Blueair 311i Max Blue Pure Air Purifier User Manual

: June 12, 2024
: Blueair

Table of Contents

Blueair 311i Max Blue Pure Air Purifier
Safety Information
Safety information
Regulatory information
Product map
Getting started
How to use tips
Connect to the Blueair app
Maintenance information
Disposal and recycling
Troubleshooting
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Blueair 311i Max Blue Pure Air Purifier

Product Information

Product Name: Blue Pure 311i Max
Model Number: 3332111100
Product Type: Air purifier
Intended Use: Indoor use only

Safety Information

The Blue Pure 311i Max air purifier is an electrical appliance designed for indoor use only. To reduce the risk of fire, electric shock, or injury, it is important to take the necessary precautions while using the product.

Regulatory Information
Changes or modifications to this unit not expressly approved by the responsible party may void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, as per Part 15 of the FCC Rules. It is designed to provide reasonable protection against harmful interference in residential installations. However, there is no guarantee that interference will not occur in a particular installation.

If the equipment causes harmful interference to radio or television reception, the user is encouraged to try the following measures to correct it:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a different circuit from the receiver.
Consult the dealer or an experienced radio/TV technician for assistance.

This device also complies with Canadian ICES-003. The device contains license- exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). It should not cause interference and must accept any interference, including interference that may cause undesired operation. RF Exposure Information: The equipment should be installed and operated with a minimum distance of 20 centimeters between the
radiator and the user’s body.

Product Map

A – User interface
B – Air outlet
C – Air quality indicator (AQI)
D – Fan motor
E – Silencer
F – Particle & carbon filter
G – Washable fabric pre-filter

Product Usage Instructions

Getting started:
- Press the ON/Standby button (1) to turn on the air purifier.
- Adjust the mode and fan speed using the Fan Speed button (2).
- The air purifier has four fan speeds: Night mode (lowest and most silent), Speed 1, Speed 2, and Speed 3 (highest).

Safety information

Product name Model number
Blue Pure 311i Max 3332111100

Blue Pure 311i Max air purifier is an electrical appliance for indoor use only. Take the necessary precautions to reduce the risk of fire, electric shock or injury.

This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Supervise children to ensure that they do not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision. Always disconnect the appliance from the power supply before maintenance.
Do not attempt to open or service the appliance yourself, this can void your warranty. Service must be done by the manufacturer, service agent or similarly qualified personnel using only original Blueair spare parts.
Ensure that the power cable and the power plug are not at risk of getting damaged. To avoid hazards, a damaged power cable must always be replaced by the manufacturer, service agent or similarly qualified person.
If the appliance is damaged or malfunctions, turn it off, disconnect it from the power supply, and contact Blueair.
The power plug must be firmly inserted into the power socket.
When disconnecting the unit from the power supply, do not pull on the power cord, pull on the power plug.
Use the power cable provided with your Blueair air purifier to plug directly and firmly into an appropriate, electrical outlet.
Do not use an extension cord or a power strip. Refer to the rating label on your appliance. Do not alter the power plug in any way. If the plug does not fit into the outlet, contact qualified personnel to install the proper outlet.
Do not use the included power cord for anything else but the appliance.
Do not allow objects to enter or block the air inlets and air outlets as this can cause electric shock or damage the appliance.
Do not place any objects on top of or directly against the appliance.
Do not sit on, stand, climb onto or hang from the appliance.
Keep the appliance, including the power cable, at a safe distance from heated surfaces and open fires.
Keep the appliance and power plug away from water and other liquids.
Keep the appliance and power plug away from chemicals such as pesticides and deodorants. Place the air purifier on the floor or a stable surface to prevent tipping.
Do not use the appliance outdoors or in wet environments such as bathrooms, laundry rooms or pool areas.
Always turn off and disconnect the appliance from the power supply before moving the unit, changing filters, cleaning or carrying out maintenance procedures.
Never clean with gasoline, chemical solvents, or corrosive materials as these agents may damage the air purifier.

Regulatory information

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003. This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

FCC/ISED RF Exposure Information
This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

Product map

User interface
Air outlet
Air quality indicator (AQI)
Fan motor
Silencer
Particle & carbon filter
Washable fabric pre-filter

Air quality status (PM 2.5)
The air purifier has a particle sensor to measure the fine particles (PM2.5) level. The LED indicator displays air quality status in 5 colors from excellent (blue) to very polluted (red).

