dreame L10s Robot Vacuum and Mop User Manual

dreame L10s Robot Vacuum and Mop

Product Information

The Dreame Robot Vacuum and Mop is a smart cleaning device manufactured by Dreame Trading (Tianjin) Co., Ltd. It is designed to provide efficient cleaning for your home environment. The robot features advanced technology and sensors to navigate and clean various surfaces. The product is compliant with Directive 2014/53/EU and meets safety standards.

Key Features:

• Robot Vacuum and Mop
• Wi-Fi connectivity
• Main brush for thorough cleaning
• Dust bin and water tank for debris and mopping
• Multiple sensors for obstacle avoidance and navigation
• Charging dock for convenient charging

Accessories included:

• Main brush
• Side brush
• Cleaning tool
• Dust bin
• Water tank
• Power cord
• Charging dock

Product Usage Instruction

Safety Information:

• Read the user manual carefully before using the product and keep it for future reference.
• Cleaning and maintenance should not be performed by children without supervision.
• Keep a safe distance from the robot while it is operating.
• Do not use the robot on non-floor surfaces or in a commercial or industrial setting.
• Contact aftersales@dreame.tech for after-sales service.

Batteries and Charging:

• Follow the instructions in the user manual for proper battery usage and charging.

Product Overview:

• The robot is equipped with various sensors, including laser distance sensor, cliff sensors, edge sensor, and 3D obstacle avoidance sensor.
• The main brush, side brush, dust bin, and water tank are pre-installed accessories for cleaning.
• The charging dock is used to charge the robot.

Clearing Home Environment:

• Before using the robot, make sure to put away any loose cords, rags, slippers, toys, etc. to improve its working efficiency.

The word “dreame” is the abbreviation of Dreame Technology Co., Ltd. and its subsidiaries in China. It is the transliteration of the company’s Chinese name “追觅”, which means striving for excellence in every endeavor and reflects the company’s vision of continuous pursuit, exploration and search in technology.

Safety Information

Read this manual carefully before use and keep it for future reference.

Usage Restrictions

• This product should not be used by children younger than 8 years old nor persons with physical, sensory, intellectual deficiencies, or limited experience or knowledge without the supervision of a parent or guardian to ensure safe operation and to avoid any risks. Cleaning and maintenance shall not be performed by children without supervision.
• Children shall not play with this product. Ensure children and pets are kept at a safe distance from the robot while it is operating.
• This product is for floor cleaning in a home environment only. Do not use it outdoors, on non-floor surfaces, or in a commercial or industrial setting.
• If the power cord becomes damaged or broken, stop using it immediately and contact after-sales service.
• Do not use the robot in an area suspended above ground level without a protective barrier.
• Do not place the robot upside down. Do not use the LDS cover, robot cover, or bumper as a handle for the robot.
• Do not use the robot at an ambient temperature above 40° C or below 0° C or on a floor with liquids or sticky substances.
• Pick up any cables from the floor before using the robot to prevent it from dragging them while cleaning.
• Remove fragile or small items from the floor to prevent the robot from bumping into and damaging them.
• To prevent damage or harm from dragging, clear any loose objects from the floor, and remove cables or power cords on the cleaning path before operating the appliance.
• Keep hair, fingers, and other body parts away from the suction opening of the robot.
• Keep the brush cleaning tool out of reach of children.
• Do not place children, pets, or any item on top of the robot regardless of whether it is stationary or moving.
• Do not use the robot to clean any burning objects.
• Do not vacuum hard or sharp objects.
• Make sure the robot is turned off and the charging dock is unplugged before cleaning or performing maintenance.
• Do not use a wet cloth to wipe or any liquid to rinse the robot and charging dock. Washable parts must be dried completely before installing and using them.
• Make sure the robot is turned off when being transported and kept in its original packaging if possible.
• Please use this product in accordance with the instructions in the User Manual. Users are responsible for any loss or damage that arise from improper use of this product.

