone is
connected. 6 Clock display 7 Operation window tab
· Touch [ > ] to widen the operation window to show more operation keys
besides those shown on the operation key area (p). Then touch [ < ] to close
the window.
8 TI indicator 9 SiriusXM signal strength indicator p Operation key area
Using gesture control
You can also control playback by moving your finger on the touch panel as
follows (for some sources, the gesture control is not available).
Using the pop-up function menu
You can easily access the frequently used features.
1 Display the pop-up function menu.
2 Touch one of the following items you
want to use.
[ ] [ -] [ ] [ ]
[ ] [ ]
Displays the
· (Touch) Switches the screen. · (Hold) Turns off the screen.
Displays the
Displays the
Displays the
Displays the view from the connected camera.
To close the pop-up function menu Press FNC- on the monitor panel or touch the
screen anywhere other than the pop-up function menu.
List/setting screen
Below are the common operation keys which appear on the list/setting screen. ·
The appearance or location of the operation keys
may differ, however the similar operation keys have the same operations. ·
Available operation keys differ depending on the setting screens. Not all
these operation keys are shown on every screen.
1MBZ
“; 5PQ 6Q
· Sliding the finger up/down: Selects a folder.
· Sliding the finger left/right: Selects a file.
· Moving your finger clockwise/counterclockwise: Increases/decreases the
volume.
- You can change the last four items to display on the pop-up function menu.
12 ENGLISH
Various Screens and Operations
Apps
Touching the operation keys performs the following actions:
1 Returns to the upper layer.1 2 Finishes the setting and closes the current
screen. 3 Plays all files in the folder containing the current
file.2 4 (Not displayed for folder list) Enters alphabet search
to list the items in alphabetical order. 2 When a key pad is displayed,
follow the procedure below. 1 Touch the first letter you want to search for.
· To search by a number, touch [1,2,3…]. · To search by a symbol, touch [#]. 2
Select your desired item on the search result list. 5 Returns to the root
folder.2 6 Returns to the upper layer.2 7 Changes the page to display more
items. 8 Returns to the previous screen.
1 Only for Bluetooth Audio *2 Only for USB
You can use the Apps installed in your iPhone and Android device by using
“Apple CarPlay,” “Android Auto,” and “USB Mirroring.” · For iPhone: You can
use Apple CarPlay (see the
following). · For Android device: You can use Android Auto
(page 15) and USB Mirroring (page 16).
Preparation: Make sure that the microphone is connected (page 30).
Using Apps of iPhone — Apple CarPlay
About Apple CarPlay Apple CarPlay is a smarter, safer way to use your iPhone
in the car. Apple CarPlay takes the things you want to do with iPhone while
driving and displays them on the screen of this unit. You can get directions,
make calls, send and receive messages, and listen to the music from iPhone
while driving. You can also use Siri voice control to make it easier to
operate iPhone. · For details about Apple CarPlay, visit
https://apple.com/ios/carplay/.
Compatible iPhone devices You can use Apple CarPlay with the following iPhone
models. iPhone 6S, 6S Plus, 7, 7 Plus, 8, 8 Plus, X, XS, XS Max, XR,11, 11
Pro, 11 Pro Max, SE (1st/2nd generation), 12, 12 mini, 12 Pro, 12 Pro Max, 13,
13 mini, 13 Pro, 3 Pro Max
Connecting iPhone compatible with Apple CarPlay See pages 6 to .
If two iPhone devices compatible with Apple CarPlay are connected wirelessly,
the device recognized first is used for Apple CarPlay. To use the other
iPhone, select it on the
ENGLISH 13
Apps
Starting Apple CarPlay
Once the wireless setting and connection are done for the first time, the
source is automatically changed, and you can use of the Apps of the connected
iPhone. · Unlock your iPhone beforehand. · You cannot use Apple CarPlay when
the screen
recording function is enabled on the iPhone.
Apple CarPlay screen operation
You can use the Apps of the connected iPhone. The items displayed and the
language used on the screen differ among the connected devices.
To change the source from the others Touch [Apple CarPlay] on the source/option selection screen (page 11).
