carmanah MX SPE-1000 Runway Beacon Installation Guide
- May 15, 2024
- carmanah
Table of Contents
MX SPE-1000 Runway Beacon
Installation Guide
MX SPE-1000
INSTALL GUIDE
SUPPLEMENT
MX SPE-1000 Runway Beacon
-
CAUTION: Supplementary overcurrent protection only. For AC systems, ensure branch rated overcurrent protection is provided.
CAUTION: Supplementary overcurrent protection only. Ensure branch rated overcurrent protection is provided -
If adjacent cabling routed in the same pole or conduit carries voltages greater than 300V, consider cable insulation ratings and use of cable sleeving or wrap.
CAUTION: If adjacent cabling routed in the same pole or conduit carries voltages greater than 300V, consider cable Insulation ratings and use of cable sleeving or wrap
͏For Solar System ground connection:
- Remove ground screw next to ground symbol label.
- Crimp the provided 12-10 AWG or 18-14 AWG ring terminal using a suitable tool onto the system ground wire (provided by installer) and fasten to standoff with screw removed in previous step.
- Secure ground wire with cable tie.
Battery Disconnect Wire Diagrams:
- Single Battery System:
- Dual Battery System
© 2023 Carmanah Technologies Corporation
Technical Support:
Email: customersupport@carmanah.com
Toll Free: 1.877.722.8877 (US & Canada)
Worldwide: 1.250.380.0052
Fax: 1.250.380.0062
Web: carmanah.com
Carmanah Technologies Corp.
250 Bay St, Victoria, BC V9A 3K5,
Canada | 1.250.380.0052
customersupport@carmanah.com
carmanah.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>