Batteries and Charging

• Do not use any third-party battery, charger, or charging dock. Use only with RCS0 supply unit.
• Do not attempt to disassemble, repair, or modify the battery or charging dock on your own.
• Do not place the charging dock near a heat source.
• Do not use a wet cloth or wet hands to wipe or clean the dock’s charging contacts.
• Do not improperly dispose of old batteries. Unneeded batteries should be discarded at an appropriate recycling facility. · If the robot will not be used for an extended period, fully charge it, then turn it off and store in a cool, dry place. Recharge the robot at least once every 3 months to avoid over-discharging the battery.
• This product contains batteries that can only be replaced by qualified technicians or after-sales service.
• The lithium-ion battery pack contains substances that are hazardous to the environment. Before disposing of the robot vacuum, please first remove the battery pack, then discard, or recycle it in accordance with local laws and regulations of the country or region it is used in.
• When removing the batteries from the product, it is better to use up the batteries and make sure your product is disconnected from power. Uninstall the screw on the bottom, then remove the cover.
• Unplug the battery connector, then remove the batteries. Do not damage the battery case to avoid any risk of injuries.
• Return the batteries to a professional recycling organization.

Laser Safety Information

• The laser distance sensor complies with the IEC 60825-1:2014 standard for Class 1 laser products and does not generate dangerous laser radiation.

Hereby, Dreame Trading（Tianjin）Co., Ltd. declares that the radio equipment type RLS6L is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://global.dreametech.com
For detailed e-manual, please go to https://global.dreametech.com/pages/user- manuals-and-faqs

Product Overview

Accessories

Pre-Installed Accessories

Other Accessories

Robot

Cliff Sensors

Robot Sensors

Dust Bin

Water Tank

Charging Dock

Mopping Module

Clearing Home Environment

• To improve the working efficiency of your robot, put away any loose cords, rags, slippers, toys, etc.
• Before cleaning, place a physical barrier at the edge of the stairs and sofa to ensure safe and smooth operation of the robot.
• Open the door of the room to be cleaned, and put the furniture in its proper place to make more space.
• To prevent the robot from not recognizing the area to be cleaned, do not stand in the front of the robot, threshold, hall way, or narrow places.

Preparation Before Use

1. Remove the protective strips

2. Install the side brush Note: Install the side brush until it clicks into place.

3. Set up the charging dock
   Stick the double-sided tape at the bottom of the charging dock, then place the dock on the level ground against the wall and connect it to a power outlet. Note:

   • Keep the immediate area 1.5m in front of the charger and 0.5m to both sides of the charging dock clear of objects.
   • To ensure you can connect to the robot with your phone well, make sure the robot and charging dock are within WiFi range.
   • Do not place the charging dock in an area with direct sunlight or where other objects might block the signal, as this may hinder the robot from returning to the charging dock.
   • Please clean the floor area where the charging dock will be placed with a dry rag.
   • Use of the double-sided tape is based on your need.
   • If necessary, remove the double-sided tape slowly to reduce adhesive residue.

4. Place the robot onto the charging dock to charge .Note:

   • Fully charging is recommended before first-time use.
   • Do not install the mopping module while charging. Be extra careful with the wet mop as it can damage the floor.

Connecting with Mi Home/Xiaomi Home App

The appliance works with the Mi Home/Xiaomi Home app, which can be used to control the appliance and make it interact with other smart devices.

1. Download the Mi Home/Xiaomi Home App
   Scan the QR code on the robot or search “Mi Home” or “Xiaomi Home” in the app store to download and install the app.

2. Add Device
   Open the Mi Home/Xiaomi Home app, tap “ ” in the upper right, and scan the QR code above again to add “DreameBot L10s Pro”. Please follow the prompts to finish the Wi-Fi connection. Note:

   • Only 2.4GHz Wi-Fi is supported.
   • The version of the app might have been updated, please follow the instructions based on the current app version.

3. Reset Wi-Fi
   Simultaneously press and hold the buttons and until you hear a voice to indicate that the robot is waiting for the network configuration. Once the Wi- Fi indicator is blinking slowly, the Wi-Fi has been successfully reset . Note: If your robot cannot connect to the app successfully, reset the Wi-Fi and add the device again.

How to Use

1. Turn On/Off
   Press and hold the button for 3 seconds to turn on the robot. Once the power indicator turns solid white, the robot is in standby mode. To turn off the robot, press and hold the button for 3 seconds when the robot is not moving. Turning off the robot will end the current cleaning task.

