CRYSTORAMA GAM71005AG Gamma 1 Light Pendant Instruction Manual

LIGHTING THE WAY FOR SIXTY YEARS
ASSEMBLY INSTRUCTION MODEL #GAM71005AG

GAM71005AG Gamma 1 Light Pendant

All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes

You will need 1- Medium Base Bulb 40 Watts recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED USE The fixture is Dry rated

HOW TO INSTALL:

Place the fixture parts on a soft cloth-covered platform before installation of fixture.

1. Decide the preferred hanging height and choose the correct length of rods needed.

2.  Feed the wire through the rods and screw them together. Screw one end of the rod assembly onto the swivel on the canopy.

3. Install the mounting plate onto the outlet box.

4. Raise the fixture up to the ceiling and do the wire connections.
   Secure the canopy with the screws.

5. Screw the shade assembly onto the other end of the rod assembly

WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm.
For more information go to www.p65warnings.ca.gov

Part Number

Part Numbers
A. (2)-Wire Connector
B. (1)-Mounting plate
C. (2)-Mounting Screw
D. (2)-Screw
E. (1)-Swivel
F. (1)-Canopy; W5″xH1 ” ; with 2 side holes; XSN71003AGCAN5IN
G. (1)-H6″ ROD; XSN71003AGROD6IN
H. (3)-H12″ ROD; XSN71003AGROD12IN
I. (1)-Shade assembly ; H15″; XSN71005AGSHA25IN

https://www.crystorama.com/

References

• Crystorama Lighting
• p65warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>