anko 43286577 Tablet and Smartphone Floor Stand Instruction Manual

Table of Contents

Unpack the device and check if all parts are there and undamaged. If any parts are missing or damaged, return the product to Kmart for replacement.
Danger of suffocation! Keep all packaging materials away from children.
Remove all protective foils and packaging materials before using the device.
Safety Instructions:
- Please read the instruction manual before using this device and follow all safety instructions to avoid damage caused by improper use.
- Keep the instruction manual for future reference. If you give this device to a third party, make sure to hand over the instruction manual as well.
- Do not immerse the device in water or other liquids.
- Do not use the device in wet conditions.
- Do not use the tripod in windy conditions or on an uneven surface.
- Do not use the device if it is damaged.
- This device is not a toy. Children should be supervised to ensure they do not play with the device.
Assembly and Use:
Unscrew the nut to unfold the tripod and place it on a flat surface. Then, tighten the screw again
Install the telescopic rod to the desired length and tighten the screw.
Repeat steps 2 and 3.
Unscrew the screw nut behind the holder.
Put the nut into the ball joint and aim the rotation ball axis into the hole.
Push the axis into the nut and secure the nut.
Repeat steps 2 and 3.
The assembly is now completed. Mount the tablet or smartphone on the floor stand using the appropriate mount assembly method. For smartphones, use the same method as for tablets.

Unpack the device and check if all parts are there and undamaged. Should this not be the case, return the product to Kmart for replacement.
Danger of suffocation! Keep all packaging materials away from children.
Remove all protective foils and packaging material prior to use.

Please read the instruction manual before using this device and follow all the safety instructions to avoid damage caused by improper use.

Keep the instruction manual for future reference. Should this device be given to a third party, then this instruction manual must also be handed over.
Do not immerse the device in water or in other liquids.
Keep the device away from all hot surfaces and naked flames.
Do not use the device in wet conditions.
Do not use the tripod in windy conditions or on an uneven surface.
Do not use the device if it is damaged.
This device is not a toy. Children should be supervised to ensure they do not play with the device.

Unscrew to nut to unfold the tripod to place it on a flat surface, tighten the screw again. $anko-43286577-Tablet-and-Smartphone-Floor-Stand-fig-1 $2$$
Install the telescopic rod to the desired length, tighten the screw
Same as Step 2.
Same as Step 2.
Unscrew the screw nut behind the holder.
Put the nut into the ball joint, aimed the rotation ball axis into the hole. $anko-43286577-Tablet-and-Smartphone-Floor-Stand-fig-1 $7$$
Push the axis into the nut and secure the nut. $anko-43286577-Tablet-and-Smartphone-Floor-Stand-fig-1 $8$$
Assembly completed. Mount the device on the floor stand, ready to use. $anko-43286577-Tablet-and-Smartphone-Floor-Stand-fig-1 $9$$
The additional smartphone mount assembly method is same as tablet mount.