Camera
Apps
Now Playing Bluetooth Audio
SETUP
Apple CarPlay Android Auto Bluetooth Audio Phone
USB
AV-IN
Tuner
SiriusXM USB Mirroring HDMI
AV Off
Maestro
Power Off
The Apple CarPlay screen is displayed.
1 Application buttons
Starts the application.
2 Short cut buttons
3 [
] button
· (Touch) Displays the home screen of Apple
CarPlay.
· (Hold) Activates Siri.
4 [HOME] button*
Exits the Apple CarPlay screen and displays the
Home screen.
- This icon design may change depending on the iOS version.
To exit the Apple CarPlay screen Touch [HOME] on the Apple CarPlay screen, or press the / button on the monitor panel.
Using Siri
You can activate Siri while the Apple CarPlay screen is displayed.
On the monitor panel:
1 Press the button on the monitor panel. 2 Talk to Siri through the
microphone.
To deactivate Siri, press the button again.
On the Apple CarPlay screen:
1 Touch and hold [
].
2 Talk to Siri through the microphone.
To deactivate Siri, touch [
].
Switching the Apple CarPlay screen and the current playback source screen
You can switch the Apple CarPlay screen and the current playback source screen
when the App of the Apple CarPlay without audio-output is used.
Press and hold FNC- button on the monitor panel. · Each time you press and
hold the button, the screen
alternates. · You can also use the pop-up function menu
(page 12). The screen cannot be switched in some cases, such
as while the picture from the connected camera or a message window is
displayed.
14 ENGLISH
Apps
Using the Apps of an AndroidTM device — Android AutoTM
About Android Auto Android Auto enables you to use features of your Android
device convenient for driving. You can easily access route guidance, make
calls, listen to music, and access convenient features on the Android device
while driving. · For details about Android Auto, visit <https://www.
android.com/auto/> and <https://support.google. com/androidauto>.
Compatible Android devices · See page 6.
Connecting an Android device compatible with Android Auto See pages 6 to .
· If two Android devices compatible with Android Auto are connected
wirelessly, the device recognized first is used for Android Auto. To use the
other Android device, select it on the
· Bluetooth mobile phone currently connected is disconnected when Android
device with Android Auto is connected with Bluetooth.
Starting Android Auto
Selecting [Android Auto] on the screen displays the Android Auto screen and
enable use of the Apps of the connected Android device. · Unlock your Android
device beforehand.
Operation buttons on the Android Auto screen
You can perform the operations of the Apps of the connected Android device.
The items displayed on the screen differ among the connected Android device.
Preparation: Be sure [Android Auto] is selected for the
To change the source from the others Touch [Android Auto] on the source/option selection screen (page 11).
Camera
Apps
Now Playing Bluetooth Audio
SETUP
Apple CarPlay Android Auto Bluetooth Audio Phone
USB
AV-IN
Tuner
SiriusXM USB Mirroring HDMI
AV Off
Maestro
Power Off
The Android Auto screen is displayed.
1 Application/information buttons Starts the application or displays
information.
To exit the Android Auto screen Press the / button on the monitor panel.
Using voice guidance of the Android device
You can activate the voice guidance of the Android device while the Android
Auto screen is displayed.
1 Press the button on the monitor panel.
The voice guidance is activated.
2 Speak to the microphone to operate the
Android device.
To cancel the voice guidance, press the button. Each time you press the button, the voice guidance turns on and off.
ENGLISH 15
Apps
Switching the Android Auto screen and the current playback source screen
You can switch the Android Auto screen and the current playback source screen
when the App of the Android Auto without audio-output is used.
Press and hold FNC- button on the monitor panel. · Each time you press and
hold the button, the screen
alternates. · You can also use the pop-up function menu
(page 12).
The screen cannot be switched in some cases, such as while the picture from
the connected camera or a message window is displayed.
Using the Apps of an Android device — USB Mirroring
This feature is only used with Android device. By installing JVC’s Mirroring
OA App into your Android device, the screen of the Android device is displayed
on the monitor panel of this unit, and you can operate the Android device
using the touch panel of this unit. · For details about JVC’s Mirroring, visit
https://www.jvc.net/cs/car/.
