carmanah SPE-1000 Rectangular Rapid Flashing Beacons Installation Guide
- May 15, 2024
- carmanah
Table of Contents
carmanah SPE-1000 Rectangular Rapid Flashing Beacons
INSTALLATION AND USING INSTRUCTION
- RRFB module package contents
- Remove the cover & bracket screws. Install mounting bracket onto a pole (hardware not included).
- Mount RRFB to the mounting bracket and install bracket screws. Aim RRFB then tighten screws with 1/8″ hex key.
- RRFB wiring layouts
- Punch required holes in the grommet with a suitable round tool to avoid tearing (e.g., 0.063″ punch). Insert cables then push the grommet into sheet metal hole. Pull ~9″ cable through the grommet; strip jacket 2.5 – 3″.
- Wire power module to RRFB (some wires hidden for clarity)
- Wire trigger/push button to RRFB (some wires hidden for clarity)
- Wire additional RRFB (some wires hidden for clarity)
- Loop cables and secure with cable tie as shown.
- Install optional pedestrian confirmation light masking
- Install cover and cover screws
- TO COMPLETE SETUP: Use MX Field App to program/link modules and change default settings.
- Download: carmanah.com/app
- FOR REMOTE ACCESS: Log into MX Cloud: MXcloud.live
Maintenance
Periodically clean the surface of the product with water and a soft cloth. A mild non-abrasive cleanser can be used for more stubborn residue. Clean more frequently during drier months. Check for any damaged, missing or broken hardware.
Warranty
This product is covered by the Carmanah warranty. Failure to comply with the use, storage, maintenance or installation instructions detailed in the supplied documentation could void the warranty.
- Email: customersupport@carmanah.com
- Toll Free: 1.877.722.8877 (US & Canada)
- Worldwide: 1.250.380.0052
- Web: carmanah.com
Read User Manual Online (PDF format)
Loading......