2. 3. Start Cleaning
      Press the button briefly to turn on the robot. Upon activation, the robot will accurately map out a route, methodically clean along the edges and walls, then finish by cleaning each room in an S-shaped pattern to ensure a thorough job . Note:
   • Before a cleaning task, make sure the robot is fully charged and starts from the charging dock. Do not move the charging dock while the robot is cleaning.
   • If the battery is too low, the robot will automatically return to the dock to charge. It will resume unfinished cleaning tasks after charged to the necessary battery level. (The breakpoint continuous cleaning function must be enabled on the app in advance.)

3. Cleaning Mode
   DreameBot L10s Pro has four cleaning modes: Quiet, Standard, Strong and Turbo. The default mode is Standard. You can specify the cleaning mode in the app.

4. Pause/Sleep Mode
   Pause: Press any button to pause the robot during cleaning. Sleep Mode: The robot will automatically enter Sleep Mode after 10 minutes of inactivity, then the power and charging indicators will go off. To wake up the robot, press any button.
   Note:

   • The robot will turn off automatically if left in Sleep Mode for more than 12 hours.
   • When the robot is paused, placing it onto the charging dock will end the current cleaning task.

5. Do Not Disturb (DND) Mode
   DND Mode prevents the robot from automatically starting cleaning tasks, and the power indicator remains off. You can enable DND Mode or modify its hours in the app. (The mode is on by default from 22:00 to 08:00.)
   Note:

   • Scheduled cleaning tasks will still be carried out during the DND period.
   • The robot will continue cleaning after the DND period ends.

6. Spot Clean Mode
   When the robot is paused or in Standby Mode, press and hold the button for 3 seconds to start Spot Clean Mode. In this mode, it will clean a square-shaped area of 1.5 ×1.5 meters directly around the robot. When the spot cleaning is done, the robot will automatically return to its original location and power of note : When the robot is paused, activating Spot Clean Mode will end the current cleaning task.

7. Scheduled Cleaning
   You can schedule cleaning time in the app. The robot will automatically start cleaning at the designated time and then return to the charging dock to recharge when the cleaning is done.

8. Additional App Functions
   Follow the instructions on the app interface to use more functions. The version of the app might have been updated; please follow the instructions based on the current app version.

9. Use the Mopping Function
   It is recommended that all floors are vacuumed at least three times before the first mopping session to achieve a better cleaning effect.

10. Dampen the mop pad, wring out excess water, and stick them onto the mop pad holder firmly. Then install the mopping module on the robot.

11. Remove the water tank and fill it with water as shown in the figure, then put it back into place. Note:

  * Do not fill with hot water, which may cause distortion of the water tank.
  * Do not expose the tank to the sun directly.
  * If slow water flow occurs, or the outflow is not well-distributed, please clean the air hole in the tank.
3. Press the button or use the app to start cleaning. **Note:**
  * It is not recommended to use the mopping function on carpets.
  * Use the app to adjust the water flow as required.
4. After cleaning task is done, remove the mop pad as shown in the diagram. To remove the water tank, press and hold the release clip on both sides, and drag them upward. **Note:** When the robot is charging or not in use, remove the mopping module, pour out all the remaining water in the tank, and clean the mop pad to prevent mildew or odor.

Routine Maintenance

Dust Bin

1. Open the robot cover, then press the dust bin clip to remove the dust bin.
2. Open the bin cover and empty the dust bin.

Filter

It is recommended to clean it every 2 weeks.

1. Remove the filter and tap its basket gently. Note: Do not attempt to clean the filter with a brush or finger.
2. Rinse the dust bin and filter with water until it is clean. Thoroughly dry them before re-installing. Note:
   • Rinse the filter with clean water only. Do not use any detergents.
   • Use the dust bin and filter only when they are completely dry.

Mop Pad
Clean after each use.

1. Remove the mop pad from the mop pad holder.
2. Clean the mop pad with water only and leave to air dry before re-installing. Note: For optimal performance, it is recommended to replace the mop pad every 3 to 6 months.

Clean the Main Brush

1. Press the brush guard clips inwards to remove the brush guard and lift the brush out of the robot.
2. Pull out the brush covers as shown in the diagram. Use the included cleaning tool to remove any hairs tangled in the brush. Note: Do not pull out the hair excessively to avoid damaging the main brush when the hair is tightly tangled in the main brush.