Compatible Android devices Android version 7.0 or later
Installing JVC’s Mirroring OA App You can obtain “Mirroring OA for JVC” in
Google Play. · Make sure to install the most recent version into your
Android device. · When you use “Mirroring OA for JVC” for the
first time, the terms of service are displayed. It is necessary to agree to
the terms of service to use this feature.
Connecting an Android device with JVC’s Mirroring OA App installed Connect an
Android device with JVC’s Mirroring OA App installed via both USB and
Bluetooth connection (page 7).
Starting USB Mirroring
Preparation: · Unlock your Android device beforehand. · Make sure that the
JVC’s Mirroring OA App is
installed. · Be sure [Mirroring for Android] is selected for
the
1 Connect the Android device.
1 Connect the device with Bluetooth. Pair the device with the unit via
Bluetooth. See “Pairing a Bluetooth device” on page 7. Select [USB
Mirroring] on the profile setting of the
2 Then, connect the device with USB.
Then follow steps 2 to 4 below on the Android device screen:
2 Touch the icon of JVC’s Mirroring OA App.
3 Touch [OK] to start JVC’s Mirroring OA
App.
4 Touch [Start now] to capture the Android
device screen to the screen of this unit.
5 Touch [USB Mirroring].
On the source/option selection screen (page 11).
Camera
Apps
Now Playing Bluetooth Audio
SETUP
Apple CarPlay Android Auto Bluetooth Audio Phone
USB
AV-IN
Tuner
SiriusXM USB Mirroring HDMI
AV Off
Maestro
Power Off
The Android device screen is displayed on the monitor screen of this unit. You can access your Android device from this unit.
To exit the Android device screen Press the / button on the monitor panel.
16 ENGLISH
USB
Playback operations Starting playing the USB
All files in the USB device will be played repeatedly until you change the
source or disconnect the USB device.
· When no USB device is connected: Connect a USB device to the USB terminal.
The playback source changes to [USB] and playback starts. · When a USB device
is already connected: Select [USB] as the source. From the Home screen (page
4), touch as follows:
Playback information and key operation
USB
1 Displays/hides the following operation keys
[ ][ ] Selects a folder. [ ] [MODE]
Selects repeat playback mode by touching repeatedly.*
Displays the
2 Jacket picture (artwork) is shown if any 3 Playing time/playback status 4
Content information
· Touching [ < ] scrolls the text if not all of the text is shown.
5 Operation keys
[ ]
Displays the
[ ]
Displays the search method selection
window.
[S]/[T] · (Touch) Selects a file. · (Hold) Reverses/forwards search. [IW]
Starts/pauses playback.
[ ]
Selects random playback mode.*
6 Repeat/Random mode indicator 7 File type indicator (MUSIC/MOVIE/PICTURE) 8
Playlist (PLIST) indicator: displayed when Category
List/Link Search is selected. 9 Current playback file information
(file type/folder no./file no.)
Selecting the file type to play
You can specify the file type to play.
USB
File type Audio
Select the file type as follows:
[Audio] [Video] [Photo]
Plays back audio files. Plays back video files. Plays back still picture files (Slide Show).
· If the USB contains no files of the selected type, the message “No File” appears. In this case, select the correct file type.
- You cannot activate repeat playback mode and random playback mode at the same time.
ENGLISH 17
USB
Video playback operations
While watching a video, you can use the following features.
Touch screen operations
Touching the numbered areas above performs the following actions: 1 Displays
the video menu control. 2 Displays the video source control screen. 3 Goes to
the previous file. 4 Goes to the next file.
Video menu control
Menu Control
Touching the operation keys performs the following actions:
1
[ ]
Displays the
· Touch [ Aspect] to select the aspect
ratio.
4:3 signal
16:9 signal
[ ]
Displays the
turn on or off the dimmer. 2 Touch [+]/[] to adjust the other
items. ·
(10 to +10). ·
(15 to +15). ·
(10 to +10). ·
Video source control screen
USB
4:3 signal
16:9 signal
1 File type 2 Playback status 3 Current playback folder no.file no. 4 Playing time 5 Playback mode indicator (Repeat/Random)
18 ENGLISH
Tuner
Listening to the radio
This unit alarms you emergency when receiving an alarm signal from FM
broadcast. Select [Tuner] as the source. From the Home screen (page 4), touch
as follows:
The last station you selected is tuned in, and the source control screen for
the station is displayed.