Blueair-311i-Max-Blue-Pure-Air-Purifier-FEATURED

Getting started

ON/Standby button
Fan Speed button
Auto mode
Night mode (lowest speed setting
Speed 1
Speed 2
Speed 3
Filter replacement
Wi-Fi

Two button control
Press the ON/Standby button to turn the air purifier. Adjust the mode and the fan speed using the Fan Speed button. This air purifier has a total of four fan speeds – Night mode being the lowest/most silent one, Speed three being the highest one.

Auto mode
Automatically adjusts the fan speed based on your PM2.5 indoor level to ensure optimal air quality. Recommended setting.

Night mode

The lowest fan speed and fully dimmed lights

Fan speeds 1–2-3 Fan speed levels which you can manually set it by pressing the Fan Speed button on the interface or adjust via the Blueair app

How to use tips

Change brightness
Press the Fan Speed button and On/Standby button at the same time. Hold for three seconds. Then, keep holding your finger on the On/Standby button and tap the Fan Speed button with the other finger to adjust brightness. If the brightness is on the lowest level, then it will increase by one level. If the brightness is on the highest level, then it will decrease by one level.

Enable/disable Wi-Fi/Bluetooth
Wi-Fi is on by default. Long press the Fan Speed button for about 5 seconds (until all the LEDs of the interface light up and blink once). Then release. When the connection is enabled, the Wi-Fi LED will blink. After successfully connecting the appliance to the app, the Wi-Fi LED will stay solid. Wi-Fi LED off means the connection has been disabled.

Enable/disable Child lock
Long press On/Standby button for about 5 seconds (until all the LEDs of the interface light up and blink once). Then release. When the Child lock is on the air purifier will continue to operate but the speed/mode button will be locked.

Filter reset
Extra long-press the Fan Speed button for about 15 seconds (until all the LEDs of the interface light up for the second time and blink once). Then release. After replacing the filter, it is required to manually conduct a filter reset on the appliance. If done correctly, the red filter replacement indicator will blink three times and then disappear.

Factory reset
Extra long-press the On/Standby button for about 30 seconds (until all the LEDs of the interface light up for the second time and blink four times). Then release. After the factory reset, the air purifier restarts with the default configuration and will go into Standby mode.

Connect to the Blueair app

Connecting to the Blueair app allows you to control the air purifier remotely and monitor filter usage. The app offers additional functions to the air purifier.

Step 1
Download the Blueair app from the App Store or Google Play.

Step 2
Open the app. Create or sign into your Blueair account.

Step 3
Click on Connect Product and select Blue Pure Max. Follow the instructions to complete app pairing.

First-time connection tips

Make sure to turn on your air purifier. Once the Wi-Fi indicator is blinking, it is ready to be paired with your app. Make sure you are using a visible Wi- Fi network that is not hidden. VPN (Virtual Private Network) should be deactivated while using the Blueair App. Bluetooth is required for first-time pairing. Turn your phone’s Bluetooth on and keep your phone within 3ft of the air purifier for initial pairing.

This air purifier can only connect to 2.4 GHz Wi-Fi. If you are using a dual- band Wi-Fi router, make sure to select 2.4GHz.

Keep your air purifier within 15 feet of your Wi-Fi router to maintain an optimal connection.

Maintenance information

Important! Turn the air purifier off and disconnect the air purifier from the power supply before maintenance.
Changing your filter When your air purifier’s indicator light turns red, it’s time to change the main filter. This will occur sometime between 6 and 9 months of operation, depending on usage and your air quality conditions.

Step 1
Turn off the air purifier and unplug it. Rotate the top counter-clockwise to unlock it, then lift up to remove it.

Step 2
Remove the fabric pre-filter and the silencer

Step 3
Use the filter handles to pull out the old filter and replace it with a new one. Make sure to remove plastic wrapping before inserting the new filter in the appliance

Step 4
Place the silencer back on top of the filter. Pull up the fabric pre-filter over the filter and the silencer. (Please ensure that the leather tag is on the upper side of the fabric pre-filter.)

Step 5
Twist the top back on and plug in the air purifier

Step 6
Important! Turn the air purifier back on and reset the filter indicator by pressing the Fan Speed button for 15 seconds. (until all the LEDs of the interface light up for the second time and blink once). Then release.

Cleaning your washable pre-filter

Clean your pre-filter regularly when you see dust or dirt. Vacuum the exterior of the fabric with a soft brush attachment. If the pre-filter requires deeper cleaning, wash according to the instructions on the pre-filters label. Hang to dry.

Blueair-311i-Max-Blue-Pure-Air-Purifier-FIG-25

Disposal and recycling

This air purifier should be recycled as electronic waste. If you have any questions regarding the disposal of this air purifier, please contact your local waste management for the best way to recycle it.