Clean the Side Brush
Pull out the side brush and use the included cleaning tool to remove any hair tangled on the brush.

Clean the Main Wheel/Omnidirectional Wheel

Clean the LDS/Edge Sensor

Clean the High Precision 3D

Note: Wet cloths can damage sensitive elements within the robot and charging dock. Please use dry rags for cleaning.

Clean the Carpet Sensor

Clean the Cliff Sensor

Clean the Charging Contact

Note : Wet cloths can damage sensitive elements within the robot and charging dock. Please use dry rags for cleaning.

Robot Restarting
If the robot stops responding or cannot be turned off, press and hold down the button   for 6 seconds to forcefully turn it off. Then press and hold the button   for 3 seconds to turn the robot on.

Battery
The robot contains a high-performance lithium-ion battery pack. Please ensure that it remains well-charged for daily use to maintain optimal battery performance. If the robot is not used for an extended period of time, turn it off and put it away. To prevent damage from over-discharging, the robot should be recharged at least once every three months.

FAQ

Robot does not turn on

| Battery level is low. Recharge the robot at the charging dock, then try again.

The ambient temperature is too low (below 0°C) or too high (above 40°C). The operating temperature of the robot is 0°C to 40°C.

Robot does not recharge| The charging dock is not receiving power. Please confirm that both ends of the power cord are plugged in correctly. Poor contact. Clean the charging contacts of the charging dock and the robot.
Robot does not return to charging dock| There are too many obstructions around the charging dock. Place the charging dock in a more open area. Please clean the dock’s signaling area.
Robot is malfunctioning| Turn off the robot and then reactivate it.
Robot is making a strange noise| A foreign object may be caught in the main brush, side brush, or one of the main wheels. Stop the robot and remove any debris.
Robot no longer cleans efficiently or leaves dust behind| The dust bin is full. Please clean it. The filter is blocked. Please clean it.

A foreign object is caught in the main brush. Please clean it.

Robot cannot connect to Wi-Fi

| There is something wrong with the Wi-Fi connection. Reset the Wi-Fi and download the latest version of the app, then try reconnecting.

Location permission is not open. Please ensure the location permission on the app is enabled. Wi-Fi signal is weak. Make sure the robot is in an area with good Wi-Fi coverage.

5GHz Wi-Fi is not supported. Please ensure your robot connects to 2.4GHz Wi- Fi.

The username or password of Wi-Fi is incorrect. Please enter the correct username and password.

Robot does not perform scheduled cleaning|

Robot has low battery. Scheduled cleaning will not start unless the robot has at least 15% battery left.

Does leaving the robot on the charging dock consume power if it is already fully charged?| Leaving the robot on the charging dock after it’s fully charged consumes very little electricity and helps maintain optimal battery performance.

No water comes out of the water tank, or only a little bit comes out

| Confirm that the water tank is filled with water, and clean the mop pad if necessary. Clean the mop pad if it becomes dirty.

Make sure the mop pad is installed correctly according to the user manual. Clean the airhole on the top of the water tank.

The mop pad stops rotating| A foreign object is caught in the mop pad. Please clean it.
Robot doesn’t resume cleaning after charging| Make sure the robot is not set to Do Not Disturb Mode, which will prevent it from resuming cleaning. The robot does not resume cleaning when it is manually recharged or placed onto the charging dock.

Robot doesn’t return to charging dock after being moved

| Moving the robot may cause it to re-position itself or re-map its surroundings. If the robot is too far from the charging dock, it might not be able to automatically return on its own, in which case you need to manually place the robot onto the charging dock.

Specifications

Robot

Charging Dock

Under normal use of condition, this equipment should be kept a separation distance of at least 20cm between the antenna and the body of the user.

WEEE Information

All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.

For more support, contact us via aftersales@dreame.tech
Website: https://global.dreametech.com
Manufactured by: Dreame Trading (Tianjin) Co., Ltd.
Made in China

The illustrations in this manual are for reference only. Please refer to the actual product.

References

• Dreame Global | Smart Robot Vacuum Cleaners
• stiftung elektro-altgeräte register

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>