Playback information on the source control screen
TUNER
1 Selects the band (AM/FM1/FM2/FM3) · Each time you touch [FM], FM band
changes in order of FM1, FM2, and FM3.
2 Station information area · Touching [ < ] scrolls the text if not all of the
text is shown. · Touching [Radio Text] switches between [Radio Text], [Radio
Text Plus] and [PTY].
3 Current station frequency 4 Displays the preset stations window (page 20)
· To hide the window, touch [ > ]. 5 [P1] [P5] · (Touch) Selects a preset
station. · (Hold) Presets the current station. 6 Displays/hides the following
operation keys
[SSM ]
(For FM stations) (Hold) Presets the stations automatically.
[MONO]
(For FM stations) Activates monaural mode for better FM reception (stereo effect will be lost). The MONO indicator lights up. · To deactivate, touch [MONO] again.
[TI]
(For FM RDBS stations)
Activates TI Standby Reception mode.
· When TI is activated, the unit
is ready to switch to Traffic
Information if available. The TI
indicator lights up in white.
· If the TI indicator lights up in
orange, tune in to another station
providing Radio Broadcast Data
System signals.
· The volume adjustment made for
Traffic Information is automatically
memorized and used.
· To deactivate, touch [TI] again.
[MODE]
(For FM stations) Displays the
7 Indicators · TI: Lights up white when receiving the traffic information, and
lights in orange when TI Standby Reception is on standby. · ST: Lights up when
receiving a stereo broadcast. · MONO: Lights up when receiving stations in
monaural forcibly. · AUTO1/AUTO2/MANU: Seek mode indicator
8 Operation keys
[ ] [PTY]
Displays the
(For FM RDBS stations) Enters PTY search mode. 1 Touch [PTY]. 2 Touch and hold
a PTY code to
search for. If there is a station broadcasting a program of the same PTY code
as you have selected, that station is tuned in.
[SEEK] [S]/[T]
Selects the seek mode for [S]/ [T]. · AUTO1 (Initial): Auto search · AUTO2:
Tunes in preset stations
one after another · MANU: Manual search
Searches for a station. · The search method differs
according to the selected setting for [SEEK] (see above).
ENGLISH 19
Tuner
Presetting stations in the memory
You can preset five stations each for AM and FM1/ FM2/FM3.
Automatic presetting — SSM (Strongstation Sequential Memory) (For FM only)
1 Select the FM band (1 3)
On the source control screen: FM1 FM3
2 Start SSM.
(Hold) The local stations with the strongest signals are found and stored
automatically.
Manual presetting
1 Select the band, and then tune in to a
station you want to preset. On the source control screen:
FM1 FM3
2 Select a preset number to store into.
TUNER AM FM1
P1
FM1
P2
FM1
P3
FM1
P4
FM1
P5
FM1
(Hold)
The station selected in step 1 is stored into the preset number [P1] to [P5] you have selected.
Selecting a preset station
1 Select the band, and then display the
preset station window. On the source control screen:
FM1 FM3
2 Select a preset station.
TUNER
AM FM1
P1
FM1
P2
FM1
P3
FM1
P4
FM1
P5
FM1
· To show the details of the item, touch [ < ]. · You can also select a preset
channel by touching
[P1] [P5].
To hide the window: Touch [ > ].
20 ENGLISH
Bluetooth® Device
You can use the mobile phone and portable audio player connected through
Bluetooth · While using Apple CarPlay, Android Auto, or USB
Mirroring, use their features for hands-free phones and audio playback. (The
Bluetooth device currently connected is disconnected when an iPhone with Apple
CarPlay or an Android device with Android Auto is connected.)
Bluetooth mobile phone
When a call comes in, this unit automatically enters [Phone], and when it
ends, go back to the previous source.
When a call comes in…
Note · While driving, do not perform complicated
operations such as dialing numbers, using the phone book, etc. When you
perform these operations, stop your car in a safe place. · To use the
Bluetooth function, you need to turn on the Bluetooth function of the device.
· Some Bluetooth devices may not be used with this unit depending on the
Bluetooth version of the device. · When a Bluetooth mobile phone is connected,
the signal strength and battery level are displayed when the information is
acquired from the device. · If your mobile phone supports PBAP (Phone Book
Access Profile), you can display the following items on the touch panel when
the mobile phone is connected. Phone book Dialed calls, received calls,
and missed calls (up to
100 entries in total) · Two devices for Bluetooth mobile phone and one for
Bluetooth audio can be connected at a time. However, when [Bluetooth Audio] is
selected as the source, you can connect up to five Bluetooth audio devices and
switch between these five devices.
1 Device Name 1
2 Device Name 2
Incoming Call
Name 1234XXXXXX
1 Phone device information · Either hands-free phone 1 or 2 is highlighted to indicate which phone is ringing when a call comes in.
Touching the operation keys performs the following actions:
[ ] [ ]
Answers a call. Rejects a call.
· Call information is displayed if acquired. · Phone operation is not
available while the picture
from any camera is displayed.
During a call…
1 Device Name 1
Talking…
2 Device Name 2
Name 1234XXXXXX
NR LEVEL 0 +
EC LEVEL 0 +
DTMF MIC LEVEL 0 +
Touching the operation keys performs the following actions:
[ ] [
]/
[
] [DTMF]
NR LEVEL [] / [+] EC LEVEL [] / [+] MIC LEVEL [] / [+]
Ends a call.
Switches between hands-free mode and phone mode.
Enters DTMF (Dual Tone Multi Frequency). You can send a text using the keypad.
Adjusts the noise reduction level. (5 to 5) Adjusts the echo volume level.
(5 to 5) Adjusts the volume level of the microphone. (10 to 10)
· Press volume + / buttons on the monitor panel to adjust the volume of the call or earpiece.
ENGLISH 21
Bluetooth® Device
Making a call
1 Display the phone control screen.
From the Home screen (page 4), touch as follows:
2 Select which phone to use if two mobile
phones are connected.
1 Device Name 1
2 Device Name 2
1234XXXXXX
X
1
2
3
4
5
6
7
8
9
0/+
The currently active device is highlighted. * Displays the
3 Select a method to make a call (1 5).
1 Device Name 1
2 Device Name 2
1234XXXXXX
X
1
2
3
4
5
6
7
8
9
0/+
1 From the call history (missed calls/received calls/dialed calls)
2 From the phone book 3 From the preset list (page 23) 4 Use direct number
entry 5 Use voice dialing
- Applicable only for mobile phone compatible with PBAP (Phone Book Access Profile).
4 Select a contact (1), then make a call (2).
· When item 1, 2 or 3 is selected in step 3:
1 Device Name 1
2 Device Name 2
Name 1 1234XXXXXX
Name 1 2345XXXXXX
Name 3
3456XXXXXX
A-Z
Name 4
4567XXXXXX
Name 5 8901XXXXXX
To use alphabet search in the phone book 1 Touch [ A-Z]. 2 Touch the first
letter you want to search for on
the keypad. To search for a number, touch [1,2,3…]. 3 Select a contact you
want to call from the list.
Phone book search results: “Sort order”, “display order” or any other
equivalent settings of the phone may affect and show different search results
(page display).
To display other phone numbers in the same contact You can store up to ten phone numbers per contact. 1 Touch [> ]. 2 Select a contact you want to call from the list.
· When item 4 is selected in step 3:
Enter the phone number (1), then make a call (2).
1 Device Name 1
2 Device Name 2
1234XXXXXX
X
1
2
3
4
5
6
7
8
9
0/+
· To enter “+”, touch and hold [0/+]. · To delete the last entry, touch [ X ].
· When item 5 is selected in step 3:
Say the name of the person you want to call. · Available only when the
connected mobile
phone has a voice recognition system. · If the unit cannot find the target,
“Please speak
into the microphone” appears. Touch [Start], and then say the name again. · To
cancel voice dialling, touch [Cancel].
22 ENGLISH
Bluetooth® Device
Presetting phone numbers
You can preset up to five phone numbers.
1 Display the phone control screen.
From the Home screen (page 4), touch as follows:
2 Select which phone to use if two mobile
phones are connected.
1 Device Name 1
2 Device Name 2
1234XXXXXX
X
1
2
3
4
5
6
7
8
9
0/+
The currently active device is highlighted. * Displays the
3 Select call history or phone book (1), and
then select a contact (2) to preset.
1 Device Name 1
2 Device Name 2
Name 1 1234XXXXXX
Name 1 2345XXXXXX
Name 3
3456XXXXXX
A-Z
Name 4
4567XXXXXX
Name 5 8901XXXXXX
4 Select a preset number to store into.
1 Device Name 1
2 Device Name 2
1234XXXXXX
2345XXXXXX
3456XXXXXX
No preset
No preset
(Hold)
To delete the contact in the preset number: Touch [ ] besides the contact on the preset list.
Bluetooth audio player
Select [Bluetooth Audio] as the source. From the Home screen (page 4), touch
as follows:
The
1 Jacket picture (artwork) is shown if any 2 Playing time/playback status 3
Tag data* (current file title/artist name/album title)
· Pressing [ < ] scrolls the text if not all of the text is shown.
4 Signal strength and battery level (Appear only when the information is
acquired from the device.)
5 Device name · Touching the device name shows the
6 Displays/hides other available operation keys
[ ]
Selects random playback mode.
[ ] [ ]
Selects repeat playback mode by touching repeatedly.
Displays
7 Operation keys
[ ]
Displays the
[ ] [S]/[T] [I] [W]
Displays the category list. · (Touch) Selects a file. · (Hold) Reverses/forwards search. Starts playback. Pauses playback.
8 Repeat mode indicator 9 Random mode indicator
- Available only for devices compatible with AVRCP 1.3.
ENGLISH 23
Audio Settings
1 Display the
Then, on the
Settings Audio Equalizer Display Sound Effect Input Fader / Balance System Speaker / X’over Key Time Alignment
Enter Enter Enter Enter Enter
2 Adjust the item.
The
Selecting a preset sound mode
Select a preset sound mode on the
Flat (Initial)/Bass Boost/User1/User2/User3/User4
Equalizer SRC Name
Preset
Flat
[dB] +9 +7 +5 +3
0 -3 -5 -7 -9
62.5 100 160 250 400 630 1k 1.6k 2.5k 4k 6.3k 10k 16k [Hz]
Bass EXT ON OFF
SW Level
0
EQ INIT ALL SRC
24 ENGLISH
Audio Settings
<Fader/Balance>
Touch [J]/[K]/[H]/[I] or drag the mark to adjust.
Other Information
For playback operations of SiriusXM® Radio sources and other settings
information, refer to the INSTRUCTION MANUAL on the following website:
https://www.jvc.net/cs/car/ · The availability of each source vary depending
on
the model.
Note for specifications
Bluetooth Frequency Range: 2.402 GHz — 2.480 GHz
Speaker Impedance: 4 — 8
Operating Voltage: 12 V DC car battery
ENGLISH 25
Installation and Connection
This section is for the professional installer. For safety’s sake, leave
wiring and mounting to professionals. Consult the car audio dealer.
WARNINGS
· DO NOT connect the ignition wire (red) and the battery wire (yellow) to the
car chassis (ground), you may cause a short circuit, that in turn may start a
fire.
· DO NOT cut out the fuse from the ignition wire (red) and the battery wire
(yellow). The power supply must be connected to the wires via the fuse.
· Always connect the ignition wire (red) and the battery wire (yellow) to the
power source running through the fuse box.
CAUTIONS
· Install this unit in the console of your car. · Do not touch the metal parts
of this unit during and
shortly after the use of the unit. Metal parts such as the heat sink and
enclosure become hot. · When parking at a low ceiling area, turn off the unit
to store the antenna. As when the unit is installed in the car with the
function of auto antenna; the radio antenna extends automatically when you
turn on the unit with the antenna control wire (ANT. CONT) connected. (Page
30)
Before installation
Precautions on installation and connection
· Mounting and wiring this product requires skills and experience. For best
safety, leave the mounting and wiring work to professionals.
· Mount the unit so that the mounting angle is 30° or less.
· Make sure to ground the unit to a negative 12 V DC power supply.
· Do not install the unit in a location exposed to direct sunlight or
excessive heat or humidity. Also avoid places with too much dust or the
possibility of water splashing.
· Do not use your own screws. Use only the screws provided. If you use the
wrong screws, you could damage the unit.
· After the unit is installed, check whether the brake lamps, blinkers,
wipers, etc. on the car are working properly.
· Do not press hard on the panel surface when installing the unit to the car.
Otherwise scratches, damage, or failure may result.
· If the power is not turned on (“Miswiring DC Offset Error”, “Warning DC
Offset Error” is displayed), the speaker wire may have a short circuit or have
touched the chassis of the car and the protection function may have been
activated. In this case, the speaker wire should be checked.
· Keep all cables away from heat dissipating metal parts.
· If your car’s ignition does not have an ACC position, connect the ignition
wires to a power source that can be turned on and off with the ignition key.
If you connect the ignition wire to a power source with a constant voltage
supply, such as with battery wires, the battery may be drained.
· If the fuse blows, first make sure the wires are not touching to cause a
short circuit, then replace the old fuse with one with the same rating.
· Insulate unconnected wires with vinyl tape or other similar material. To
prevent a short circuit, do not remove the caps and do not let the cable out
at the ends of the unconnected wires or the terminals.
· Secure the wires with cable clamps and wrap vinyl tape around the wires that
comes into contact with metal parts to protect the wires and to prevent short
circuit.
· Connect the speaker wires correctly to the terminals to which they
correspond. The unit may be damaged or fail to work if you share the · wires
or ground them to any metal part in the car.
· When only two speakers are being connected to the system, connect both
connectors either to the front output terminals or to the rear output
terminals (do not mix front and rear). For example, if you connect the ª
connector of the left speaker to a front output terminal, do not connect the ·
connector to a rear output terminal.
26 ENGLISH
Installation and Connection
Parts list for installation
Note: This parts list does not include all the package contents.
¥ Wiring harness (× 1) ø Extension wire, 2 m (× 1) Flat head screws, M5 × 8 mm
(× 6) [ Round head screws, M5 x 8 mm (× 6) ” Microphone, 3 m (× 1) ] Trim
plate (× 1) ` Mounting sleeve (× 1) Extraction keys (× 2) « GPS antenna, 3.5 m
(× 1) Å Metal plate (× 1)
Installation procedure
1 Remove the key from the ignition and
disconnect the · battery.
2 Make the proper input and output wire
connections for each unit.
3 Connect the speaker wires of the wiring
harness.
4 Connect the wires of the wiring harness
in the following order: ground, battery, ignition.
5 Connect the wiring harness to the unit.
6 Install the unit in your car.
Make sure that the unit is installed securely in place. If the unit is
unstable, it may malfunction (e.g., the sound may skip).
7 Reconnect the · battery. 8 Initialize the unit. 9 Configure <Initial
Settings> (page 5).
Installing the unit using the mounting sleeve
`
Installing the unit
Installing the unit using the mounting bracket removed from the car
/ [
Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and
attach it in place.
Installing the trim plate
]
/ [
Car bracket*
Note: Select the appropriate screws (supplied) for the mounting bracket. * Shape of your car brackets may differ.
ENGLISH 27
Installation and Connection
Removing the unit
1 Remove the trim plate (]) by inserting the
two extraction keys () as illustrated.
]
3 Insert the extraction keys () deeply into
the slots on each side.
2 When the lower level is removed, remove
from the upper two catches of the trim plate (]).
4 Lower the extraction keys () toward the
bottom, and pull out the unit halfway while pressing towards the inside.
Installing the supplied GPS antenna
GPS antenna is installed inside of the car. It should be installed as
horizontally as possible to allow easy reception of the GPS satellite signals.
1 Clean your dashboard or other surface. 2 Remove the separator of the metal
plate
(Å).
3 Press the metal plate (Å) down firmly
on your dashboard or other mounting surface. You can bend the metal plate (Å)
to conform to a curved surface, if necessary.
4 Remove the separator of the GPS antenna
(«), and stick the antenna to the metal plate (Å).
«
Å
The frame can be removed from the top side in the same manner.
Be careful to avoid injury from the catch pins on the extraction key.
5 Pull the unit all the way out with your
hands, being careful not to drop it.
28 ENGLISH
Installation and Connection
Notes on using the supplied GPS antenna («) · Use the supplied GPS antenna
(«). Using the GPS
antenna other than the supplied one may cause a drop in positioning accuracy.
· Depending on the type of car, reception of the GPS satellite signals might
not be possible with an inside installation. · Please install the supplied GPS
antenna («) in an area away from any antennas that are used with CB radios or
satellite televisions. · The supplied GPS antenna («) should be installed at a
position that is spaced at least 30 cm (12 inch) from mobile phone or other
transmitting antenna. Signals from the GPS satellite may be interfered with by
these types of communication. · Painting the supplied GPS antenna («) with
(metallic) paint may cause a drop in performance.
Connecting external components
FRONT VIEW CAMERA
1 GPS antenna input (GPS) (page 28) 2 HDMI terminal 3 Rear view camera input
(R-CAM) 4 Video output (V-OUT) 5 Audio video input (AV-IN) 6 iDatalink input
for connecting an ADS adapter
(commercially available) 7 Expansion port for connecting SiriusXM Connect
Vehicle Tuner (EXT I/F) (commercially available) 8 Front view camera input 9
Microphone input (MIC) (page 30) p Antenna terminal q USB terminal w Output
terminals*
· Left output (White) · Right output (Red)
REAR: Rear speaker preouts FRONT: Front speaker preouts SW: Subwoofer preouts
For 3-way crossover: REAR: Tweeter preouts FRONT: Mid range speaker preouts
SW: Subwoofer preouts
- When connecting an external amplifier, connect its ground wire to the chassis of the car; otherwise the unit may be damaged.
2 Use HDMI cable KS-U70 (optional accessory).
W: 11.1 mm or less
W
H: 7.7 mm or less
H D
D: 21.5 mm or less
When you connect the cable to HDMI terminal, detach the fixture. After
connecting the cable, attach the fixture back using the screw.
HDMI cable
Fixture
5 Connect the following type of 4-pole mini plug:
13 24
1 Left audio 2 Right audio 3 Ground 4 Composite video
7 Antenna
SiriusXM Connect Vehicle Tuner (Commercially available)
(USB1)5V 1.5A
ENGLISH 29
Installation and Connection
Wiring connection
FRONT VIEW CAMERA
Connect to the video out terminal of the front camera
”
10 A fuse
¥
Purple with white stripe
Light green
REVERSE
White ] / White with black stripe [ PRK SW
Gray ] / Gray with black stripe [
Green ] / Green with black stripe [
Purple ] / Purple with black stripe [
Orange with white stripe
Light blue with yellow stripe Blue with white stripe (12 V 350 mA) Red (Ignition wire) Yellow (Battery wire) Black (Ground wire)
STEERING WHEEL REMOTO INPUT REMOTE CONT
ANT.CONT P.CONT
30 ENGLISH
Connect the antenna cord to the antenna terminal
USB terminal (1 m)
(USB1)5V 1.5A
Connect a USB device
To the car’s reverse lamp harness
when using the optional rear view camera
To the car’s parking brake detection switch harness
Extension wire ( ø )
(For best safety, be sure to connect the parking sensor.)
To front speakers (left) / Mid-range speakers (left) for 3-way crossover
To front speakers (right) / Mid-range speakers (right) for 3-way crossover To rear speakers (left) / Tweeters (left) for 3-way crossover To rear speakers (right) / Tweeters (right) for 3-way crossover To the car light control switch
To the steering wheel remote control adapter (not supplied)
To the power control terminal when using the optional power amplifier (Or) To
the control terminal of the motor antenna or to the power terminal for the
booster amplifier of film-type antenna
Ignition key switch
References
- Android Auto | Android
- dtsc.ca.gov/hazardouswaste/perchlorate
- iOS - CarPlay - Apple
- Android Auto | Android
- JVC